[PATCH v2 4/5] baseband/acc100: start explicitly PF Monitor from PMD

[Chautru, Nicolas]

Hi Tom, 

> -----Original Message-----
> From: Tom Rix <trix at redhat.com>
> Sent: Sunday, May 8, 2022 6:45 AM
> To: Chautru, Nicolas <nicolas.chautru at intel.com>; dev at dpdk.org;
> gakhil at marvell.com
> Cc: thomas at monjalon.net; Kinsella, Ray <ray.kinsella at intel.com>; Richardson,
> Bruce <bruce.richardson at intel.com>; hemant.agrawal at nxp.com; Zhang,
> Mingshan <mingshan.zhang at intel.com>; david.marchand at redhat.com
> Subject: Re: [PATCH v2 4/5] baseband/acc100: start explicitly PF Monitor from
> PMD
> 
> 
> On 4/27/22 11:17 AM, Nicolas Chautru wrote:
> > Ensure the performance monitor is restarted in case this is reset
> > after VF FLR.
> >
> > Signed-off-by: Nicolas Chautru <nicolas.chautru at intel.com>
> > ---
> >   drivers/baseband/acc100/rte_acc100_pmd.c | 4 ++++
> >   drivers/baseband/acc100/rte_acc100_pmd.h | 6 ++++++
> >   2 files changed, 10 insertions(+)
> >
> > diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c
> > b/drivers/baseband/acc100/rte_acc100_pmd.c
> > index b03cedc..b588f5f 100644
> > --- a/drivers/baseband/acc100/rte_acc100_pmd.c
> > +++ b/drivers/baseband/acc100/rte_acc100_pmd.c
> > @@ -263,6 +263,10 @@
> >   					& 0xF;
> >   	}
> >
> > +	/* Start Pmon */
> > +	acc100_reg_write(d, reg_addr->pmon_ctrl_a, 0x2);
> > +	acc100_reg_write(d, reg_addr->pmon_ctrl_b, 0x2);
> 
> This looks like an acc100 bug fix, so it should be split from the acc101 pathset.
> 
> Where this code is added is fetch_acc100_config, a function that does reads.
> 
> Though convenient, this is likely not the best place to put the writes
> 

OK fair enough It could be part of setup_queues(), Thanks.  

> Tom
> 
> > +
> >   	/* Read PF mode */
> >   	if (d->pf_device) {
> >   		reg_mode = acc100_reg_read(d, HWPfHiPfMode); diff --git
> > a/drivers/baseband/acc100/rte_acc100_pmd.h
> > b/drivers/baseband/acc100/rte_acc100_pmd.h
> > index 6438031..f126cc0 100644
> > --- a/drivers/baseband/acc100/rte_acc100_pmd.h
> > +++ b/drivers/baseband/acc100/rte_acc100_pmd.h
> > @@ -475,6 +475,8 @@ struct acc100_registry_addr {
> >   	unsigned int depth_log1_offset;
> >   	unsigned int qman_group_func;
> >   	unsigned int ddr_range;
> > +	unsigned int pmon_ctrl_a;
> > +	unsigned int pmon_ctrl_b;
> >   };
> >
> >   /* Structure holding registry addresses for PF */ @@ -504,6 +506,8
> > @@ struct acc100_registry_addr {
> >   	.depth_log1_offset = HWPfQmgrGrpDepthLog21Vf,
> >   	.qman_group_func = HWPfQmgrGrpFunction0,
> >   	.ddr_range = HWPfDmaVfDdrBaseRw,
> > +	.pmon_ctrl_a = HWPfPermonACntrlRegVf,
> > +	.pmon_ctrl_b = HWPfPermonBCntrlRegVf,
> >   };
> >
> >   /* Structure holding registry addresses for VF */ @@ -533,6 +537,8
> > @@ struct acc100_registry_addr {
> >   	.depth_log1_offset = HWVfQmgrGrpDepthLog21Vf,
> >   	.qman_group_func = HWVfQmgrGrpFunction0Vf,
> >   	.ddr_range = HWVfDmaDdrBaseRangeRoVf,
> > +	.pmon_ctrl_a = HWVfPmACntrlRegVf,
> > +	.pmon_ctrl_b = HWVfPmBCntrlRegVf,
> >   };
> >
> >   /* Structure associated with each queue. */