[Bug 1209] vmxnet3 interface not receiving any packets with dpdk-22.11.1
Amiya Mohakud
amohakud at paloaltonetworks.com
Mon Apr 3 11:23:11 CEST 2023
Hi Jochen,
Could you please help here?
Regards
Amiya
On Fri, Mar 31, 2023 at 1:10 PM David Marchand <david.marchand at redhat.com>
wrote:
> Hello Jochen,
>
> On Fri, Mar 31, 2023 at 9:07 AM <bugzilla at dpdk.org> wrote:
> >
> > Bug ID 1209
> > Summary vmxnet3 interface not receiving any packets with dpdk-22.11.1
> > Product DPDK
> > Version 22.11
> > Hardware x86
> > OS All
> > Status UNCONFIRMED
> > Severity critical
> > Priority Normal
> > Component ethdev
> > Assignee dev at dpdk.org
> > Reporter amohakud at paloaltonetworks.com
> > Target Milestone ---
> >
> > Hi,
> > I recently upgraded our DPDK to 22.11.1 and observed that the guest
> vmxnet3
> > interface is not receiving any unicast packets. It's able to receive the
> > broadcast packets though. We enable promiscuous and all-multicast on the
> port.
> >
> > rte_eth_promiscuous_enable(port);
> > rte_eth_allmulticast_enable(port);
> >
> > This happens when the vswitch has only 2 ports attached.
> >
> > On further triaging,
> > - I could find out that on the same setup, dpdk-20.11 works fine.
> > - Upon comparing the working scenario and non-working scenario on esx
> host, I
> > could notice that there is some difference in port configuration of
> vswitch.
> >
> > Below is the snapshot of working case, where the ethFRP:frame routing {
> > requested:filter flags is 0x1d.
> >
> > port {
> > port index:365
> > vnic index:0x00000003
> > portCfg:build_1_15_2_vm-v3--p1e3-u2e3
> > dvPortId:
> > clientName:sjc-cms-esx15-csm02-pan1
> > clientType: 5 -> VMM Virtual NIC
> > clientSubType: 9 -> Vmxnet3 Client
> > world leader:2120158
> > flags: 0x40013 -> IN_USE ENABLED WORLD_ASSOC CONNECTED
> > Impl customized blocked flags:0x00000000
> > Passthru status: 0x8 -> DISABLED_BY_HOST
> > fixed Hw Id:00:50:56:b8:20:aa:
> > ethFRP:frame routing {
> > requested:filter {
> > flags:0x0000001d
> > unicastAddr:00:50:56:b8:20:aa:
> > numMulticastAddresses:0
> > multicastAddresses:
> > LADRF:[0]: 0x0
> > [1]: 0x0
> > }
> > accepted:filter {
> > flags:0x0000001d
> > unicastAddr:00:50:56:b8:20:aa:
> > numMulticastAddresses:0
> > multicastAddresses:
> > LADRF:[0]: 0x0
> > [1]: 0x0
> > }
> > }
> >
> >
> > For the non-working case the flag is set to 0x09.
> >
> > port {
> > port index:365
> > vnic index:0x00000003
> > portCfg:build_1_15_2_vm-v3--p1e3-u2e3
> > dvPortId:
> > clientName:sjc-cms-esx15-csm02-pan1
> > clientType: 5 -> VMM Virtual NIC
> > clientSubType: 9 -> Vmxnet3 Client
> > world leader:2120158
> > flags: 0x40013 -> IN_USE ENABLED WORLD_ASSOC CONNECTED
> > Impl customized blocked flags:0x00000000
> > Passthru status: 0x8 -> DISABLED_BY_HOST
> > fixed Hw Id:00:50:56:b8:20:aa:
> > ethFRP:frame routing {
> > requested:filter {
> > flags:0x00000009
> > unicastAddr:00:50:56:b8:20:aa:
> > numMulticastAddresses:0
> > multicastAddresses:
> > LADRF:[0]: 0x0
> > [1]: 0x0
> > }
> > accepted:filter {
> > flags:0x00000009
> > unicastAddr:00:50:56:b8:20:aa:
> > numMulticastAddresses:0
> > multicastAddresses:
> > LADRF:[0]: 0x0
> > [1]: 0x0
> > }
> > }
> > filter supported features: 0 -> NONE
> > filter properties: 0 -> NONE
> > rx mode: 0 -> INLINE
> > tune mode: 0 -> default
> > fastpath switch ID:0xffffffff
> > fastpath port ID:0xffffffff
> > }
> >
> > I think these are some of the flags set by vmxnet3 device and in
> dpdk-22.11,
> > its not updating the flags.
>
> As a maintainer of the net/vmxnet3 driver, could you please register
> to bugzilla?
> And please have a look.
>
>
> Thanks!
>
> --
> David marchand
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mails.dpdk.org/archives/dev/attachments/20230403/ecf9807e/attachment-0001.htm>
More information about the dev
mailing list