[PATCH v9 1/4] ethdev: introduce protocol header API

[wenxuanx.wu at intel.com]

From: Wenxuan Wu <wenxuanx.wu at intel.com>

This patch added new ethdev API to retrieve supported protocol header mask
of a PMD, which helps to configure protocol header based buffer split.

Signed-off-by: Wenxuan Wu <wenxuanx.wu at intel.com>
---
 doc/guides/rel_notes/release_22_07.rst |  2 ++
 lib/ethdev/ethdev_driver.h             | 18 +++++++++++++++
 lib/ethdev/rte_ethdev.c                | 31 +++++++++++++++++---------
 lib/ethdev/rte_ethdev.h                | 22 ++++++++++++++++++
 lib/ethdev/version.map                 |  3 +++
 5 files changed, 65 insertions(+), 11 deletions(-)

diff --git a/doc/guides/rel_notes/release_22_07.rst b/doc/guides/rel_notes/release_22_07.rst
index 42a5f2d990..a9b8ed3494 100644
--- a/doc/guides/rel_notes/release_22_07.rst
+++ b/doc/guides/rel_notes/release_22_07.rst
@@ -54,7 +54,9 @@ New Features
      This section is a comment. Do not overwrite or remove it.
      Also, make sure to start the actual text at the margin.
      =======================================================
+* **Added new ethdev API for PMD to get buffer split supported protocol types.**
 
+  Added ``rte_eth_supported_hdrs_get()``, to get supported header protocol mask of a PMD to split.
 
 Removed Items
 -------------
diff --git a/lib/ethdev/ethdev_driver.h b/lib/ethdev/ethdev_driver.h
index 69d9dc21d8..7b19842582 100644
--- a/lib/ethdev/ethdev_driver.h
+++ b/lib/ethdev/ethdev_driver.h
@@ -1054,6 +1054,21 @@ typedef int (*eth_ip_reassembly_conf_get_t)(struct rte_eth_dev *dev,
 typedef int (*eth_ip_reassembly_conf_set_t)(struct rte_eth_dev *dev,
 		const struct rte_eth_ip_reassembly_params *conf);
 
+/**
+ * @internal
+ * Get supported protocol flags of a PMD to split.
+ *
+ * @param dev
+ *   ethdev handle of port.
+ *
+ * @param[out]  ptype mask
+ *   supported ptype mask of a PMD.
+ *
+ * @return
+ *   Negative errno value on error, zero on success.
+ */
+typedef int (*eth_buffer_split_hdr_ptype_get_t)(struct rte_eth_dev *dev, uint32_t *ptype);
+
 /**
  * @internal
  * Dump private info from device to a file.
@@ -1281,6 +1296,9 @@ struct eth_dev_ops {
 	/** Set IP reassembly configuration */
 	eth_ip_reassembly_conf_set_t ip_reassembly_conf_set;
 
+	/** Get supported ptypes to split */
+	eth_buffer_split_hdr_ptype_get_t hdrs_supported_ptypes_get;
+
 	/** Dump private info from device */
 	eth_dev_priv_dump_t eth_dev_priv_dump;
 };
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index 29a3d80466..e1f2a0ffe3 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -1636,9 +1636,10 @@ rte_eth_dev_is_removed(uint16_t port_id)
 }
 
 static int
-rte_eth_rx_queue_check_split(const struct rte_eth_rxseg_split *rx_seg,
-			     uint16_t n_seg, uint32_t *mbp_buf_size,
-			     const struct rte_eth_dev_info *dev_info)
+rte_eth_rx_queue_check_split(uint16_t port_id,
+				const struct rte_eth_rxseg_split *rx_seg,
+				int16_t n_seg, uint32_t *mbp_buf_size,
+			    const struct rte_eth_dev_info *dev_info)
 {
 	const struct rte_eth_rxseg_capa *seg_capa = &dev_info->rx_seg_capa;
 	struct rte_mempool *mp_first;
@@ -1694,13 +1695,7 @@ rte_eth_rx_queue_check_split(const struct rte_eth_rxseg_split *rx_seg,
 		}
 		offset += seg_idx != 0 ? 0 : RTE_PKTMBUF_HEADROOM;
 		*mbp_buf_size = rte_pktmbuf_data_room_size(mpl);
-		length = length != 0 ? length : *mbp_buf_size;
-		if (*mbp_buf_size < length + offset) {
-			RTE_ETHDEV_LOG(ERR,
-				       "%s mbuf_data_room_size %u < %u (segment length=%u + segment offset=%u)\n",
-				       mpl->name, *mbp_buf_size,
-				       length + offset, length, offset);
-			return -EINVAL;
+
 		}
 	}
 	return 0;
@@ -1779,7 +1774,7 @@ rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
 		n_seg = rx_conf->rx_nseg;
 
 		if (rx_conf->offloads & RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT) {
-			ret = rte_eth_rx_queue_check_split(rx_seg, n_seg,
+			ret = rte_eth_rx_queue_check_split(port_id, rx_seg, n_seg,
 							   &mbp_buf_size,
 							   &dev_info);
 			if (ret != 0)
@@ -5844,6 +5839,20 @@ rte_eth_ip_reassembly_conf_set(uint16_t port_id,
 		       (*dev->dev_ops->ip_reassembly_conf_set)(dev, conf));
 }
 
+int
+rte_eth_supported_hdrs_get(uint16_t port_id, uint32_t *ptypes)
+{
+	struct rte_eth_dev *dev;
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->hdrs_supported_ptypes_get,
+				-ENOTSUP);
+
+	return eth_err(port_id,
+		       (*dev->dev_ops->hdrs_supported_ptypes_get)(dev, ptypes));
+}
+
 int
 rte_eth_dev_priv_dump(uint16_t port_id, FILE *file)
 {
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index 04cff8ee10..72cac1518e 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -6152,6 +6152,28 @@ rte_eth_tx_buffer(uint16_t port_id, uint16_t queue_id,
 	return rte_eth_tx_buffer_flush(port_id, queue_id, buffer);
 }
 
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Get supported header protocols to split supported by PMD.
+ * The API will return error if the device is not valid.
+ *
+ * @param port_id
+ *   The port identifier of the device.
+ * @param ptype
+ *   Supported protocol headers of driver.
+ * @return
+ *   - (-ENOTSUP) if header protocol is not supported by device.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EIO) if device is removed.
+ *   - (0) on success.
+ */
+__rte_experimental
+int rte_eth_supported_hdrs_get(uint16_t port_id,
+		uint32_t *ptype);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/ethdev/version.map b/lib/ethdev/version.map
index 20391ab29e..7705c0364a 100644
--- a/lib/ethdev/version.map
+++ b/lib/ethdev/version.map
@@ -279,6 +279,9 @@ EXPERIMENTAL {
 	rte_flow_async_action_handle_create;
 	rte_flow_async_action_handle_destroy;
 	rte_flow_async_action_handle_update;
+
+	# added in 22.07
+	rte_eth_supported_hdrs_get;
 };
 
 INTERNAL {
-- 
2.25.1