[PATCH v4 4/7] drivers/baseband: update PMDs to expose queue per operation

[Tom Rix]

On 7/5/22 5:23 PM, Nicolas Chautru wrote:
> Add support in existing bbdev PMDs for the explicit number of queue
> and priority for each operation type configured on the device.
>
> Signed-off-by: Nicolas Chautru <nicolas.chautru at intel.com>
> ---
>   drivers/baseband/acc100/rte_acc100_pmd.c           | 29 +++++++++++++---------
>   drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c |  8 ++++++
>   drivers/baseband/fpga_lte_fec/fpga_lte_fec.c       |  8 ++++++
>   drivers/baseband/la12xx/bbdev_la12xx.c             |  7 ++++++
>   drivers/baseband/turbo_sw/bbdev_turbo_software.c   | 11 ++++++++
>   5 files changed, 51 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c b/drivers/baseband/acc100/rte_acc100_pmd.c
> index 17ba798..d568d0d 100644
> --- a/drivers/baseband/acc100/rte_acc100_pmd.c
> +++ b/drivers/baseband/acc100/rte_acc100_pmd.c
> @@ -966,6 +966,7 @@
>   		struct rte_bbdev_driver_info *dev_info)
>   {
>   	struct acc100_device *d = dev->data->dev_private;
> +	int i;
>   
>   	static const struct rte_bbdev_op_cap bbdev_capabilities[] = {
>   		{
> @@ -1062,19 +1063,23 @@
>   	fetch_acc100_config(dev);
>   	dev_info->device_status = RTE_BBDEV_DEV_NOT_SUPPORTED;
>   
> -	/* This isn't ideal because it reports the maximum number of queues but
> -	 * does not provide info on how many can be uplink/downlink or different
> -	 * priorities
> -	 */
> -	dev_info->max_num_queues =
> -			d->acc100_conf.q_dl_5g.num_aqs_per_groups *
> -			d->acc100_conf.q_dl_5g.num_qgroups +
> -			d->acc100_conf.q_ul_5g.num_aqs_per_groups *
> -			d->acc100_conf.q_ul_5g.num_qgroups +
> -			d->acc100_conf.q_dl_4g.num_aqs_per_groups *
> -			d->acc100_conf.q_dl_4g.num_qgroups +
> -			d->acc100_conf.q_ul_4g.num_aqs_per_groups *
> +	/* Expose number of queues */
> +	dev_info->num_queues[RTE_BBDEV_OP_NONE] = 0;
> +	dev_info->num_queues[RTE_BBDEV_OP_TURBO_DEC] = d->acc100_conf.q_ul_4g.num_aqs_per_groups *
>   			d->acc100_conf.q_ul_4g.num_qgroups;
> +	dev_info->num_queues[RTE_BBDEV_OP_TURBO_ENC] = d->acc100_conf.q_dl_4g.num_aqs_per_groups *
> +			d->acc100_conf.q_dl_4g.num_qgroups;
> +	dev_info->num_queues[RTE_BBDEV_OP_LDPC_DEC] = d->acc100_conf.q_ul_5g.num_aqs_per_groups *
> +			d->acc100_conf.q_ul_5g.num_qgroups;
> +	dev_info->num_queues[RTE_BBDEV_OP_LDPC_ENC] = d->acc100_conf.q_dl_5g.num_aqs_per_groups *
> +			d->acc100_conf.q_dl_5g.num_qgroups;
> +	dev_info->queue_priority[RTE_BBDEV_OP_TURBO_DEC] = d->acc100_conf.q_ul_4g.num_qgroups;
> +	dev_info->queue_priority[RTE_BBDEV_OP_TURBO_ENC] = d->acc100_conf.q_dl_4g.num_qgroups;
> +	dev_info->queue_priority[RTE_BBDEV_OP_LDPC_DEC] = d->acc100_conf.q_ul_5g.num_qgroups;
> +	dev_info->queue_priority[RTE_BBDEV_OP_LDPC_ENC] = d->acc100_conf.q_dl_5g.num_qgroups;
> +	dev_info->max_num_queues = 0;
> +	for (i = RTE_BBDEV_OP_TURBO_DEC; i < RTE_BBDEV_OP_LDPC_ENC; i++)

should this be i <=  ?


