[PATCH v7 1/8] net/gve/base: introduce base code

[Ferruh Yigit]

On 10/21/2022 10:19 AM, Junfeng Guo wrote:
> +int gve_adminq_describe_device(struct gve_priv *priv)
> +{
> +	struct gve_device_option_jumbo_frames *dev_op_jumbo_frames = NULL;
> +	struct gve_device_option_gqi_rda *dev_op_gqi_rda = NULL;
> +	struct gve_device_option_gqi_qpl *dev_op_gqi_qpl = NULL;
> +	struct gve_device_option_dqo_rda *dev_op_dqo_rda = NULL;
> +	struct gve_device_descriptor *descriptor;
> +	struct gve_dma_mem descriptor_dma_mem;
> +	u32 supported_features_mask = 0;
> +	union gve_adminq_command cmd;
> +	int err = 0;
> +	u8 *mac;
> +	u16 mtu;
> +
> +	memset(&cmd, 0, sizeof(cmd));
> +	descriptor = gve_alloc_dma_mem(&descriptor_dma_mem, PAGE_SIZE);
> +	if (!descriptor)
> +		return -ENOMEM;
> +	cmd.opcode = cpu_to_be32(GVE_ADMINQ_DESCRIBE_DEVICE);
> +	cmd.describe_device.device_descriptor_addr =
> +					cpu_to_be64(descriptor_dma_mem.pa);
> +	cmd.describe_device.device_descriptor_version =
> +			cpu_to_be32(GVE_ADMINQ_DEVICE_DESCRIPTOR_VERSION);
> +	cmd.describe_device.available_length = cpu_to_be32(PAGE_SIZE);
> +
> +	err = gve_adminq_execute_cmd(priv, &cmd);
> +	if (err)
> +		goto free_device_descriptor;
> +
> +	err = gve_process_device_options(priv, descriptor, &dev_op_gqi_rda,
> +					 &dev_op_gqi_qpl, &dev_op_dqo_rda,
> +					 &dev_op_jumbo_frames);
> +	if (err)
> +		goto free_device_descriptor;
> +
> +	/* If the GQI_RAW_ADDRESSING option is not enabled and the queue format
> +	 * is not set to GqiRda, choose the queue format in a priority order:
> +	 * DqoRda, GqiRda, GqiQpl. Use GqiQpl as default.
> +	 */
> +	if (dev_op_dqo_rda) {
> +		priv->queue_format = GVE_DQO_RDA_FORMAT;
> +		PMD_DRV_LOG(INFO, "Driver is running with DQO RDA queue format.");
> +		supported_features_mask =
> +			be32_to_cpu(dev_op_dqo_rda->supported_features_mask);
> +	} else if (dev_op_gqi_rda) {
> +		priv->queue_format = GVE_GQI_RDA_FORMAT;
> +		PMD_DRV_LOG(INFO, "Driver is running with GQI RDA queue format.");
> +		supported_features_mask =
> +			be32_to_cpu(dev_op_gqi_rda->supported_features_mask);
> +	} else if (priv->queue_format == GVE_GQI_RDA_FORMAT) {
> +		PMD_DRV_LOG(INFO, "Driver is running with GQI RDA queue format.");
> +	} else {
> +		priv->queue_format = GVE_GQI_QPL_FORMAT;
> +		if (dev_op_gqi_qpl)
> +			supported_features_mask =
> +				be32_to_cpu(dev_op_gqi_qpl->supported_features_mask);
> +		PMD_DRV_LOG(INFO, "Driver is running with GQI QPL queue format.");
> +	}
> +	if (gve_is_gqi(priv)) {
> +		err = gve_set_desc_cnt(priv, descriptor);
> +	} else {
> +		/* DQO supports LRO. */
> +		err = gve_set_desc_cnt_dqo(priv, descriptor, dev_op_dqo_rda);
> +	}
> +	if (err)
> +		goto free_device_descriptor;
> +
> +	priv->max_registered_pages =
> +				be64_to_cpu(descriptor->max_registered_pages);
> +	mtu = be16_to_cpu(descriptor->mtu);
> +	if (mtu < ETH_MIN_MTU) {
> +		PMD_DRV_LOG(ERR, "MTU %d below minimum MTU", mtu);
> +		err = -EINVAL;
> +		goto free_device_descriptor;
> +	}
> +	priv->max_mtu = mtu;
> +	priv->num_event_counters = be16_to_cpu(descriptor->counters);
> +	rte_memcpy(priv->dev_addr.addr_bytes, descriptor->mac, ETH_ALEN);
> +	mac = descriptor->mac;
> +	PMD_DRV_LOG(INFO, "MAC addr: %02x:%02x:%02x:%02x:%02x:%02x",
> +		    mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);


There are 'RTE_ETHER_ADDR_PRT_FMT' & 'RTE_ETHER_ADDR_BYTES' macros for 
this purpose, you can use it like:

PMD_DRV_LOG(INFO, "MAC addr" RTE_ETHER_ADDR_PRT_FMT, 
RTE_ETHER_ADDR_BYTES(priv->dev_addr));

So can get rid of 'mac' variable.