[dpdk-dev] [PATCH v3 02/10] vdpa/sfc: add support for device initialization
Mattias Rönnblom
hofors at lysator.liu.se
Fri Oct 29 22:21:00 CEST 2021
On 2021-10-29 16:46, Vijay Srivastava wrote:
> From: Vijay Kumar Srivastava <vsrivast at xilinx.com>
>
> Add HW initialization and vDPA device registration support.
>
> Signed-off-by: Vijay Kumar Srivastava <vsrivast at xilinx.com>
> Acked-by: Andrew Rybchenko <andrew.rybchenko at oktetlabs.ru>
> ---
> v2:
> * Used rte_memzone_reserve_aligned for mcdi buffer allocation.
> * Freeing mcdi buff when DMA map fails.
> * Fixed one typo.
>
> doc/guides/vdpadevs/sfc.rst | 6 +
> drivers/vdpa/sfc/meson.build | 3 +
> drivers/vdpa/sfc/sfc_vdpa.c | 23 +++
> drivers/vdpa/sfc/sfc_vdpa.h | 49 +++++-
> drivers/vdpa/sfc/sfc_vdpa_debug.h | 21 +++
> drivers/vdpa/sfc/sfc_vdpa_hw.c | 327 ++++++++++++++++++++++++++++++++++++++
> drivers/vdpa/sfc/sfc_vdpa_log.h | 3 +
> drivers/vdpa/sfc/sfc_vdpa_mcdi.c | 74 +++++++++
> drivers/vdpa/sfc/sfc_vdpa_ops.c | 129 +++++++++++++++
> drivers/vdpa/sfc/sfc_vdpa_ops.h | 36 +++++
> 10 files changed, 670 insertions(+), 1 deletion(-)
> create mode 100644 drivers/vdpa/sfc/sfc_vdpa_debug.h
> create mode 100644 drivers/vdpa/sfc/sfc_vdpa_hw.c
> create mode 100644 drivers/vdpa/sfc/sfc_vdpa_mcdi.c
> create mode 100644 drivers/vdpa/sfc/sfc_vdpa_ops.c
> create mode 100644 drivers/vdpa/sfc/sfc_vdpa_ops.h
>
> diff --git a/doc/guides/vdpadevs/sfc.rst b/doc/guides/vdpadevs/sfc.rst
> index 44e694f..d06c427 100644
> --- a/doc/guides/vdpadevs/sfc.rst
> +++ b/doc/guides/vdpadevs/sfc.rst
> @@ -95,3 +95,9 @@ SFC vDPA PMD provides the following log types available for control:
> Matches a subset of per-port log types registered during runtime.
> A full name for a particular type may be obtained by appending a
> dot and a PCI device identifier (``XXXX:XX:XX.X``) to the prefix.
> +
> +- ``pmd.vdpa.sfc.mcdi`` (default level is **notice**)
> +
> + Extra logging of the communication with the NIC's management CPU.
> + The format of the log is consumed by the netlogdecode cross-platform
> + tool. May be managed per-port, as explained above.
> diff --git a/drivers/vdpa/sfc/meson.build b/drivers/vdpa/sfc/meson.build
> index 4255d65..dc333de 100644
> --- a/drivers/vdpa/sfc/meson.build
> +++ b/drivers/vdpa/sfc/meson.build
> @@ -19,4 +19,7 @@ endforeach
> deps += ['common_sfc_efx', 'bus_pci']
> sources = files(
> 'sfc_vdpa.c',
> + 'sfc_vdpa_hw.c',
> + 'sfc_vdpa_mcdi.c',
> + 'sfc_vdpa_ops.c',
> )
> diff --git a/drivers/vdpa/sfc/sfc_vdpa.c b/drivers/vdpa/sfc/sfc_vdpa.c
> index d85c52b..b7eca56 100644
> --- a/drivers/vdpa/sfc/sfc_vdpa.c
> +++ b/drivers/vdpa/sfc/sfc_vdpa.c
> @@ -232,6 +232,19 @@ struct sfc_vdpa_adapter *
> goto fail_vfio_setup;
> }
>
> + sfc_vdpa_log_init(sva, "hw init");
> + if (sfc_vdpa_hw_init(sva) != 0) {
> + sfc_vdpa_err(sva, "failed to init HW %s", pci_dev->name);
> + goto fail_hw_init;
> + }
> +
> + sfc_vdpa_log_init(sva, "dev init");
> + sva->ops_data = sfc_vdpa_device_init(sva, SFC_VDPA_AS_VF);
> + if (sva->ops_data == NULL) {
> + sfc_vdpa_err(sva, "failed vDPA dev init %s", pci_dev->name);
> + goto fail_dev_init;
