[EXT] [PATCH v3 1/7] app/test-crypto-perf: support SDAP for PDCP operations

[Gagandeep Singh]

Hi,

> -----Original Message-----
> From: Akhil Goyal <gakhil at marvell.com>
> Sent: Thursday, May 26, 2022 7:23 PM
> To: Gagandeep Singh <G.Singh at nxp.com>; dev at dpdk.org
> Subject: RE: [EXT] [PATCH v3 1/7] app/test-crypto-perf: support SDAP for PDCP
> operations
> 
> > Add a command line option "--enable-sdap" to enable Service Data
> > Adaptation Protocol.
> >
> > example command:
> > ./dpdk-test-crypto-perf -c 0xc  --log-level=8 -- --devtype
> > crypto_dpaa2_sec --optype pdcp --cipher-algo aes-ctr --cipher-op
> > encrypt --auth-algo zuc-eia3 --auth-op generate --auth-key-sz 16
> > --ptest throughput --total-ops 100000 --burst-sz 64 --buffer-sz
> > 64,390,1512  --pool-sz 4096 --silent --pdcp-sn-sz 12 --pdcp-domain
> > control --enable-sdap
> >
> > Signed-off-by: Gagandeep Singh <g.singh at nxp.com>
> > ---
> >  app/test-crypto-perf/cperf_ops.c             |  1 +
> >  app/test-crypto-perf/cperf_options.h         |  2 ++
> >  app/test-crypto-perf/cperf_options_parsing.c | 12 ++++++++++++
> >  doc/guides/tools/cryptoperf.rst              |  4 ++++
> >  4 files changed, 19 insertions(+)
> >
> > diff --git a/app/test-crypto-perf/cperf_ops.c
> > b/app/test-crypto-perf/cperf_ops.c
> > index cbefce8d6c..4295656a0b 100644
> > --- a/app/test-crypto-perf/cperf_ops.c
> > +++ b/app/test-crypto-perf/cperf_ops.c
> > @@ -861,6 +861,7 @@ cperf_create_session(struct rte_mempool *sess_mp,
> >  				.hfn = options->pdcp_ses_hfn_en ?
> >  					PDCP_DEFAULT_HFN : 0,
> >  				.hfn_threshold = 0x70C0A,
> > +				.sdap_enabled = options->pdcp_sdap,
> >  				.hfn_ovrd = !(options->pdcp_ses_hfn_en),
> >  			} },
> >  			.crypto_xform = &cipher_xform
> > diff --git a/app/test-crypto-perf/cperf_options.h b/app/test-crypto-
> > perf/cperf_options.h index 09caefde22..613d6d31e2 100644
> > --- a/app/test-crypto-perf/cperf_options.h
> > +++ b/app/test-crypto-perf/cperf_options.h
> > @@ -14,6 +14,7 @@
> >  #define CPERF_PTEST_TYPE	("ptest")
> >  #define CPERF_MODEX_LEN		("modex-len")
> >  #define CPERF_SILENT		("silent")
> > +#define CPERF_ENABLE_SDAP	("enable-sdap")
> >
> >  #define CPERF_POOL_SIZE		("pool-sz")
> >  #define CPERF_TOTAL_OPS		("total-ops")
> > @@ -129,6 +130,7 @@ struct cperf_options {  #ifdef RTE_LIB_SECURITY
> >  	uint16_t pdcp_sn_sz;
> >  	uint16_t pdcp_ses_hfn_en;
> > +	uint16_t pdcp_sdap;
> >  	enum rte_security_pdcp_domain pdcp_domain;
> >  	uint16_t docsis_hdr_sz;
> >  #endif
> > diff --git a/app/test-crypto-perf/cperf_options_parsing.c
> > b/app/test-crypto- perf/cperf_options_parsing.c index
> > 09c98121c8..28680347f1 100644
> > --- a/app/test-crypto-perf/cperf_options_parsing.c
> > +++ b/app/test-crypto-perf/cperf_options_parsing.c
> > @@ -64,6 +64,7 @@ usage(char *progname)
> >  		" --pdcp-sn-sz N: set PDCP SN size N <5/7/12/15/18>\n"
> >  		" --pdcp-domain DOMAIN: set PDCP domain <control/user>\n"
> >  		" --pdcp-ses-hfn-en: enable session based fixed HFN\n"
> > +		" --enable-sdap: enable sdap\n"
> >  		" --docsis-hdr-sz: set DOCSIS header size\n"
> >  #endif
> >  		" -h: prints this help\n",
> > @@ -548,6 +549,15 @@ parse_silent(struct cperf_options *opts,
> >  	return 0;
> >  }
> >
> > +static int
> > +parse_enable_sdap(struct cperf_options *opts,
> > +		const char *arg __rte_unused)
> > +{
> > +	opts->pdcp_sdap = 1;
> > +
> > +	return 0;
> > +}
> 
> You should also set a default value of this flag.

Default functionality is disable SDAP. Application is defining the cperf options with all values 0s in its main(): "struct cperf_options opts = {0};". Is n't it sufficient?