[PATCH v2 2/2] net/hns3: add FDIR VLAN match mode runtime config
Dongdong Liu
liudongdong3 at huawei.com
Wed Jun 28 04:59:42 CEST 2023
Hi Thomas
Many thanks for your review.
On 2023/6/28 7:12, Thomas Monjalon wrote:
> 27/06/2023 09:11, Dongdong Liu:
>> +- ``fdir_vlan_match_mode`` (default `strict`)
>> +
>> + Used to select VLAN match mode. This runtime config can be `strict`
>> + or `nostrict` and is only valid for PF drives.
>
> drives? Do you mean devices?
for PF devices, will fix.
>
>> + If driver works on `strict` mode (default mode), hardware does strictly
>> + match the input flow base on VLAN number.
>> +
>> + For the following scenarios with two rules:
>> +
>> + .. code-block:: console
>> +
>> + rule0:
>> + pattern: eth type is 0x0806
>> + actions: queue index 3
>> + rule1:
>> + pattern: eth type is 0x0806 / vlan vid is 20
>> + actions: queue index 4
>> +
>> + If application select `strict` mode, only the ARP packets with VLAN
>> + 20 are directed to queue 4, and the ARP packets with other VLAN ID
>> + cannot be directed to the specified queue. If application want to all
>> + ARP packets with or without VLAN to be directed to the specified queue,
>> + application can select `nostrict` mode and just need to set rule0.
>
> As it is done in the rest of the document, you should use double backquotes
> for values of the devargs.
Good point, will fix.
Thanks,
Dongdong.
>
>
>
> .
>
More information about the dev
mailing list