[PATCH 5/6] net/hns3: fix operating queue when TCAM table is invalid

[Min Hu (Connor)]

From: Huisong Li <lihuisong at huawei.com>

Reset queues will query the TCAM table. The table is cleared after global
or imp reset. Currently, PF driver first resets Rx/Tx queues and then
restore the table during the reset recovery process, which will fail to
query the table and trigger a RAS error.

Fixes: fa29fe45a7b4 ("net/hns3: support queue start and stop")
Cc: stable at dpdk.org

Signed-off-by: Huisong Li <lihuisong at huawei.com>
Signed-off-by: Min Hu (Connor) <humin29 at huawei.com>
---
 drivers/net/hns3/hns3_ethdev.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 57f1572340..2641b6f79b 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -4378,6 +4378,10 @@ hns3_init_hardware(struct hns3_adapter *hns)
 	struct hns3_hw *hw = &hns->hw;
 	int ret;
 
+	/*
+	 * All queue-related HW operations must be performed after the TCAM
+	 * table is configured.
+	 */
 	ret = hns3_map_tqp(hw);
 	if (ret) {
 		PMD_INIT_LOG(ERR, "Failed to map tqp: %d", ret);
@@ -5547,15 +5551,15 @@ hns3_reinit_dev(struct hns3_adapter *hns)
 		return ret;
 	}
 
-	ret = hns3_reset_all_tqps(hns);
+	ret = hns3_init_hardware(hns);
 	if (ret) {
-		hns3_err(hw, "Failed to reset all queues: %d", ret);
+		hns3_err(hw, "Failed to init hardware: %d", ret);
 		return ret;
 	}
 
-	ret = hns3_init_hardware(hns);
+	ret = hns3_reset_all_tqps(hns);
 	if (ret) {
-		hns3_err(hw, "Failed to init hardware: %d", ret);
+		hns3_err(hw, "Failed to reset all queues: %d", ret);
 		return ret;
 	}
 
-- 
2.33.0