[dpdk-dev] [PATCH v1 1/1] vfio: add page-by-page mapping API

Burakov, Anatoly anatoly.burakov at intel.com
Wed Sep 29 12:18:49 CEST 2021


On 10-Sep-21 12:27 PM, Anatoly Burakov wrote:
> Currently, there is no way to map memory for DMA in a way that allows
> unmapping it partially later, because some IOMMU's do not support
> partial unmapping. There is a workaround of mapping all of these
> segments separately, but this is inconvenient and silly, so this
> commit adds a proper API that does it.
> 
> This commit relies on earlier infrastructure that was built out to
> support "chunking", as the concept of "chunks" is essentially the same
> as page size.
> 
> Signed-off-by: Anatoly Burakov <anatoly.burakov at intel.com>
> ---
>   lib/eal/freebsd/eal.c      | 10 ++++
>   lib/eal/include/rte_vfio.h | 33 ++++++++++++++
>   lib/eal/linux/eal_vfio.c   | 93 +++++++++++++++++++++++++++++++-------
>   lib/eal/version.map        |  3 ++
>   lib/eal/windows/eal.c      | 10 ++++
>   5 files changed, 133 insertions(+), 16 deletions(-)
> 
> diff --git a/lib/eal/freebsd/eal.c b/lib/eal/freebsd/eal.c
> index 6cee5ae369..78e18f9765 100644
> --- a/lib/eal/freebsd/eal.c
> +++ b/lib/eal/freebsd/eal.c
> @@ -1085,6 +1085,16 @@ rte_vfio_container_dma_map(__rte_unused int container_fd,
>   	return -1;
>   }
>   
> +int
> +rte_vfio_container_dma_map_paged(__rte_unused int container_fd,
> +		__rte_unused uint64_t vaddr,
> +		__rte_unused uint64_t iova,
> +		__rte_unused uint64_t len,
> +		__rte_unused uint64_t pagesz)
> +{
> +	return -1;
> +}
> +
>   int
>   rte_vfio_container_dma_unmap(__rte_unused int container_fd,
>   			__rte_unused uint64_t vaddr,
> diff --git a/lib/eal/include/rte_vfio.h b/lib/eal/include/rte_vfio.h
> index 2d90b36480..6afae2ccce 100644
> --- a/lib/eal/include/rte_vfio.h
> +++ b/lib/eal/include/rte_vfio.h
> @@ -17,6 +17,8 @@ extern "C" {
>   #include <stdbool.h>
>   #include <stdint.h>
>   
> +#include <rte_compat.h>
> +
>   /*
>    * determine if VFIO is present on the system
>    */
> @@ -331,6 +333,37 @@ int
>   rte_vfio_container_dma_map(int container_fd, uint64_t vaddr,
>   		uint64_t iova, uint64_t len);
>   
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
> + *
> + * Perform DMA mapping for devices in a container, mapping memory page-by-page.
> + *
> + * @param container_fd
> + *   the specified container fd. Use RTE_VFIO_DEFAULT_CONTAINER_FD to
> + *   use the default container.
> + *
> + * @param vaddr
> + *   Starting virtual address of memory to be mapped.
> + *
> + * @param iova
> + *   Starting IOVA address of memory to be mapped.
> + *
> + * @param len
> + *   Length of memory segment being mapped.
> + *
> + * @param pagesz
> + *   Page size of the underlying memory.
> + *
> + * @return
> + *    0 if successful
> + *   <0 if failed
> + */
> +__rte_experimental
> +int
> +rte_vfio_container_dma_map_paged(int container_fd, uint64_t vaddr,
> +		uint64_t iova, uint64_t len, uint64_t pagesz);
> +
>   /**
>    * Perform DMA unmapping for devices in a container.
>    *
> diff --git a/lib/eal/linux/eal_vfio.c b/lib/eal/linux/eal_vfio.c
> index 657c89ca58..c791730251 100644
> --- a/lib/eal/linux/eal_vfio.c
> +++ b/lib/eal/linux/eal_vfio.c
> @@ -1872,11 +1872,12 @@ vfio_dma_mem_map(struct vfio_config *vfio_cfg, uint64_t vaddr, uint64_t iova,
>   
>   static int
>   container_dma_map(struct vfio_config *vfio_cfg, uint64_t vaddr, uint64_t iova,
> -		uint64_t len)
> +		uint64_t len, uint64_t pagesz)
>   {
>   	struct user_mem_map *new_map;
>   	struct user_mem_maps *user_mem_maps;
>   	bool has_partial_unmap;
> +	uint64_t chunk_size;
>   	int ret = 0;
>   
>   	user_mem_maps = &vfio_cfg->mem_maps;
> @@ -1887,19 +1888,37 @@ container_dma_map(struct vfio_config *vfio_cfg, uint64_t vaddr, uint64_t iova,
>   		ret = -1;
>   		goto out;
>   	}
> -	/* map the entry */
> -	if (vfio_dma_mem_map(vfio_cfg, vaddr, iova, len, 1)) {
> -		/* technically, this will fail if there are currently no devices
> -		 * plugged in, even if a device were added later, this mapping
> -		 * might have succeeded. however, since we cannot verify if this
> -		 * is a valid mapping without having a device attached, consider
> -		 * this to be unsupported, because we can't just store any old
> -		 * mapping and pollute list of active mappings willy-nilly.
> -		 */
> -		RTE_LOG(ERR, EAL, "Couldn't map new region for DMA\n");
> -		ret = -1;
> -		goto out;
> +
> +	/* technically, mapping will fail if there are currently no devices
> +	 * plugged in, even if a device were added later, this mapping might
> +	 * have succeeded. however, since we cannot verify if this is a valid
> +	 * mapping without having a device attached, consider this to be
> +	 * unsupported, because we can't just store any old mapping and pollute
> +	 * list of active mappings willy-nilly.
> +	 */
> +
> +	/* if page size was not specified, map the entire segment in one go */
> +	if (pagesz == 0) {
> +		if (vfio_dma_mem_map(vfio_cfg, vaddr, iova, len, 1)) {
> +			RTE_LOG(ERR, EAL, "Couldn't map new region for DMA\n");
> +			ret = -1;
> +			goto out;
> +		}
> +	} else {
> +		/* otherwise, do mappings page-by-page */
> +		uint64_t offset;
> +
> +		for (offset = 0; offset < len; offset += pagesz) {
> +			uint64_t va = vaddr + offset;
> +			uint64_t io = iova + offset;
> +			if (vfio_dma_mem_map(vfio_cfg, va, io, pagesz, 1)) {
> +				RTE_LOG(ERR, EAL, "Couldn't map new region for DMA\n");
> +				ret = -1;
> +				goto out;
> +			}
> +		}
>   	}
> +
>   	/* do we have partial unmap support? */
>   	has_partial_unmap = vfio_cfg->vfio_iommu_type->partial_unmap;
>   
> @@ -1908,8 +1927,18 @@ container_dma_map(struct vfio_config *vfio_cfg, uint64_t vaddr, uint64_t iova,
>   	new_map->addr = vaddr;
>   	new_map->iova = iova;
>   	new_map->len = len;
> -	/* for IOMMU types supporting partial unmap, we don't need chunking */
> -	new_map->chunk = has_partial_unmap ? 0 : len;
> +
> +	/*
> +	 * Chunking essentially serves largely the same purpose as page sizes,
> +	 * so for the purposes of this calculation, we treat them as the same.
> +	 * The reason we have page sizes is because we want to map things in a
> +	 * way that allows us to partially unmap later. Therefore, when IOMMU
> +	 * supports partial unmap, page size is irrelevant and can be ignored.
> +	 * For IOMMU that don't support partial unmap, page size is equivalent
> +	 * to chunk size.
> +	 */
> +	chunk_size = pagesz == 0 ? len : pagesz;
> +	new_map->chunk = has_partial_unmap ? 0 : chunk_size;
>   
>   	compact_user_maps(user_mem_maps);
>   out:
> @@ -2179,7 +2208,29 @@ rte_vfio_container_dma_map(int container_fd, uint64_t vaddr, uint64_t iova,
>   		return -1;
>   	}
>   
> -	return container_dma_map(vfio_cfg, vaddr, iova, len);
> +	/* not having page size means we map entire segment */
> +	return container_dma_map(vfio_cfg, vaddr, iova, len, 0);
> +}
> +
> +int
> +rte_vfio_container_dma_map_paged(int container_fd, uint64_t vaddr,
> +		uint64_t iova, uint64_t len, uint64_t pagesz)
> +{
> +	struct vfio_config *vfio_cfg;
> +
> +	if (len == 0 || pagesz == 0 || !rte_is_power_of_2(pagesz) ||
> +			(len % pagesz) != 0) {

