[PATCH v3 04/15] vdpa/ifc: add vdpa interrupt for blk device

[Maxime Coquelin]

On 1/29/22 04:03, Andy Pei wrote:
> For the blk we need to relay all the cmd of each queue.

The message is not clear to me, do you mean "For the block device type,
we have to relay the commands on all queues."?

> 
> Signed-off-by: Andy Pei <andy.pei at intel.com>
> ---
>   drivers/vdpa/ifc/ifcvf_vdpa.c | 46 ++++++++++++++++++++++++++++++++-----------
>   1 file changed, 35 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/vdpa/ifc/ifcvf_vdpa.c b/drivers/vdpa/ifc/ifcvf_vdpa.c
> index 778e1fd..4f99bb3 100644
> --- a/drivers/vdpa/ifc/ifcvf_vdpa.c
> +++ b/drivers/vdpa/ifc/ifcvf_vdpa.c
> @@ -372,24 +372,48 @@ struct rte_vdpa_dev_info {
>   	irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
>   	irq_set->start = 0;
>   	fd_ptr = (int *)&irq_set->data;
> +	/* The first interrupt is for the configure space change notification */
>   	fd_ptr[RTE_INTR_VEC_ZERO_OFFSET] =
>   		rte_intr_fd_get(internal->pdev->intr_handle);
>   
>   	for (i = 0; i < nr_vring; i++)
>   		internal->intr_fd[i] = -1;
>   
> -	for (i = 0; i < nr_vring; i++) {
> -		rte_vhost_get_vhost_vring(internal->vid, i, &vring);
> -		fd_ptr[RTE_INTR_VEC_RXTX_OFFSET + i] = vring.callfd;
> -		if ((i & 1) == 0 && m_rx == true) {
> -			fd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
> -			if (fd < 0) {
> -				DRV_LOG(ERR, "can't setup eventfd: %s",
> -					strerror(errno));
> -				return -1;
> +	if (internal->device_type == IFCVF_NET) {
> +		for (i = 0; i < nr_vring; i++) {
> +			rte_vhost_get_vhost_vring(internal->vid, i, &vring);
> +			fd_ptr[RTE_INTR_VEC_RXTX_OFFSET + i] = vring.callfd;
> +			if ((i & 1) == 0 && m_rx == true) {
> +				/* For the net we only need to relay rx queue,
> +				 * which will change the mem of VM.
> +				 */
> +				fd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
> +				if (fd < 0) {
> +					DRV_LOG(ERR, "can't setup eventfd: %s",
> +						strerror(errno));
> +					return -1;
> +				}
> +				internal->intr_fd[i] = fd;
> +				fd_ptr[RTE_INTR_VEC_RXTX_OFFSET + i] = fd;
> +			}
> +		}
> +	} else if (internal->device_type == IFCVF_BLK) {
> +		for (i = 0; i < nr_vring; i++) {
> +			rte_vhost_get_vhost_vring(internal->vid, i, &vring);
> +			fd_ptr[RTE_INTR_VEC_RXTX_OFFSET + i] = vring.callfd;
> +			if (m_rx == true) {
> +				/* For the blk we need to relay all the read cmd
> +				 * of each queue
> +				 */
> +				fd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
> +				if (fd < 0) {
> +					DRV_LOG(ERR, "can't setup eventfd: %s",
> +						strerror(errno));
> +					return -1;
> +				}
> +				internal->intr_fd[i] = fd;
> +				fd_ptr[RTE_INTR_VEC_RXTX_OFFSET + i] = fd;


>   			}
> -			internal->intr_fd[i] = fd;
> -			fd_ptr[RTE_INTR_VEC_RXTX_OFFSET + i] = fd;
>   		}
>   	}
>