[dpdk-dev] [PATCH 1/2] ethdev: add packet mode in meter profile structure

[Dumitrescu, Cristian]

Hi Li,

> -----Original Message-----
> From: Li Zhang <lizh at nvidia.com>
> Sent: Wednesday, March 31, 2021 9:54 AM
> To: dekelp at nvidia.com; orika at nvidia.com; viacheslavo at nvidia.com;
> matan at nvidia.com; shahafs at nvidia.com; Dumitrescu, Cristian
> <cristian.dumitrescu at intel.com>; Thomas Monjalon
> <thomas at monjalon.net>; Yigit, Ferruh <ferruh.yigit at intel.com>; Andrew
> Rybchenko <andrew.rybchenko at oktetlabs.ru>
> Cc: dev at dpdk.org; rasland at nvidia.com; roniba at nvidia.com
> Subject: [PATCH 1/2] ethdev: add packet mode in meter profile structure
> 
> Currently meter algorithms only supports rate is bytes per second(BPS).
> Add packet_mode flag in meter profile parameters data structure.
> So that it can meter traffic by packet per second.
> 
> When packet_mode is 0, the profile rates and bucket sizes are
> specified in bytes per second and bytes
> when packet_mode is not 0, the profile rates and bucket sizes are
> specified in packets and packets per second.
> 
> The below structure will be extended:
> rte_mtr_meter_profile
> rte_mtr_capabilities
> 
> Signed-off-by: Li Zhang <lizh at nvidia.com>
> ---
>  doc/guides/rel_notes/release_21_05.rst |  7 ++
>  lib/librte_ethdev/rte_mtr.h            | 89 ++++++++++++++++++++++----
>  2 files changed, 85 insertions(+), 11 deletions(-)
> 
> diff --git a/doc/guides/rel_notes/release_21_05.rst
> b/doc/guides/rel_notes/release_21_05.rst
> index 3c76148b11..c9c15794ad 100644
> --- a/doc/guides/rel_notes/release_21_05.rst
> +++ b/doc/guides/rel_notes/release_21_05.rst
> @@ -119,6 +119,13 @@ New Features
>    * Added command to display Rx queue used descriptor count.
>      ``show port (port_id) rxq (queue_id) desc used count``
> 
> +* **Added support for meter PPS profile.**
> +
> +  Currently meter algorithms only supports bytes per second(BPS).
> +  Add packet_mode in the meter profile parameters data structures
> +  to support packet per second (PPS) mode.
> +  So that it can meter traffic by packet per second.
> +  Packet_mode must be 0 when it is bytes mode.
> 
>  Removed Items
>  -------------
> diff --git a/lib/librte_ethdev/rte_mtr.h b/lib/librte_ethdev/rte_mtr.h
> index e1dc59eb06..52611a90f5 100644
> --- a/lib/librte_ethdev/rte_mtr.h
> +++ b/lib/librte_ethdev/rte_mtr.h
> @@ -133,46 +133,71 @@ struct rte_mtr_meter_profile {
>  	union {
>  		/** Items only valid when *alg* is set to srTCM - RFC 2697. */
>  		struct {
> -			/** Committed Information Rate (CIR)
> (bytes/second). */
> +			/**
> +			 * Committed Information Rate (CIR)
> +			 * (bytes per second or packets per second).
> +			 */
>  			uint64_t cir;
> 
> -			/** Committed Burst Size (CBS) (bytes). */
> +			/** Committed Burst Size (CBS) (bytes or packets). */
>  			uint64_t cbs;
> 
> -			/** Excess Burst Size (EBS) (bytes). */
> +			/** Excess Burst Size (EBS) (bytes or packets). */
>  			uint64_t ebs;
>  		} srtcm_rfc2697;
> 
>  		/** Items only valid when *alg* is set to trTCM - RFC 2698. */
>  		struct {
> -			/** Committed Information Rate (CIR)
> (bytes/second). */
> +			/**
> +			 * Committed Information Rate (CIR)
> +			 * (bytes per second or packets per second).
> +			 */
>  			uint64_t cir;
> 
> -			/** Peak Information Rate (PIR) (bytes/second). */
> +			/**
> +			 * Peak Information Rate (PIR)
