[PATCH] net/ixgbe: Treat 1G Cu SFPs as 1G SX on the X550 devices

[Thomas Monjalon]

14/04/2022 14:13, Wang, Haiyue:
> From: Thomas Monjalon <thomas at monjalon.net>
> > 14/04/2022 03:31, Wang, Haiyue:
> > > From: jeffd at silicom-usa.com <jeffd at silicom-usa.com>
> > > > From: Stephen Douthit <stephend at silicom-usa.com>
> > > >
> > > > 1G Cu SFPs are not officially supported on the X552/X553 family of devices
> > > > but treat them as 1G SX modules since they usually work.  Print a warning
> > > > though since support isn't validated, similar to what already happens for
> > > > other unofficially supported SFPs enabled via the allow_unsupported_sfps
> > > > parameter inherited from the mainline Linux driver.
> > > >
> > > > Signed-off-by: Stephen Douthit <stephend at silicom-usa.com>
> > > > Signed-off-by: Jeff Daly <jeffd at silicom-usa.com>
> > > > ---
> > > >  drivers/net/ixgbe/base/ixgbe_x550.c | 14 +++++++++++++-
> > > >  1 file changed, 13 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
> > > > index 8810d1658e..8d1bc6c80d 100644
> > > > --- a/drivers/net/ixgbe/base/ixgbe_x550.c
> > > > +++ b/drivers/net/ixgbe/base/ixgbe_x550.c
> > > > @@ -1538,9 +1538,21 @@ STATIC s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool
> > *linear)
> > >
> > > NACK.
> > >
> > > As for 1G Cu SFP treating it as 1G SX, some 1G-Base-T SFP modules require the use
> > > of RX_ILOS and some Intel Ethernet products don't support that.
> > 
> > So what is the solution?
> > 
> > > And the DPDK keeps the same design with kernel.
> > 
> > It should not be a justification for limiting DPDK features.
> 
> Um, this is upstream version driver to keep the same behavior.
> 
> There are also some kind of custom release ...

I don't understand.
Upstream DPDK (and Linux) must support a maximum of hardware and setup.
Why rejecting adding such compatibility?