> + }
> +
> pthread_mutex_lock(&sfc_vdpa_adapter_list_lock);
> TAILQ_INSERT_TAIL(&sfc_vdpa_adapter_list, sva, next);
> pthread_mutex_unlock(&sfc_vdpa_adapter_list_lock);
> @@ -240,6 +253,12 @@ struct sfc_vdpa_adapter *
>
> return 0;
>
> +fail_dev_init:
> + sfc_vdpa_hw_fini(sva);
> +
> +fail_hw_init:
> + sfc_vdpa_vfio_teardown(sva);
> +
> fail_vfio_setup:
> fail_set_log_prefix:
> rte_free(sva);
> @@ -266,6 +285,10 @@ struct sfc_vdpa_adapter *
> TAILQ_REMOVE(&sfc_vdpa_adapter_list, sva, next);
> pthread_mutex_unlock(&sfc_vdpa_adapter_list_lock);
>
> + sfc_vdpa_device_fini(sva->ops_data);
> +
> + sfc_vdpa_hw_fini(sva);
> +
> sfc_vdpa_vfio_teardown(sva);
>
> rte_free(sva);
> diff --git a/drivers/vdpa/sfc/sfc_vdpa.h b/drivers/vdpa/sfc/sfc_vdpa.h
> index 3b77900..046f25d 100644
> --- a/drivers/vdpa/sfc/sfc_vdpa.h
> +++ b/drivers/vdpa/sfc/sfc_vdpa.h
> @@ -11,14 +11,38 @@
>
> #include <rte_bus_pci.h>
>
> +#include "sfc_efx.h"
> +#include "sfc_efx_mcdi.h"
> +#include "sfc_vdpa_debug.h"
> #include "sfc_vdpa_log.h"
> +#include "sfc_vdpa_ops.h"
> +
> +#define SFC_VDPA_DEFAULT_MCDI_IOVA 0x200000000000
>
> /* Adapter private data */
> struct sfc_vdpa_adapter {
> TAILQ_ENTRY(sfc_vdpa_adapter) next;
> + /*
> + * PMD setup and configuration is not thread safe. Since it is not
> + * performance sensitive, it is better to guarantee thread-safety
> + * and add device level lock. vDPA control operations which
> + * change its state should acquire the lock.
> + */
> + rte_spinlock_t lock;
> struct rte_pci_device *pdev;
> struct rte_pci_addr pci_addr;
>
> + efx_family_t family;
> + efx_nic_t *nic;
> + rte_spinlock_t nic_lock;
> +
> + efsys_bar_t mem_bar;
> +
> + struct sfc_efx_mcdi mcdi;
> + size_t mcdi_buff_size;
> +
> + uint32_t max_queue_count;
> +
> char log_prefix[SFC_VDPA_LOG_PREFIX_MAX];
> uint32_t logtype_main;
>
> @@ -26,6 +50,7 @@ struct sfc_vdpa_adapter {
> int vfio_dev_fd;
> int vfio_container_fd;
> int iommu_group_num;
> + struct sfc_vdpa_ops_data *ops_data;
> };
>
> uint32_t
> @@ -36,5 +61,27 @@ struct sfc_vdpa_adapter {
> struct sfc_vdpa_adapter *
> sfc_vdpa_get_adapter_by_dev(struct rte_pci_device *pdev);
>
> -#endif /* _SFC_VDPA_H */
> +int
> +sfc_vdpa_hw_init(struct sfc_vdpa_adapter *sva);
> +void
> +sfc_vdpa_hw_fini(struct sfc_vdpa_adapter *sva);
>
> +int
> +sfc_vdpa_mcdi_init(struct sfc_vdpa_adapter *sva);
> +void
> +sfc_vdpa_mcdi_fini(struct sfc_vdpa_adapter *sva);
> +
> +int
> +sfc_vdpa_dma_alloc(struct sfc_vdpa_adapter *sva, const char *name,
> + size_t len, efsys_mem_t *esmp);
> +
> +void
> +sfc_vdpa_dma_free(struct sfc_vdpa_adapter *sva, efsys_mem_t *esmp);
> +
> +static inline struct sfc_vdpa_adapter *
> +sfc_vdpa_adapter_by_dev_handle(void *dev_handle)
> +{
> + return (struct sfc_vdpa_adapter *)dev_handle;
> +}
> +
> +#endif /* _SFC_VDPA_H */
> diff --git a/drivers/vdpa/sfc/sfc_vdpa_debug.h b/drivers/vdpa/sfc/sfc_vdpa_debug.h
> new file mode 100644
> index 0000000..cfa8cc5
> --- /dev/null
> +++ b/drivers/vdpa/sfc/sfc_vdpa_debug.h
> @@ -0,0 +1,21 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + *
> + * Copyright(c) 2020-2021 Xilinx, Inc.
