[Patch v6 01/18] net/mana: add basic driver, build environment and doc

[lihuisong (C)]

在 2022/9/7 9:36, Long Li 写道:
>> Subject: Re: [Patch v6 01/18] net/mana: add basic driver, build environment
>> and doc
>>
>>
>> 在 2022/9/1 2:05, Long Li 写道:
>>>> Subject: Re: [Patch v6 01/18] net/mana: add basic driver, build
>>>> environment and doc
>>>>
>>>>
>>>> 在 2022/8/31 6:51, longli at linuxonhyperv.com 写道:
>>>>> From: Long Li <longli at microsoft.com>
>>>>>
>>>>> MANA is a PCI device. It uses IB verbs to access hardware through
>>>>> the kernel RDMA layer. This patch introduces build environment and
>>>>> basic device probe functions.
>>>>>
>>>>> Signed-off-by: Long Li <longli at microsoft.com>
>>>>> ---
>>>>> Change log:
>>>>> v2:
>>>>> Fix typos.
>>>>> Make the driver build only on x86-64 and Linux.
>>>>> Remove unused header files.
>>>>> Change port definition to uint16_t or uint8_t (for IB).
>>>>> Use getline() in place of fgets() to read and truncate a line.
>>>>> v3:
>>>>> Add meson build check for required functions from RDMA direct verb
>>>>> header file
>>>>> v4:
>>>>> Remove extra "\n" in logging code.
>>>>> Use "r" in place of "rb" in fopen() to read text files.
>>>>>
>>>>> [snip]
>>>>> +
>>>>> +static int mana_pci_probe_mac(struct rte_pci_driver *pci_drv
>>>> __rte_unused,
>>>>> +			      struct rte_pci_device *pci_dev,
>>>>> +			      struct rte_ether_addr *mac_addr) {
>>>>> +	struct ibv_device **ibv_list;
>>>>> +	int ibv_idx;
>>>>> +	struct ibv_context *ctx;
>>>>> +	struct ibv_device_attr_ex dev_attr;
>>>>> +	int num_devices;
>>>>> +	int ret = 0;
>>>>> +	uint8_t port;
>>>>> +	struct mana_priv *priv = NULL;
>>>>> +	struct rte_eth_dev *eth_dev = NULL;
>>>>> +	bool found_port;
>>>>> +
>>>>> +	ibv_list = ibv_get_device_list(&num_devices);
>>>>> +	for (ibv_idx = 0; ibv_idx < num_devices; ibv_idx++) {
>>>>> +		struct ibv_device *ibdev = ibv_list[ibv_idx];
>>>>> +		struct rte_pci_addr pci_addr;
>>>>> +
>>>>> +		DRV_LOG(INFO, "Probe device name %s dev_name %s
>>>> ibdev_path %s",
>>>>> +			ibdev->name, ibdev->dev_name, ibdev-
>>>>> ibdev_path);
>>>>> +
>>>>> +		if (mana_ibv_device_to_pci_addr(ibdev, &pci_addr))
>>>>> +			continue;
>>>>> +
>>>>> +		/* Ignore if this IB device is not this PCI device */
>>>>> +		if (pci_dev->addr.domain != pci_addr.domain ||
>>>>> +		    pci_dev->addr.bus != pci_addr.bus ||
>>>>> +		    pci_dev->addr.devid != pci_addr.devid ||
>>>>> +		    pci_dev->addr.function != pci_addr.function)
>>>>> +			continue;
>>>>> +
>>>>> +		ctx = ibv_open_device(ibdev);
>>>>> +		if (!ctx) {
>>>>> +			DRV_LOG(ERR, "Failed to open IB device %s",
>>>>> +				ibdev->name);
>>>>> +			continue;
>>>>> +		}
>>>>> +
>>>>> +		ret = ibv_query_device_ex(ctx, NULL, &dev_attr);
>>>>> +		DRV_LOG(INFO, "dev_attr.orig_attr.phys_port_cnt %u",
>>>>> +			dev_attr.orig_attr.phys_port_cnt);
>>>>> +		found_port = false;
>>>>> +
>>>>> +		for (port = 1; port <= dev_attr.orig_attr.phys_port_cnt;
>>>>> +		     port++) {
>>>>> +			struct ibv_parent_domain_init_attr attr = {};
>>>>> +			struct rte_ether_addr addr;
>>>>> +			char address[64];
>>>>> +			char name[RTE_ETH_NAME_MAX_LEN];
>>>>> +
>>>>> +			ret = get_port_mac(ibdev, port, &addr);