This should also check if VA/IOVA is page-aligned. Will fix in v2.

> +		rte_errno = EINVAL;
> +		return -1;
> +	}
> +
> +	vfio_cfg = get_vfio_cfg_by_container_fd(container_fd);
> +	if (vfio_cfg == NULL) {
> +		RTE_LOG(ERR, EAL, "Invalid VFIO container fd\n");
> +		return -1;
> +	}
> +
> +	return container_dma_map(vfio_cfg, vaddr, iova, len, pagesz);
>   }
>   
>   int
> @@ -2299,6 +2350,16 @@ rte_vfio_container_dma_map(__rte_unused int container_fd,
>   	return -1;
>   }
>   
> +int
> +rte_vfio_container_dma_map_paged(__rte_unused int container_fd,
> +		__rte_unused uint64_t vaddr,
> +		__rte_unused uint64_t iova,
> +		__rte_unused uint64_t len,
> +		__rte_unused uint64_t pagesz)
> +{
> +	return -1;
> +}
> +
>   int
>   rte_vfio_container_dma_unmap(__rte_unused int container_fd,
>   		__rte_unused uint64_t vaddr,
> diff --git a/lib/eal/version.map b/lib/eal/version.map
> index beeb986adc..eaa6b0bedf 100644
> --- a/lib/eal/version.map
> +++ b/lib/eal/version.map
> @@ -426,6 +426,9 @@ EXPERIMENTAL {
>   
>   	# added in 21.08
>   	rte_power_monitor_multi; # WINDOWS_NO_EXPORT
> +
> +	# added in 21.11
> +	rte_vfio_container_dma_map_paged;
>   };
>   
>   INTERNAL {
> diff --git a/lib/eal/windows/eal.c b/lib/eal/windows/eal.c
> index 3d8c520412..fcd6bc1894 100644
> --- a/lib/eal/windows/eal.c
> +++ b/lib/eal/windows/eal.c
> @@ -459,6 +459,16 @@ rte_vfio_container_dma_map(__rte_unused int container_fd,
>   	return -1;
>   }
>   
> +int
> +rte_vfio_container_dma_map_paged(__rte_unused int container_fd,
> +		__rte_unused uint64_t vaddr,
> +		__rte_unused uint64_t iova,
> +		__rte_unused uint64_t len,
> +		__rte_unused uint64_t pagesz)
> +{
> +	return -1;
> +}
> +
>   int
>   rte_vfio_container_dma_unmap(__rte_unused int container_fd,
>   			__rte_unused uint64_t vaddr,
> 


-- 
Thanks,
Anatoly


More information about the dev mailing list