> + */
> +
> +#ifndef _SFC_VDPA_DEBUG_H_
> +#define _SFC_VDPA_DEBUG_H_
> +
> +#include <rte_debug.h>
> +
> +#ifdef RTE_LIBRTE_SFC_VDPA_DEBUG
> +/* Avoid dependency from RTE_LOG_DP_LEVEL to be able to enable debug check
> + * in the driver only.
> + */
> +#define SFC_VDPA_ASSERT(exp) RTE_VERIFY(exp)
> +#else
> +/* If the driver debug is not enabled, follow DPDK debug/non-debug */
> +#define SFC_VDPA_ASSERT(exp) RTE_ASSERT(exp)
> +#endif
> +
> +#endif /* _SFC_VDPA_DEBUG_H_ */
> diff --git a/drivers/vdpa/sfc/sfc_vdpa_hw.c b/drivers/vdpa/sfc/sfc_vdpa_hw.c
> new file mode 100644
> index 0000000..7c256ff
> --- /dev/null
> +++ b/drivers/vdpa/sfc/sfc_vdpa_hw.c
> @@ -0,0 +1,327 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + *
> + * Copyright(c) 2020-2021 Xilinx, Inc.
> + */
> +
> +#include <unistd.h>
> +
> +#include <rte_common.h>
> +#include <rte_errno.h>
> +#include <rte_vfio.h>
> +
> +#include "efx.h"
> +#include "sfc_vdpa.h"
> +#include "sfc_vdpa_ops.h"
> +
> +extern uint32_t sfc_logtype_driver;
> +
> +#ifndef PAGE_SIZE
> +#define PAGE_SIZE (sysconf(_SC_PAGESIZE))
> +#endif
> +
> +int
> +sfc_vdpa_dma_alloc(struct sfc_vdpa_adapter *sva, const char *name,
> + size_t len, efsys_mem_t *esmp)
> +{
> + uint64_t mcdi_iova;
> + size_t mcdi_buff_size;
> + const struct rte_memzone *mz = NULL;
Redundant initialization.
> + int numa_node = sva->pdev->device.numa_node;
> + int ret;
> +
> + mcdi_buff_size = RTE_ALIGN_CEIL(len, PAGE_SIZE);
> +
> + sfc_vdpa_log_init(sva, "name=%s, len=%zu", name, len);
> +
> + mz = rte_memzone_reserve_aligned(name, mcdi_buff_size,
> + numa_node,
> + RTE_MEMZONE_IOVA_CONTIG,
> + PAGE_SIZE);
> + if (mz == NULL) {
> + sfc_vdpa_err(sva, "cannot reserve memory for %s: len=%#x: %s",
> + name, (unsigned int)len, rte_strerror(rte_errno));
> + return -ENOMEM;
> + }
> +
> + /* IOVA address for MCDI would be re-calculated if mapping
> + * using default IOVA would fail.
> + * TODO: Earlier there was no way to get valid IOVA range.
> + * Recently a patch has been submitted to get the IOVA range
> + * using ioctl. VFIO_IOMMU_GET_INFO. This patch is available
> + * in the kernel version >= 5.4. Support to get the default
> + * IOVA address for MCDI buffer using available IOVA range
> + * would be added later. Meanwhile default IOVA for MCDI buffer
> + * is kept at high mem at 2TB. In case of overlap new available
> + * addresses would be searched and same would be used.