> +			 * (bytes per second or packets per second).
> +			 */
>  			uint64_t pir;
> 
> -			/** Committed Burst Size (CBS) (byes). */
> +			/** Committed Burst Size (CBS) (bytes or packets). */
>  			uint64_t cbs;
> 
> -			/** Peak Burst Size (PBS) (bytes). */
> +			/** Peak Burst Size (PBS) (bytes or packets). */
>  			uint64_t pbs;
>  		} trtcm_rfc2698;
> 
>  		/** Items only valid when *alg* is set to trTCM - RFC 4115. */
>  		struct {
> -			/** Committed Information Rate (CIR)
> (bytes/second). */
> +			/**
> +			 * Committed Information Rate (CIR)
> +			 * (bytes per second or packets per second).
> +			 */
>  			uint64_t cir;
> 
> -			/** Excess Information Rate (EIR) (bytes/second). */
> +			/**
> +			 * Excess Information Rate (EIR)
> +			 * (bytes per second or packets per second).
> +			 */
>  			uint64_t eir;
> 
> -			/** Committed Burst Size (CBS) (byes). */
> +			/** Committed Burst Size (CBS) (bytes or packets). */
>  			uint64_t cbs;
> 
> -			/** Excess Burst Size (EBS) (bytes). */
> +			/** Excess Burst Size (EBS) (bytes or packets). */
>  			uint64_t ebs;
>  		} trtcm_rfc4115;
>  	};
> +
> +	/**
> +	 * When zero, the byte mode is enabled for the current profile, so
> the
> +	 * *rate* and *size* fields are specified in bytes per second
> +	 * and bytes, respectively.
> +	 * When non-zero, the packet mode is enabled for the current
> profile,
> +	 * so the *rate* and *size* fields are specified in packets per second
> +	 * and packets, respectively.
> +	 */
> +	int packet_mode;
>  };
> 
>  /**
> @@ -333,6 +358,48 @@ struct rte_mtr_capabilities {
>  	 */
>  	int color_aware_trtcm_rfc4115_supported;
> 
> +	/**
> +	 * srTCM rfc2697 byte mode supported.
> +	 * When non-zero, it indicates that byte mode is supported for
> +	 * the srTCM RFC 2697 metering algorithm.
> +	 */
> +	int srtcm_rfc2697_byte_mode_supported;
> +
> +	/**
> +	 * srTCM rfc2697 packet mode supported.
> +	 * When non-zero, it indicates that packet mode is supported for
> +	 * the srTCM RFC 2697 metering algorithm.
> +	 */
> +	int srtcm_rfc2697_packet_mode_supported;
> +
> +	/**
> +	 * trTCM rfc2698 byte mode supported.
> +	 * When non-zero, it indicates that byte mode is supported for
> +	 * the trTCM RFC 2698 metering algorithm.
> +	 */
> +	int trtcm_rfc2698_byte_mode_supported;
> +
> +	/**
> +	 * trTCM rfc2698 packet mode supported.
> +	 * When non-zero, it indicates that packet mode is supported for
> +	 * the trTCM RFC 2698 metering algorithm.
> +	 */
> +	int trtcm_rfc2698_packet_mode_supported;
> +
> +	/**
> +	 * trTCM rfc4115 byte mode supported.
> +	 * When non-zero, it indicates that byte mode is supported for
> +	 * the trTCM RFC 4115 metering algorithm.
> +	 */
> +	int trtcm_rfc4115_byte_mode_supported;
> +
> +	/**
> +	 * trTCM rfc4115 packet mode supported.
> +	 * When non-zero, it indicates that packet mode is supported for
> +	 * the trTCM RFC 4115 metering algorithm.
> +	 */
> +	int trtcm_rfc4115_packet_mode_supported;
> +
>  	/** Set of supported statistics counter types.
>  	 * @see enum rte_mtr_stats_type
>  	 */
> --
> 2.27.0

These API updates look good to me, but please add the necessary checks to the existing drivers implementing the rte_mtr API to makes sure that profiles with packet_mode set to TRUE are rejected.

For the Soft NIC driver, this is a simple check in file drivers/net/softnic/rte_eth_softnic_meter.c, function meter_profile_check. Thanks!

Regards,
Cristian