[PATCH v2 3/5] crypto/ipsec_mb: add remaining SGL support

[De Lara Guarch, Pablo]

Hi Ciara,

> -----Original Message-----
> From: Power, Ciara <ciara.power at intel.com>
> Sent: Thursday, August 25, 2022 3:29 PM
> To: Zhang, Roy Fan <roy.fan.zhang at intel.com>; De Lara Guarch, Pablo
> <pablo.de.lara.guarch at intel.com>
> Cc: dev at dpdk.org; Ji, Kai <kai.ji at intel.com>; Power, Ciara
> <ciara.power at intel.com>
> Subject: [PATCH v2 3/5] crypto/ipsec_mb: add remaining SGL support
> 
> The intel-ipsec-mb library supports SGL for GCM and ChaChaPoly algorithms
> using the JOB API.
> This support was added to AESNI_MB PMD previously, but the SGL feature
> flags could not be added due to no SGL support for other algorithms.
> 
> This patch adds a workaround SGL approach for other algorithms using the
> JOB API. The segmented input buffers are copied into a linear buffer, which is
> passed as a single job to intel-ipsec-mb.
> The job is processed, and on return, the linear buffer is split into the original
> destination segments.
> 
> Existing AESNI_MB testcases are passing with these feature flags added.
> 
> Signed-off-by: Ciara Power <ciara.power at intel.com>
> 
> ---
> v2:
>   - Small improvements when copying segments to linear buffer.
>   - Added documentation changes.
> ---
>  doc/guides/cryptodevs/aesni_mb.rst          |   1 -
>  doc/guides/cryptodevs/features/aesni_mb.ini |   4 +
>  doc/guides/rel_notes/release_22_11.rst      |   4 +
>  drivers/crypto/ipsec_mb/pmd_aesni_mb.c      | 191 ++++++++++++++++----
>  4 files changed, 166 insertions(+), 34 deletions(-)
> 

...

> +++ b/drivers/crypto/ipsec_mb/pmd_aesni_mb.c

...

> 
> +static int
> +handle_sgl_linear(IMB_JOB *job, struct rte_crypto_op *op, uint32_t
> dst_offset,
> +		struct aesni_mb_session *session)
> +{
> +	uint64_t cipher_len, auth_len;
> +	uint8_t *src, *linear_buf = NULL;
> +	int total_len;
> +	int lb_offset = 0;

Suggest using unsigned here (probably uint64_t for total_len, as it gets the value from max between cipher_len and auth_len).

> +	struct rte_mbuf *src_seg;
> +	uint16_t src_len;
> +
> +	if (job->cipher_mode == IMB_CIPHER_SNOW3G_UEA2_BITLEN ||
> +			job->cipher_mode ==
> IMB_CIPHER_KASUMI_UEA1_BITLEN)
> +		cipher_len = (job->msg_len_to_cipher_in_bits >> 3) +
> +				(job->cipher_start_src_offset_in_bits >> 3);
> +	else
> +		cipher_len = job->msg_len_to_cipher_in_bytes +
> +				job->cipher_start_src_offset_in_bytes;
> +
> +	if (job->hash_alg == IMB_AUTH_SNOW3G_UIA2_BITLEN ||
> +			job->hash_alg == IMB_AUTH_ZUC_EIA3_BITLEN)
> +		auth_len = (job->msg_len_to_hash_in_bits >> 3) +
> +				job->hash_start_src_offset_in_bytes;
> +	else if (job->hash_alg == IMB_AUTH_AES_GMAC)
> +		auth_len = job->u.GCM.aad_len_in_bytes;
> +	else
> +		auth_len = job->msg_len_to_hash_in_bytes +
> +				job->hash_start_src_offset_in_bytes;
> +
> +	total_len = RTE_MAX(auth_len, cipher_len);
> +	linear_buf = rte_zmalloc(NULL, total_len + job-
> >auth_tag_output_len_in_bytes, 0);
> +	if (linear_buf == NULL) {
> +		IPSEC_MB_LOG(ERR, "Error allocating memory for SGL Linear
> Buffer\n");
> +		return -1;
> +	}
> +

..

> +static void
> +post_process_sgl_linear(struct rte_crypto_op *op, IMB_JOB *job,
> +		struct aesni_mb_session *sess, uint8_t *linear_buf) {
> +
> +	int lb_offset = 0;
> +	struct rte_mbuf *m_dst = op->sym->m_dst == NULL ?
> +			op->sym->m_src : op->sym->m_dst;
> +	uint16_t total_len, dst_len;
> +	uint64_t cipher_len, auth_len;
> +	uint8_t *dst;
> +
> +	if (job->cipher_mode == IMB_CIPHER_SNOW3G_UEA2_BITLEN ||
> +			job->cipher_mode ==
> IMB_CIPHER_KASUMI_UEA1_BITLEN)
> +		cipher_len = (job->msg_len_to_cipher_in_bits >> 3) +
> +				(job->cipher_start_src_offset_in_bits >> 3);
> +	else
> +		cipher_len = job->msg_len_to_cipher_in_bytes +
> +				job->cipher_start_src_offset_in_bytes;
> +
> +	if (job->hash_alg == IMB_AUTH_SNOW3G_UIA2_BITLEN ||
> +			job->hash_alg == IMB_AUTH_ZUC_EIA3_BITLEN)
> +		auth_len = (job->msg_len_to_hash_in_bits >> 3) +
> +				job->hash_start_src_offset_in_bytes;
> +	else if (job->hash_alg == IMB_AUTH_AES_GMAC)
> +		auth_len = job->u.GCM.aad_len_in_bytes;
> +	else
> +		auth_len = job->msg_len_to_hash_in_bytes +
> +				job->hash_start_src_offset_in_bytes;
> +

This code above is the same as the code in handle_sgl_linear.
Maybe you can have a separate function and remove duplication.