> + */
> + mcdi_iova = SFC_VDPA_DEFAULT_MCDI_IOVA;
> +
> + do {
> + ret = rte_vfio_container_dma_map(sva->vfio_container_fd,
> + (uint64_t)mz->addr, mcdi_iova,
> + mcdi_buff_size);
> + if (ret == 0)
> + break;
> +
> + mcdi_iova = mcdi_iova >> 1;
> + if (mcdi_iova < mcdi_buff_size) {
> + sfc_vdpa_err(sva,
> + "DMA mapping failed for MCDI : %s",
> + rte_strerror(rte_errno));
> + rte_memzone_free(mz);
> + return ret;
> + }
> +
> + } while (ret < 0);
"ret < 0" will never evaluate to false here. Use "for (;;)" instead.
> +
> + esmp->esm_addr = mcdi_iova;
> + esmp->esm_base = mz->addr;
> + sva->mcdi_buff_size = mcdi_buff_size;
> +
> + sfc_vdpa_info(sva,
> + "DMA name=%s len=%zu => virt=%p iova=%" PRIx64,
> + name, len, esmp->esm_base, esmp->esm_addr);
> +
> + return 0;
> +}
> +
> +void
> +sfc_vdpa_dma_free(struct sfc_vdpa_adapter *sva, efsys_mem_t *esmp)
> +{
> + int ret;
> +
> + sfc_vdpa_log_init(sva, "name=%s", esmp->esm_mz->name);
> +
> + ret = rte_vfio_container_dma_unmap(sva->vfio_container_fd,
> + (uint64_t)esmp->esm_base,
> + esmp->esm_addr, sva->mcdi_buff_size);
> + if (ret < 0)
> + sfc_vdpa_err(sva, "DMA unmap failed for MCDI : %s",
> + rte_strerror(rte_errno));
> +
> + sfc_vdpa_info(sva,
> + "DMA free name=%s => virt=%p iova=%" PRIx64,
> + esmp->esm_mz->name, esmp->esm_base, esmp->esm_addr);
> +
> + rte_free((void *)(esmp->esm_base));
> +
> + sva->mcdi_buff_size = 0;
> + memset(esmp, 0, sizeof(*esmp));
> +}
> +
> +static int
> +sfc_vdpa_mem_bar_init(struct sfc_vdpa_adapter *sva,
> + const efx_bar_region_t *mem_ebrp)
> +{
> + struct rte_pci_device *pci_dev = sva->pdev;
> + efsys_bar_t *ebp = &sva->mem_bar;
> + struct rte_mem_resource *res =
> + &pci_dev->mem_resource[mem_ebrp->ebr_index];
> +
> + SFC_BAR_LOCK_INIT(ebp, pci_dev->name);
> + ebp->esb_rid = mem_ebrp->ebr_index;
> + ebp->esb_dev = pci_dev;
> + ebp->esb_base = res->addr;
> +
> + return 0;
> +}
> +
> +static void
> +sfc_vdpa_mem_bar_fini(struct sfc_vdpa_adapter *sva)
> +{
> + efsys_bar_t *ebp = &sva->mem_bar;
> +
> + SFC_BAR_LOCK_DESTROY(ebp);
> + memset(ebp, 0, sizeof(*ebp));
> +}
> +
> +static int
> +sfc_vdpa_nic_probe(struct sfc_vdpa_adapter *sva)
> +{
> + efx_nic_t *enp = sva->nic;
> + int rc;
> +
> + rc = efx_nic_probe(enp, EFX_FW_VARIANT_DONT_CARE);
> + if (rc != 0)
> + sfc_vdpa_err(sva, "nic probe failed: %s", rte_strerror(rc));
> +
> + return rc;
> +}
> +
> +static int
> +sfc_vdpa_estimate_resource_limits(struct sfc_vdpa_adapter *sva)
> +{
> + efx_drv_limits_t limits;
> + int rc;
> + uint32_t evq_allocated;
> + uint32_t rxq_allocated;
> + uint32_t txq_allocated;
> + uint32_t max_queue_cnt;
> +
> + memset(&limits, 0, sizeof(limits));
Avoid using typedefs for structs. This is a struct?