>>>>> +			if (ret)
>>>>> +				continue;
>>>>> +
>>>>> +			if (mac_addr && !rte_is_same_ether_addr(&addr,
>>>> mac_addr))
>>>>> +				continue;
>>>>> +
>>>>> +			rte_ether_format_addr(address, sizeof(address),
>>>> &addr);
>>>>> +			DRV_LOG(INFO, "device located port %u address
>>>> %s",
>>>>> +				port, address);
>>>>> +			found_port = true;
>>>>> +
>>>>> +			priv = rte_zmalloc_socket(NULL, sizeof(*priv),
>>>>> +						  RTE_CACHE_LINE_SIZE,
>>>>> +						  SOCKET_ID_ANY);
>>>>> +			if (!priv) {
>>>>> +				ret = -ENOMEM;
>>>>> +				goto failed;
>>>>> +			}
>>>>> +
>>>>> +			snprintf(name, sizeof(name), "%s_port%d",
>>>>> +				 pci_dev->device.name, port);
>>>>> +
>>>>> +			if (rte_eal_process_type() ==
>>>> RTE_PROC_SECONDARY) {
>>>>> +				int fd;
>>>>> +
>>>>> +				eth_dev =
>>>> rte_eth_dev_attach_secondary(name);
>>>>> +				if (!eth_dev) {
>>>>> +					DRV_LOG(ERR, "Can't attach to dev
>>>> %s",
>>>>> +						name);
>>>>> +					ret = -ENOMEM;
>>>>> +					goto failed;
>>>>> +				}
>>>>> +
>>>>> +				eth_dev->device = &pci_dev->device;
>>>>> +				eth_dev->dev_ops = &mana_dev_sec_ops;
>>>>> +				ret = mana_proc_priv_init(eth_dev);
>>>>> +				if (ret)
>>>>> +					goto failed;
>>>>> +				priv->process_priv = eth_dev-
>>>>> process_private;
>>>>> +
>>>>> +				/* Get the IB FD from the primary process */
>>>>> +				fd =
>>>> mana_mp_req_verbs_cmd_fd(eth_dev);
>>>>> +				if (fd < 0) {
>>>>> +					DRV_LOG(ERR, "Failed to get FD %d",
>>>> fd);
>>>>> +					ret = -ENODEV;
>>>>> +					goto failed;
>>>>> +				}
>>>>> +
>>>>> +				ret =
>>>> mana_map_doorbell_secondary(eth_dev, fd);
>>>>> +				if (ret) {
>>>>> +					DRV_LOG(ERR, "Failed secondary
>>>> map %d",
>>>>> +						fd);
>>>>> +					goto failed;
>>>>> +				}
>>>>> +
>>>>> +				/* fd is no not used after mapping doorbell */
>>>>> +				close(fd);
>>>>> +
>>>>> +				rte_spinlock_lock(&mana_shared_data-
>>>>> lock);
>>>>> +				mana_shared_data->secondary_cnt++;
>>>>> +				mana_local_data.secondary_cnt++;
>>>>> +				rte_spinlock_unlock(&mana_shared_data-
>>>>> lock);
>>>>> +
>>>>> +				rte_eth_copy_pci_info(eth_dev, pci_dev);
>>>>> +				rte_eth_dev_probing_finish(eth_dev);
>>>>> +
>>>>> +				/* Impossible to have more than one port
>>>>> +				 * matching a MAC address
>>>>> +				 */
>>>>> +				continue;
>>>>> +			}
>>>>> +
>>>>> +			eth_dev = rte_eth_dev_allocate(name);
>>>>> +			if (!eth_dev) {
>>>>> +				ret = -ENOMEM;
>>>>> +				goto failed;
>>>>> +			}
>>>>> +
>>>>> +			eth_dev->data->mac_addrs =
>>>>> +				rte_calloc("mana_mac", 1,
>>>>> +					   sizeof(struct rte_ether_addr), 0);
>>>>> +			if (!eth_dev->data->mac_addrs) {
>>>>> +				ret = -ENOMEM;
>>>>> +				goto failed;
>>>>> +			}
>>>>> +
>>>>> +			rte_ether_addr_copy(&addr, eth_dev->data-
>>>>> mac_addrs);
>>>>> +
>>>>> +			priv->ib_pd = ibv_alloc_pd(ctx);
>>>>> +			if (!priv->ib_pd) {
>>>>> +				DRV_LOG(ERR, "ibv_alloc_pd failed port %d",
>>>> port);
>>>>> +				ret = -ENOMEM;
>>>>> +				goto failed;
>>>>> +			}
>>>>> +
>>>>> +			/* Create a parent domain with the port number */
>>>>> +			attr.pd = priv->ib_pd;
>>>>> +			attr.comp_mask =
>>>> IBV_PARENT_DOMAIN_INIT_ATTR_PD_CONTEXT;
>>>>> +			attr.pd_context = (void *)(uint64_t)port;
