[PATCH v4 12/14] baseband/acc: add device status and vf2pf comms

[Maxime Coquelin]

On 9/22/22 02:27, Nic Chautru wrote:
> Add support to expose the device status seen from the
> host through v2pf mailbox communication.
> 
> Signed-off-by: Nic Chautru <nicolas.chautru at intel.com>
> ---
>   drivers/baseband/acc/rte_acc200_pmd.c | 61 +++++++++++++++++++++++++----------
>   1 file changed, 44 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/baseband/acc/rte_acc200_pmd.c b/drivers/baseband/acc/rte_acc200_pmd.c
> index b8b621a..3c2931b 100644
> --- a/drivers/baseband/acc/rte_acc200_pmd.c
> +++ b/drivers/baseband/acc/rte_acc200_pmd.c
> @@ -201,23 +201,47 @@
>   	rte_bbdev_log_debug(
>   			"%s Config LLR SIGN IN/OUT %s %s QG %u %u %u %u %u AQ %u %u %u %u %u Len %u %u %u %u %u\n",
>   			(d->pf_device) ? "PF" : "VF",
> -			(acc_conf->input_pos_llr_1_bit) ? "POS" : "NEG",
> -			(acc_conf->output_pos_llr_1_bit) ? "POS" : "NEG",
> -			acc_conf->q_ul_4g.num_qgroups,
> -			acc_conf->q_dl_4g.num_qgroups,
> -			acc_conf->q_ul_5g.num_qgroups,
> -			acc_conf->q_dl_5g.num_qgroups,
> -			acc_conf->q_fft.num_qgroups,
> -			acc_conf->q_ul_4g.num_aqs_per_groups,
> -			acc_conf->q_dl_4g.num_aqs_per_groups,
> -			acc_conf->q_ul_5g.num_aqs_per_groups,
> -			acc_conf->q_dl_5g.num_aqs_per_groups,
> -			acc_conf->q_fft.num_aqs_per_groups,
> -			acc_conf->q_ul_4g.aq_depth_log2,
> -			acc_conf->q_dl_4g.aq_depth_log2,
> -			acc_conf->q_ul_5g.aq_depth_log2,
> -			acc_conf->q_dl_5g.aq_depth_log2,
> -			acc_conf->q_fft.aq_depth_log2);
> +			(acc200_conf->input_pos_llr_1_bit) ? "POS" : "NEG",
> +			(acc200_conf->output_pos_llr_1_bit) ? "POS" : "NEG",
> +			acc200_conf->q_ul_4g.num_qgroups,
> +			acc200_conf->q_dl_4g.num_qgroups,
> +			acc200_conf->q_ul_5g.num_qgroups,
> +			acc200_conf->q_dl_5g.num_qgroups,
> +			acc200_conf->q_fft.num_qgroups,
> +			acc200_conf->q_ul_4g.num_aqs_per_groups,
> +			acc200_conf->q_dl_4g.num_aqs_per_groups,
> +			acc200_conf->q_ul_5g.num_aqs_per_groups,
> +			acc200_conf->q_dl_5g.num_aqs_per_groups,
> +			acc200_conf->q_fft.num_aqs_per_groups,
> +			acc200_conf->q_ul_4g.aq_depth_log2,
> +			acc200_conf->q_dl_4g.aq_depth_log2,
> +			acc200_conf->q_ul_5g.aq_depth_log2,
> +			acc200_conf->q_dl_5g.aq_depth_log2,
> +			acc200_conf->q_fft.aq_depth_log2);
> +}
> +
> +static inline void
> +acc200_vf2pf(struct acc_device *d, unsigned int payload)
> +{
> +	acc_reg_write(d, HWVfHiVfToPfDbellVf, payload);
> +}
> +
> +/* Request device status information */
> +static inline uint32_t
> +acc200_device_status(struct rte_bbdev *dev)
> +{
> +	struct acc_device *d = dev->data->dev_private;
> +	uint32_t reg, time_out = 0;
> +	if (d->pf_device)
> +		return RTE_BBDEV_DEV_NOT_SUPPORTED;
> +	acc200_vf2pf(d, ACC_VF2PF_STATUS_REQUEST);
> +	reg = acc_reg_read(d, HWVfHiPfToVfDbellVf);
> +	while ((time_out < ACC200_STATUS_TO) && (reg == RTE_BBDEV_DEV_NOSTATUS)) {
> +		usleep(ACC200_STATUS_WAIT); /*< Wait or VF->PF->VF Comms */
> +		reg = acc_reg_read(d, HWVfHiPfToVfDbellVf);
> +		time_out++;
> +	}
> +	return reg;

Please add new lines for clarity.
>   }
>   
>   /* Checks PF Info Ring to find the interrupt cause and handles it accordingly */
> @@ -537,6 +561,7 @@
>   
>   	/* Mark as configured properly */
>   	d->configured = true;
> +	acc200_vf2pf(d, ACC_VF2PF_USING_VF);
>   
>   	rte_bbdev_log_debug(
>   			"ACC200 (%s) configured  sw_rings = %p, sw_rings_iova = %#"
> @@ -1047,6 +1072,8 @@
>   
>   	/* Read and save the populated config from ACC200 registers */
>   	fetch_acc200_config(dev);
> +	/* Check the status of device */
> +	dev_info->device_status = acc200_device_status(dev);
>   
>   	/* Exposed number of queues */
>   	dev_info->num_queues[RTE_BBDEV_OP_NONE] = 0;

With cosmetics fixed:

Reviewed-by: Maxime Coquelin <maxime.coquelin at redhat.com>

Thanks,
Maxime