> +
> + /* Request at least one Rx and Tx queue */
> + limits.edl_min_rxq_count = 1;
> + limits.edl_min_txq_count = 1;
> + /* Management event queue plus event queue for Tx/Rx queue */
> + limits.edl_min_evq_count =
> + 1 + RTE_MAX(limits.edl_min_rxq_count, limits.edl_min_txq_count);
> +
> + limits.edl_max_rxq_count = SFC_VDPA_MAX_QUEUE_PAIRS;
> + limits.edl_max_txq_count = SFC_VDPA_MAX_QUEUE_PAIRS;
> + limits.edl_max_evq_count = 1 + SFC_VDPA_MAX_QUEUE_PAIRS;
> +
> + SFC_VDPA_ASSERT(limits.edl_max_evq_count >= limits.edl_min_rxq_count);
> + SFC_VDPA_ASSERT(limits.edl_max_rxq_count >= limits.edl_min_rxq_count);
> + SFC_VDPA_ASSERT(limits.edl_max_txq_count >= limits.edl_min_rxq_count);
> +
> + /* Configure the minimum required resources needed for the
> + * driver to operate, and the maximum desired resources that the
> + * driver is capable of using.
> + */
> + sfc_vdpa_log_init(sva, "set drv limit");
> + efx_nic_set_drv_limits(sva->nic, &limits);
> +
> + sfc_vdpa_log_init(sva, "init nic");
> + rc = efx_nic_init(sva->nic);
> + if (rc != 0) {
> + sfc_vdpa_err(sva, "nic init failed: %s", rte_strerror(rc));
> + goto fail_nic_init;
> + }
> +
> + /* Find resource dimensions assigned by firmware to this function */
> + rc = efx_nic_get_vi_pool(sva->nic, &evq_allocated, &rxq_allocated,
> + &txq_allocated);
> + if (rc != 0) {
> + sfc_vdpa_err(sva, "vi pool get failed: %s", rte_strerror(rc));
> + goto fail_get_vi_pool;
> + }
> +
> + /* It still may allocate more than maximum, ensure limit */
> + evq_allocated = RTE_MIN(evq_allocated, limits.edl_max_evq_count);
> + rxq_allocated = RTE_MIN(rxq_allocated, limits.edl_max_rxq_count);
> + txq_allocated = RTE_MIN(txq_allocated, limits.edl_max_txq_count);
> +
> +
> + max_queue_cnt = RTE_MIN(rxq_allocated, txq_allocated);
> + /* Subtract management EVQ not used for traffic */
> + max_queue_cnt = RTE_MIN(evq_allocated - 1, max_queue_cnt);
> +
> + SFC_VDPA_ASSERT(max_queue_cnt > 0);
> +
> + sva->max_queue_count = max_queue_cnt;
> +
> + return 0;
> +
> +fail_get_vi_pool:
> + efx_nic_fini(sva->nic);
> +fail_nic_init:
> + sfc_vdpa_log_init(sva, "failed: %s", rte_strerror(rc));
> + return rc;
> +}
> +
> +int
> +sfc_vdpa_hw_init(struct sfc_vdpa_adapter *sva)
> +{
> + efx_bar_region_t mem_ebr;
> + efx_nic_t *enp;
> + int rc;
> +
> + sfc_vdpa_log_init(sva, "entry");
> +
> + sfc_vdpa_log_init(sva, "get family");
> + rc = sfc_efx_family(sva->pdev, &mem_ebr, &sva->family);
> + if (rc != 0)
> + goto fail_family;
> + sfc_vdpa_log_init(sva,
> + "family is %u, membar is %u,"
> + "function control window offset is %#" PRIx64,
> + sva->family, mem_ebr.ebr_index, mem_ebr.ebr_offset);
> +
> + sfc_vdpa_log_init(sva, "init mem bar");
> + rc = sfc_vdpa_mem_bar_init(sva, &mem_ebr);
> + if (rc != 0)
> + goto fail_mem_bar_init;
> +
> + sfc_vdpa_log_init(sva, "create nic");