>>>>> +			priv->ib_parent_pd = ibv_alloc_parent_domain(ctx,
>>>> &attr);
>>>>> +			if (!priv->ib_parent_pd) {
>>>>> +				DRV_LOG(ERR,
>>>>> +					"ibv_alloc_parent_domain failed port
>>>> %d",
>>>>> +					port);
>>>>> +				ret = -ENOMEM;
>>>>> +				goto failed;
>>>>> +			}
>>>>> +
>>>>> +			priv->ib_ctx = ctx;
>>>>> +			priv->port_id = eth_dev->data->port_id;
>>>>> +			priv->dev_port = port;
>>>>> +			eth_dev->data->dev_private = priv;
>>>>> +			priv->dev_data = eth_dev->data;
>>>>> +
>>>>> +			priv->max_rx_queues = dev_attr.orig_attr.max_qp;
>>>>> +			priv->max_tx_queues = dev_attr.orig_attr.max_qp;
>>>>> +
>>>>> +			priv->max_rx_desc =
>>>>> +				RTE_MIN(dev_attr.orig_attr.max_qp_wr,
>>>>> +					dev_attr.orig_attr.max_cqe);
>>>>> +			priv->max_tx_desc =
>>>>> +				RTE_MIN(dev_attr.orig_attr.max_qp_wr,
>>>>> +					dev_attr.orig_attr.max_cqe);
>>>>> +
>>>>> +			priv->max_send_sge = dev_attr.orig_attr.max_sge;
>>>>> +			priv->max_recv_sge = dev_attr.orig_attr.max_sge;
>>>>> +
>>>>> +			priv->max_mr = dev_attr.orig_attr.max_mr;
>>>>> +			priv->max_mr_size =
>>>> dev_attr.orig_attr.max_mr_size;
>>>>> +
>>>>> +			DRV_LOG(INFO, "dev %s max queues %d desc %d
>>>> sge %d",
>>>>> +				name, priv->max_rx_queues, priv-
>>>>> max_rx_desc,
>>>>> +				priv->max_send_sge);
>>>>> +
>>>>> +			rte_spinlock_lock(&mana_shared_data->lock);
>>>>> +			mana_shared_data->primary_cnt++;
>>>>> +			rte_spinlock_unlock(&mana_shared_data->lock);
>>>>> +
>>>>> +			eth_dev->data->dev_flags |=
>>>> RTE_ETH_DEV_INTR_RMV;
>>>>> +
>>>>> +			eth_dev->device = &pci_dev->device;
>>>>> +			eth_dev->data->dev_flags |=
>>>>> +				RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
>>>>> +
>>>> Please do not use the temporary macro. Please review this patch:
>>>>
>>>> f30e69b41f94 ("ethdev: add device flag to bypass auto-filled queue
>>>> xstats")
>>>>
>>>> This patch requires that per queue statistics are filled in
>>>> .xstats_get() by PMD.
>>> Thanks for pointing this out.
>>>
>>> It seems some PMDs are still depending on this flag for xstats.
>>>
>>> MANA doesn't implement xstats_get() currently, this flag is useful. Is it
>> okay to keep using this flag before it's finally the time to remove it from all
>> PMDs, or when MANA implements xstats?
>> Yes, your xstats doesn't implement now. Per queue stats should be filled in
>> xstats API, and the stats API cannot see per queue stats, so stats API in driver
>> shouldn't fill it(suggest that delete it from patch 17/18).
>>
>> I guess this flag can be removed if PMD does not support xstats.
>>>
> I don't understand your suggestion. An application can call rte_eth_stats_get() to get port stats, and this will call into stats_get() in the driver, as implemented in patch 17/18.
>
> When flag RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS  is set, an application can also use rte_eth_xstats_get() to get port stats even the driver doesn't implement xstats_get().

I think new PMD should follow the announced switch Ferruh mentioned, 
otherwise, the switch will never be completed.

Suggest that mana driver can implement a simple xstats_get() to fill per 
queue stats if you want to support per queue stats.

@Ferruh, what do you think?