> +		dev_info->max_num_queues += dev_info->num_queues[i];
>   	dev_info->queue_size_lim = ACC100_MAX_QUEUE_DEPTH;
>   	dev_info->hardware_accelerated = true;
>   	dev_info->max_dl_queue_priority =
> diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
> index 57b12af..b4982af 100644
> --- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
> +++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
> @@ -379,6 +379,14 @@
>   		if (hw_q_id != FPGA_INVALID_HW_QUEUE_ID)
>   			dev_info->max_num_queues++;
>   	}
> +	/* Expose number of queue per operation type */
> +	dev_info->num_queues[RTE_BBDEV_OP_NONE] = 0;
> +	dev_info->num_queues[RTE_BBDEV_OP_TURBO_DEC] = 0;
> +	dev_info->num_queues[RTE_BBDEV_OP_TURBO_ENC] = 0;
> +	dev_info->num_queues[RTE_BBDEV_OP_LDPC_DEC] = dev_info->max_num_queues / 2;
> +	dev_info->num_queues[RTE_BBDEV_OP_LDPC_ENC] = dev_info->max_num_queues / 2;
> +	dev_info->queue_priority[RTE_BBDEV_OP_LDPC_DEC] = 1;
> +	dev_info->queue_priority[RTE_BBDEV_OP_LDPC_ENC] = 1;
>   }
>   
>   /**
> diff --git a/drivers/baseband/fpga_lte_fec/fpga_lte_fec.c b/drivers/baseband/fpga_lte_fec/fpga_lte_fec.c
> index 2a330c4..dc7f479 100644
> --- a/drivers/baseband/fpga_lte_fec/fpga_lte_fec.c
> +++ b/drivers/baseband/fpga_lte_fec/fpga_lte_fec.c
> @@ -655,6 +655,14 @@ struct __rte_cache_aligned fpga_queue {
>   		if (hw_q_id != FPGA_INVALID_HW_QUEUE_ID)
>   			dev_info->max_num_queues++;
>   	}
> +	/* Expose number of queue per operation type */
> +	dev_info->num_queues[RTE_BBDEV_OP_NONE] = 0;
> +	dev_info->num_queues[RTE_BBDEV_OP_TURBO_DEC] = dev_info->max_num_queues / 2;
> +	dev_info->num_queues[RTE_BBDEV_OP_TURBO_ENC] = dev_info->max_num_queues / 2;
> +	dev_info->num_queues[RTE_BBDEV_OP_LDPC_DEC] = 0;
> +	dev_info->num_queues[RTE_BBDEV_OP_LDPC_ENC] = 0;
> +	dev_info->queue_priority[RTE_BBDEV_OP_TURBO_DEC] = 1;
> +	dev_info->queue_priority[RTE_BBDEV_OP_TURBO_ENC] = 1;
>   }
>   
>   /**
> diff --git a/drivers/baseband/la12xx/bbdev_la12xx.c b/drivers/baseband/la12xx/bbdev_la12xx.c
> index c1f88c6..e99ea9a 100644
> --- a/drivers/baseband/la12xx/bbdev_la12xx.c
> +++ b/drivers/baseband/la12xx/bbdev_la12xx.c
> @@ -102,6 +102,13 @@ struct bbdev_la12xx_params {
>   	dev_info->min_alignment = 64;
>   	dev_info->device_status = RTE_BBDEV_DEV_NOT_SUPPORTED;
>   
> +	dev_info->num_queues[RTE_BBDEV_OP_NONE] = 0;
> +	dev_info->num_queues[RTE_BBDEV_OP_TURBO_DEC] = 0;
> +	dev_info->num_queues[RTE_BBDEV_OP_TURBO_ENC] = 0;
> +	dev_info->num_queues[RTE_BBDEV_OP_LDPC_DEC] = LA12XX_MAX_QUEUES / 2;
> +	dev_info->num_queues[RTE_BBDEV_OP_LDPC_ENC] = LA12XX_MAX_QUEUES / 2;
> +	dev_info->queue_priority[RTE_BBDEV_OP_LDPC_DEC] = 1;
> +	dev_info->queue_priority[RTE_BBDEV_OP_LDPC_ENC] = 1;
>   	rte_bbdev_log_debug("got device info from %u", dev->data->dev_id);
>   }
>   
> diff --git a/drivers/baseband/turbo_sw/bbdev_turbo_software.c b/drivers/baseband/turbo_sw/bbdev_turbo_software.c
> index dbc5524..647e706 100644
> --- a/drivers/baseband/turbo_sw/bbdev_turbo_software.c
> +++ b/drivers/baseband/turbo_sw/bbdev_turbo_software.c
> @@ -256,6 +256,17 @@ struct turbo_sw_queue {
>   	dev_info->data_endianness = RTE_LITTLE_ENDIAN;
>   	dev_info->device_status = RTE_BBDEV_DEV_NOT_SUPPORTED;
>   
> +	const struct rte_bbdev_op_cap *op_cap = bbdev_capabilities;

Should this be done through dev instead of assigning directly ?

Tom

> +	int num_op_type = 0;
> +	for (; op_cap->type != RTE_BBDEV_OP_NONE; ++op_cap)
> +		num_op_type++;
> +	op_cap = bbdev_capabilities;
> +	if (num_op_type > 0) {
> +		int num_queue_per_type = dev_info->max_num_queues / num_op_type;
> +		for (; op_cap->type != RTE_BBDEV_OP_NONE; ++op_cap)
> +			dev_info->num_queues[op_cap->type] = num_queue_per_type;
> +	}
> +
>   	rte_bbdev_log_debug("got device info from %u\n", dev->data->dev_id);
>   }
>