> + rte_spinlock_init(&sva->nic_lock);
> + rc = efx_nic_create(sva->family, (efsys_identifier_t *)sva,
> + &sva->mem_bar, mem_ebr.ebr_offset,
> + &sva->nic_lock, &enp);
> + if (rc != 0) {
> + sfc_vdpa_err(sva, "nic create failed: %s", rte_strerror(rc));
> + goto fail_nic_create;
> + }
> + sva->nic = enp;
> +
> + sfc_vdpa_log_init(sva, "init mcdi");
> + rc = sfc_vdpa_mcdi_init(sva);
> + if (rc != 0) {
> + sfc_vdpa_err(sva, "mcdi init failed: %s", rte_strerror(rc));
> + goto fail_mcdi_init;
> + }
> +
> + sfc_vdpa_log_init(sva, "probe nic");
> + rc = sfc_vdpa_nic_probe(sva);
> + if (rc != 0)
> + goto fail_nic_probe;
> +
> + sfc_vdpa_log_init(sva, "reset nic");
> + rc = efx_nic_reset(enp);
> + if (rc != 0) {
> + sfc_vdpa_err(sva, "nic reset failed: %s", rte_strerror(rc));
> + goto fail_nic_reset;
> + }
> +
> + sfc_vdpa_log_init(sva, "estimate resource limits");
> + rc = sfc_vdpa_estimate_resource_limits(sva);
> + if (rc != 0)
> + goto fail_estimate_rsrc_limits;
> +
> + sfc_vdpa_log_init(sva, "done");
> +
> + return 0;
> +
> +fail_estimate_rsrc_limits:
> +fail_nic_reset:
> + efx_nic_unprobe(enp);
> +
> +fail_nic_probe:
> + sfc_vdpa_mcdi_fini(sva);
> +
> +fail_mcdi_init:
> + sfc_vdpa_log_init(sva, "destroy nic");
> + sva->nic = NULL;
> + efx_nic_destroy(enp);
> +
> +fail_nic_create:
> + sfc_vdpa_mem_bar_fini(sva);
> +
> +fail_mem_bar_init:
> +fail_family:
> + sfc_vdpa_log_init(sva, "failed: %s", rte_strerror(rc));
> + return rc;
> +}
> +
> +void
> +sfc_vdpa_hw_fini(struct sfc_vdpa_adapter *sva)
> +{
> + efx_nic_t *enp = sva->nic;
> +
> + sfc_vdpa_log_init(sva, "entry");
> +
> + sfc_vdpa_log_init(sva, "unprobe nic");
> + efx_nic_unprobe(enp);
> +
> + sfc_vdpa_log_init(sva, "mcdi fini");
> + sfc_vdpa_mcdi_fini(sva);
> +
> + sfc_vdpa_log_init(sva, "nic fini");
> + efx_nic_fini(enp);
> +
> + sfc_vdpa_log_init(sva, "destroy nic");
> + sva->nic = NULL;
> + efx_nic_destroy(enp);
> +
> + sfc_vdpa_mem_bar_fini(sva);
> +}
> diff --git a/drivers/vdpa/sfc/sfc_vdpa_log.h b/drivers/vdpa/sfc/sfc_vdpa_log.h
> index 858e5ee..4e7a84f 100644
> --- a/drivers/vdpa/sfc/sfc_vdpa_log.h
> +++ b/drivers/vdpa/sfc/sfc_vdpa_log.h
> @@ -21,6 +21,9 @@
> /** Name prefix for the per-device log type used to report basic information */
> #define SFC_VDPA_LOGTYPE_MAIN_STR SFC_VDPA_LOGTYPE_PREFIX "main"
>
> +/** Device MCDI log type name prefix */
> +#define SFC_VDPA_LOGTYPE_MCDI_STR SFC_VDPA_LOGTYPE_PREFIX "mcdi"
> +
> #define SFC_VDPA_LOG_PREFIX_MAX 32
>
> /* Log PMD message, automatically add prefix and \n */
> diff --git a/drivers/vdpa/sfc/sfc_vdpa_mcdi.c b/drivers/vdpa/sfc/sfc_vdpa_mcdi.c
> new file mode 100644
> index 0000000..961d2d3
> --- /dev/null
> +++ b/drivers/vdpa/sfc/sfc_vdpa_mcdi.c
> @@ -0,0 +1,74 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + *
> + * Copyright(c) 2020-2021 Xilinx, Inc.
