[PATCH V3] net/bonding: add link speeds configuration

Huisong Li lihuisong at huawei.com
Thu Sep 22 03:33:17 CEST 2022


This patch adds link speeds configuration.

---
 -v3: add an intersection of the supported speeds to check 'link_speeds'.
 -v2: resend due to CI compiling failure.

Signed-off-by: Huisong Li <lihuisong at huawei.com>
---
 drivers/net/bonding/eth_bond_private.h |  3 +++
 drivers/net/bonding/rte_eth_bond_api.c |  3 +++
 drivers/net/bonding/rte_eth_bond_pmd.c | 27 ++++++++++++++++++++++++++
 3 files changed, 33 insertions(+)

diff --git a/drivers/net/bonding/eth_bond_private.h b/drivers/net/bonding/eth_bond_private.h
index 8222e3cd38..d067ea8c9a 100644
--- a/drivers/net/bonding/eth_bond_private.h
+++ b/drivers/net/bonding/eth_bond_private.h
@@ -131,6 +131,9 @@ struct bond_dev_private {
 	uint32_t link_down_delay_ms;
 	uint32_t link_up_delay_ms;
 
+	uint32_t speed_capa;
+	/**< Supported speeds bitmap (RTE_ETH_LINK_SPEED_). */
+
 	uint16_t nb_rx_queues;			/**< Total number of rx queues */
 	uint16_t nb_tx_queues;			/**< Total number of tx queues*/
 
diff --git a/drivers/net/bonding/rte_eth_bond_api.c b/drivers/net/bonding/rte_eth_bond_api.c
index 4ac191c468..e64ec0ed20 100644
--- a/drivers/net/bonding/rte_eth_bond_api.c
+++ b/drivers/net/bonding/rte_eth_bond_api.c
@@ -513,6 +513,8 @@ __eth_bond_slave_add_lock_free(uint16_t bonded_port_id, uint16_t slave_port_id)
 		internals->primary_port = slave_port_id;
 		internals->current_primary_port = slave_port_id;
 
+		internals->speed_capa = dev_info.speed_capa;
+
 		/* Inherit queues settings from first slave */
 		internals->nb_rx_queues = slave_eth_dev->data->nb_rx_queues;
 		internals->nb_tx_queues = slave_eth_dev->data->nb_tx_queues;
@@ -527,6 +529,7 @@ __eth_bond_slave_add_lock_free(uint16_t bonded_port_id, uint16_t slave_port_id)
 	} else {
 		int ret;
 
+		internals->speed_capa &= dev_info.speed_capa;
 		eth_bond_slave_inherit_dev_info_rx_next(internals, &dev_info);
 		eth_bond_slave_inherit_dev_info_tx_next(internals, &dev_info);
 
diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index 3191158ca7..0adbf0e1b2 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -1717,6 +1717,8 @@ slave_configure(struct rte_eth_dev *bonded_eth_dev,
 
 	slave_eth_dev->data->dev_conf.rxmode.mtu =
 			bonded_eth_dev->data->dev_conf.rxmode.mtu;
+	slave_eth_dev->data->dev_conf.link_speeds =
+			bonded_eth_dev->data->dev_conf.link_speeds;
 
 	slave_eth_dev->data->dev_conf.txmode.offloads |=
 		bonded_eth_dev->data->dev_conf.txmode.offloads;
@@ -2275,6 +2277,7 @@ bond_ethdev_info(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 
 	dev_info->reta_size = internals->reta_size;
 	dev_info->hash_key_size = internals->rss_key_len;
+	dev_info->speed_capa = internals->speed_capa;
 
 	return 0;
 }
@@ -3591,6 +3594,7 @@ bond_ethdev_configure(struct rte_eth_dev *dev)
 	uint64_t offloads;
 	int arg_count;
 	uint16_t port_id = dev - rte_eth_devices;
+	uint32_t link_speeds;
 	uint8_t agg_mode;
 
 	static const uint8_t default_rss_key[40] = {
@@ -3659,6 +3663,29 @@ bond_ethdev_configure(struct rte_eth_dev *dev)
 		dev->data->dev_conf.txmode.offloads = offloads;
 	}
 
+	link_speeds = dev->data->dev_conf.link_speeds;
+	/*
+	 * The default value of 'link_speeds' is zero. From its definition,
+	 * this value actually means auto-negotiation. But not all PMDs support
+	 * auto-negotiation. So ignore the check for the auto-negotiation and
+	 * only consider fixed speed to reduce the impact on PMDs.
+	 */
+	if (link_speeds & RTE_ETH_LINK_SPEED_FIXED) {
+		if ((link_speeds &
+		    (internals->speed_capa & ~RTE_ETH_LINK_SPEED_FIXED)) == 0) {
+			RTE_BOND_LOG(ERR, "the fixed speed is not supported by all slave devices.");
+			return -EINVAL;
+		}
+		/*
+		 * Two '1' in binary of 'link_speeds': bit0 and a unique
+		 * speed bit.
+		 */
+		if (__builtin_popcountl(link_speeds) != 2) {
+			RTE_BOND_LOG(ERR, "please set a unique speed.");
+			return -EINVAL;
+		}
+	}
+
 	/* set the max_rx_pktlen */
 	internals->max_rx_pktlen = internals->candidate_max_rx_pktlen;
 
-- 
2.22.0



More information about the dev mailing list