[PATCH v6] app/testpmd: expand noisy neighbour forward mode support
Ferruh Yigit
ferruh.yigit at amd.com
Thu Jun 8 12:25:02 CEST 2023
On 6/8/2023 10:59 AM, Mike Pattrick wrote:
> Previously the noisy neighbour vnf simulation would only operate in io
> mode, forwarding packets as is. However, this limited the usefulness of
> noisy neighbour simulation.
>
> This feature has now been expanded to supporting mac, macswap, and
> 5tswap modes. To facilitate adding this support, some new header files
> were added.
>
> Signed-off-by: Mike Pattrick <mkp at redhat.com>
> ---
> v2: Reverted changes to random memory lookup
> v3: Refactored entire patch
> v4: Implemented recommended formatting changes
> v5: Corrected copyright statement and formatting changes
> v6: Reordered some variables, preserved noisy subtype for display
> ---
> app/test-pmd/5tswap.c | 118 +----------------------
> app/test-pmd/5tswap.h | 130 ++++++++++++++++++++++++++
> app/test-pmd/config.c | 18 +++-
> app/test-pmd/macfwd.c | 33 +------
> app/test-pmd/macfwd.h | 45 +++++++++
> app/test-pmd/noisy_vnf.c | 106 +++++++++++++++++----
> app/test-pmd/parameters.c | 15 +++
> app/test-pmd/testpmd.c | 14 +++
> app/test-pmd/testpmd.h | 10 ++
> doc/guides/testpmd_app_ug/run_app.rst | 9 ++
> 10 files changed, 334 insertions(+), 164 deletions(-)
> create mode 100644 app/test-pmd/5tswap.h
> create mode 100644 app/test-pmd/macfwd.h
>
<...>
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index 096c218c12..a3e2c2ac15 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -4052,9 +4052,16 @@ rxtx_config_display(void)
> {
> portid_t pid;
> queueid_t qid;
> + char buf[32];
> +
> + if (cur_fwd_eng == &noisy_vnf_engine)
> + snprintf(buf, sizeof(buf), " (%s)", noisy_fwd_mode_desc[noisy_fwd_mode]);
> + else
> + buf[0] = '\0';
>
> - printf(" %s packet forwarding%s packets/burst=%d\n",
> + printf(" %s%s packet forwarding%s packets/burst=%d\n",
> cur_fwd_eng->fwd_mode_name,
> + buf,
> retry_enabled == 0 ? "" : " with retry",
> nb_pkt_per_burst);
>
> @@ -4816,10 +4823,17 @@ pkt_fwd_config_display(struct fwd_config *cfg)
> struct fwd_stream *fs;
> lcoreid_t lc_id;
> streamid_t sm_id;
> + char buf[32];
> +
> + if (cfg->fwd_eng == &noisy_vnf_engine)
> + snprintf(buf, sizeof(buf), " (%s)", noisy_fwd_mode_desc[noisy_fwd_mode]);
> + else
> + buf[0] = '\0';
>
> - printf("%s packet forwarding%s - ports=%d - cores=%d - streams=%d - "
> + printf("%s%s packet forwarding%s - ports=%d - cores=%d - streams=%d - "
> "NUMA support %s, MP allocation mode: %s\n",
> cfg->fwd_eng->fwd_mode_name,
> + buf,
> retry_enabled == 0 ? "" : " with retry",
> cfg->nb_fwd_ports, cfg->nb_fwd_lcores, cfg->nb_fwd_streams,
> numa_support == 1 ? "enabled" : "disabled",
This works but I wonder if we can keep the display functions generic (as
much as possible), without forwarding enginee specific checks.
What about the idea to update '.fwd_mode_name' in 'noisy_fwd_begin()'?
That way generic display code can stay as it is.
<...>
> +static bool
> +pkt_burst_mac(struct fwd_stream *fs)
> +{
> + struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
> + uint16_t nb_rx;
> + uint16_t nb_tx;
> +
> + nb_rx = common_fwd_stream_receive(fs, pkts_burst, nb_pkt_per_burst);
> + if (likely(nb_rx != 0))
> + do_macfwd(pkts_burst, nb_rx, fs);
> + nb_tx = noisy_eth_tx_burst(fs, nb_rx, pkts_burst);
> +
> + return nb_rx > 0 || nb_tx > 0;
> +}
> +static bool
> +pkt_burst_macswap(struct fwd_stream *fs)
> +{
> + struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
> + uint16_t nb_rx;
> + uint16_t nb_tx;
> +
> + nb_rx = common_fwd_stream_receive(fs, pkts_burst, nb_pkt_per_burst);
> + if (likely(nb_rx != 0))
> + do_macswap(pkts_burst, nb_rx, &ports[fs->tx_port]);
> + nb_tx = noisy_eth_tx_burst(fs, nb_rx, pkts_burst);
> +
> + return nb_rx > 0 || nb_tx > 0;
> +}
> +static bool
> +pkt_burst_5tswap(struct fwd_stream *fs)
> +{
> + struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
> + uint16_t nb_rx;
> + uint16_t nb_tx;
> +
> + nb_rx = common_fwd_stream_receive(fs, pkts_burst, nb_pkt_per_burst);
> + if (likely(nb_rx != 0))
> + do_5tswap(pkts_burst, nb_rx, fs);
> + nb_tx = noisy_eth_tx_burst(fs, nb_rx, pkts_burst);
> +
> + return nb_rx > 0 || nb_tx > 0;
> +}
>
Empty lines are missing between functions.
More information about the dev
mailing list