> + */
> +
> +#include "sfc_efx_mcdi.h"
> +
> +#include "sfc_vdpa.h"
> +#include "sfc_vdpa_debug.h"
> +#include "sfc_vdpa_log.h"
> +
> +static sfc_efx_mcdi_dma_alloc_cb sfc_vdpa_mcdi_dma_alloc;
> +static int
> +sfc_vdpa_mcdi_dma_alloc(void *cookie, const char *name, size_t len,
> + efsys_mem_t *esmp)
> +{
> + struct sfc_vdpa_adapter *sva = cookie;
> +
> + return sfc_vdpa_dma_alloc(sva, name, len, esmp);
> +}
> +
> +static sfc_efx_mcdi_dma_free_cb sfc_vdpa_mcdi_dma_free;
> +static void
> +sfc_vdpa_mcdi_dma_free(void *cookie, efsys_mem_t *esmp)
> +{
> + struct sfc_vdpa_adapter *sva = cookie;
> +
> + sfc_vdpa_dma_free(sva, esmp);
> +}
> +
> +static sfc_efx_mcdi_sched_restart_cb sfc_vdpa_mcdi_sched_restart;
> +static void
> +sfc_vdpa_mcdi_sched_restart(void *cookie)
> +{
> + RTE_SET_USED(cookie);
> +}
> +
> +static sfc_efx_mcdi_mgmt_evq_poll_cb sfc_vdpa_mcdi_mgmt_evq_poll;
> +static void
> +sfc_vdpa_mcdi_mgmt_evq_poll(void *cookie)
> +{
> + RTE_SET_USED(cookie);
> +}
> +
> +static const struct sfc_efx_mcdi_ops sfc_vdpa_mcdi_ops = {
> + .dma_alloc = sfc_vdpa_mcdi_dma_alloc,
> + .dma_free = sfc_vdpa_mcdi_dma_free,
> + .sched_restart = sfc_vdpa_mcdi_sched_restart,
> + .mgmt_evq_poll = sfc_vdpa_mcdi_mgmt_evq_poll,
> +
> +};
> +
> +int
> +sfc_vdpa_mcdi_init(struct sfc_vdpa_adapter *sva)
> +{
> + uint32_t logtype;
> +
> + sfc_vdpa_log_init(sva, "entry");
> +
> + logtype = sfc_vdpa_register_logtype(&(sva->pdev->addr),
> + SFC_VDPA_LOGTYPE_MCDI_STR,
> + RTE_LOG_NOTICE);
> +
> + return sfc_efx_mcdi_init(&sva->mcdi, logtype,
> + sva->log_prefix, sva->nic,
> + &sfc_vdpa_mcdi_ops, sva);
> +}
> +
> +void
> +sfc_vdpa_mcdi_fini(struct sfc_vdpa_adapter *sva)
> +{
> + sfc_vdpa_log_init(sva, "entry");
> + sfc_efx_mcdi_fini(&sva->mcdi);
> +}
> diff --git a/drivers/vdpa/sfc/sfc_vdpa_ops.c b/drivers/vdpa/sfc/sfc_vdpa_ops.c
> new file mode 100644
> index 0000000..71696be
> --- /dev/null
> +++ b/drivers/vdpa/sfc/sfc_vdpa_ops.c
> @@ -0,0 +1,129 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + *
> + * Copyright(c) 2020-2021 Xilinx, Inc.
> + */
> +
> +#include <rte_malloc.h>
> +#include <rte_vdpa.h>
> +#include <rte_vdpa_dev.h>
> +#include <rte_vhost.h>
> +
> +#include "sfc_vdpa_ops.h"
> +#include "sfc_vdpa.h"
> +
> +/* Dummy functions for mandatory vDPA ops to pass vDPA device registration.
> + * In subsequent patches these ops would be implemented.
> + */
> +static int
> +sfc_vdpa_get_queue_num(struct rte_vdpa_device *vdpa_dev, uint32_t *queue_num)
> +{
> + RTE_SET_USED(vdpa_dev);
> + RTE_SET_USED(queue_num);
> +
> + return -1;
> +}
> +
> +static int
> +sfc_vdpa_get_features(struct rte_vdpa_device *vdpa_dev, uint64_t *features)
> +{
> + RTE_SET_USED(vdpa_dev);
> + RTE_SET_USED(features);
> +
> + return -1;
> +}
> +
> +static int
> +sfc_vdpa_get_protocol_features(struct rte_vdpa_device *vdpa_dev,
> + uint64_t *features)
> +{
> + RTE_SET_USED(vdpa_dev);
> + RTE_SET_USED(features);
> +
> + return -1;
> +}
> +
> +static int
> +sfc_vdpa_dev_config(int vid)
> +{
> + RTE_SET_USED(vid);
> +
> + return -1;
> +}
> +
> +static int
> +sfc_vdpa_dev_close(int vid)
> +{
> + RTE_SET_USED(vid);
> +
> + return -1;
> +}
> +
> +static int
> +sfc_vdpa_set_vring_state(int vid, int vring, int state)
> +{
> + RTE_SET_USED(vid);
> + RTE_SET_USED(vring);
> + RTE_SET_USED(state);
> +
> + return -1;
> +}
> +
> +static int
> +sfc_vdpa_set_features(int vid)
> +{
> + RTE_SET_USED(vid);
> +
> + return -1;
> +}
> +
> +static struct rte_vdpa_dev_ops sfc_vdpa_ops = {
> + .get_queue_num = sfc_vdpa_get_queue_num,
> + .get_features = sfc_vdpa_get_features,
> + .get_protocol_features = sfc_vdpa_get_protocol_features,
> + .dev_conf = sfc_vdpa_dev_config,
> + .dev_close = sfc_vdpa_dev_close,
> + .set_vring_state = sfc_vdpa_set_vring_state,
> + .set_features = sfc_vdpa_set_features,
> +};
> +
> +struct sfc_vdpa_ops_data *
> +sfc_vdpa_device_init(void *dev_handle, enum sfc_vdpa_context context)
> +{
> + struct sfc_vdpa_ops_data *ops_data;
> + struct rte_pci_device *pci_dev;
> +
> + /* Create vDPA ops context */
> + ops_data = rte_zmalloc("vdpa", sizeof(struct sfc_vdpa_ops_data), 0);
> + if (ops_data == NULL)
> + return NULL;
> +
> + ops_data->vdpa_context = context;
> + ops_data->dev_handle = dev_handle;
> +
> + pci_dev = sfc_vdpa_adapter_by_dev_handle(dev_handle)->pdev;
> +
> + /* Register vDPA Device */
> + sfc_vdpa_log_init(dev_handle, "register vDPA device");
> + ops_data->vdpa_dev =
> + rte_vdpa_register_device(&pci_dev->device, &sfc_vdpa_ops);
> + if (ops_data->vdpa_dev == NULL) {
> + sfc_vdpa_err(dev_handle, "vDPA device registration failed");
> + goto fail_register_device;
> + }
> +
> + ops_data->state = SFC_VDPA_STATE_INITIALIZED;
> +
> + return ops_data;
> +
> +fail_register_device:
> + rte_free(ops_data);
> + return NULL;
> +}
> +
> +void
> +sfc_vdpa_device_fini(struct sfc_vdpa_ops_data *ops_data)
> +{
> + rte_vdpa_unregister_device(ops_data->vdpa_dev);
> +
> + rte_free(ops_data);
> +}
> diff --git a/drivers/vdpa/sfc/sfc_vdpa_ops.h b/drivers/vdpa/sfc/sfc_vdpa_ops.h
> new file mode 100644
> index 0000000..817b302
> --- /dev/null
> +++ b/drivers/vdpa/sfc/sfc_vdpa_ops.h
> @@ -0,0 +1,36 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + *
> + * Copyright(c) 2020-2021 Xilinx, Inc.
> + */
> +
> +#ifndef _SFC_VDPA_OPS_H
> +#define _SFC_VDPA_OPS_H
> +
> +#include <rte_vdpa.h>
> +
> +#define SFC_VDPA_MAX_QUEUE_PAIRS 1
> +
> +enum sfc_vdpa_context {
> + SFC_VDPA_AS_PF = 0,
0 is the default.
> + SFC_VDPA_AS_VF
> +};
> +
> +enum sfc_vdpa_state {
> + SFC_VDPA_STATE_UNINITIALIZED = 0,
Same here.
> + SFC_VDPA_STATE_INITIALIZED,
> + SFC_VDPA_STATE_NSTATES
> +};
> +
> +struct sfc_vdpa_ops_data {
> + void *dev_handle;
> + struct rte_vdpa_device *vdpa_dev;
> + enum sfc_vdpa_context vdpa_context;
> + enum sfc_vdpa_state state;
> +};
> +
> +struct sfc_vdpa_ops_data *
> +sfc_vdpa_device_init(void *adapter, enum sfc_vdpa_context context);
> +void
> +sfc_vdpa_device_fini(struct sfc_vdpa_ops_data *ops_data);
> +
> +#endif /* _SFC_VDPA_OPS_H */
>
More information about the dev
mailing list