[PATCH v7 07/21] dts: dts runner and main docstring update
Jeremy Spewock
jspewock at iol.unh.edu
Thu Nov 16 22:51:42 CET 2023
On Wed, Nov 15, 2023 at 8:11 AM Juraj Linkeš <juraj.linkes at pantheon.tech>
wrote:
> Format according to the Google format and PEP257, with slight
> deviations.
>
> Signed-off-by: Juraj Linkeš <juraj.linkes at pantheon.tech>
> ---
> dts/framework/dts.py | 128 ++++++++++++++++++++++++++++++++++++-------
> dts/main.py | 8 ++-
> 2 files changed, 112 insertions(+), 24 deletions(-)
>
> diff --git a/dts/framework/dts.py b/dts/framework/dts.py
> index 4c7fb0c40a..331fed7dc4 100644
> --- a/dts/framework/dts.py
> +++ b/dts/framework/dts.py
> @@ -3,6 +3,33 @@
> # Copyright(c) 2022-2023 PANTHEON.tech s.r.o.
> # Copyright(c) 2022-2023 University of New Hampshire
>
> +r"""Test suite runner module.
> +
> +A DTS run is split into stages:
> +
> + #. Execution stage,
> + #. Build target stage,
> + #. Test suite stage,
> + #. Test case stage.
> +
> +The module is responsible for running tests on testbeds defined in the
> test run configuration.
> +Each setup or teardown of each stage is recorded in a
> :class:`~framework.test_result.DTSResult` or
> +one of its subclasses. The test case results are also recorded.
> +
> +If an error occurs, the current stage is aborted, the error is recorded
> and the run continues in
> +the next iteration of the same stage. The return code is the highest
> `severity` of all
> +:class:`~.framework.exception.DTSError`\s.
> +
> +Example:
> + An error occurs in a build target setup. The current build target is
> aborted and the run
> + continues with the next build target. If the errored build target was
> the last one in the given
> + execution, the next execution begins.
> +
> +Attributes:
> + dts_logger: The logger instance used in this module.
> + result: The top level result used in the module.
> +"""
> +
> import sys
>
> from .config import (
> @@ -23,9 +50,38 @@
>
>
> def run_all() -> None:
> - """
> - The main process of DTS. Runs all build targets in all executions
> from the main
> - config file.
> + """Run all build targets in all executions from the test run
> configuration.
> +
> + Before running test suites, executions and build targets are first
> set up.
> + The executions and build targets defined in the test run
> configuration are iterated over.
> + The executions define which tests to run and where to run them and
> build targets define
> + the DPDK build setup.
> +
> + The tests suites are set up for each execution/build target tuple and
> each scheduled
> + test case within the test suite is set up, executed and torn down.
> After all test cases
> + have been executed, the test suite is torn down and the next build
> target will be tested.
> +
> + All the nested steps look like this:
> +
> + #. Execution setup
> +
> + #. Build target setup
> +
> + #. Test suite setup
> +
> + #. Test case setup
> + #. Test case logic
> + #. Test case teardown
> +
> + #. Test suite teardown
> +
> + #. Build target teardown
> +
> + #. Execution teardown
> +
> + The test cases are filtered according to the specification in the
> test run configuration and
> + the :option:`--test-cases` command line argument or
> + the :envvar:`DTS_TESTCASES` environment variable.
> """
> global dts_logger
> global result
> @@ -87,6 +143,8 @@ def run_all() -> None:
>
>
> def _check_dts_python_version() -> None:
> + """Check the required Python version - v3.10."""
> +
> def RED(text: str) -> str:
> return f"\u001B[31;1m{str(text)}\u001B[0m"
>
> @@ -111,9 +169,16 @@ def _run_execution(
> execution: ExecutionConfiguration,
> result: DTSResult,
> ) -> None:
> - """
> - Run the given execution. This involves running the execution setup as
> well as
> - running all build targets in the given execution.
> + """Run the given execution.
> +
> + This involves running the execution setup as well as running all
> build targets
> + in the given execution. After that, execution teardown is run.
> +
> + Args:
> + sut_node: The execution's SUT node.
> + tg_node: The execution's TG node.
> + execution: An execution's test run configuration.
> + result: The top level result object.
> """
> dts_logger.info(
> f"Running execution with SUT '{
> execution.system_under_test_node.name}'."
> @@ -150,8 +215,18 @@ def _run_build_target(
> execution: ExecutionConfiguration,
> execution_result: ExecutionResult,
> ) -> None:
> - """
> - Run the given build target.
> + """Run the given build target.
> +
> + This involves running the build target setup as well as running all
> test suites
> + in the given execution the build target is defined in.
> + After that, build target teardown is run.
> +
> + Args:
> + sut_node: The execution's SUT node.
> + tg_node: The execution's TG node.
> + build_target: A build target's test run configuration.
> + execution: The build target's execution's test run configuration.
> + execution_result: The execution level result object associated
> with the execution.
> """
> dts_logger.info(f"Running build target '{build_target.name}'.")
> build_target_result = execution_result.add_build_target(build_target)
> @@ -183,10 +258,17 @@ def _run_all_suites(
> execution: ExecutionConfiguration,
> build_target_result: BuildTargetResult,
> ) -> None:
> - """
> - Use the given build_target to run execution's test suites
> - with possibly only a subset of test cases.
> - If no subset is specified, run all test cases.
> + """Run the execution's (possibly a subset) test suites using the
> current build_target.
> +
> + The function assumes the build target we're testing has already been
> built on the SUT node.
> + The current build target thus corresponds to the current DPDK build
> present on the SUT node.
> +
> + Args:
> + sut_node: The execution's SUT node.
> + tg_node: The execution's TG node.
> + execution: The execution's test run configuration associated with
> the current build target.
> + build_target_result: The build target level result object
> associated
> + with the current build target.
> """
>
Is it worth mentioning in this method or the _run_build_target method that
when a blocking suite fails that no more suites will be run on that build
target?
> end_build_target = False
> if not execution.skip_smoke_tests:
> @@ -215,16 +297,22 @@ def _run_single_suite(
> build_target_result: BuildTargetResult,
> test_suite_config: TestSuiteConfig,
> ) -> None:
> - """Runs a single test suite.
> + """Run all test suite in a single test suite module.
> +
> + The function assumes the build target we're testing has already been
> built on the SUT node.
> + The current build target thus corresponds to the current DPDK build
> present on the SUT node.
>
> Args:
> - sut_node: Node to run tests on.
> - execution: Execution the test case belongs to.
> - build_target_result: Build target configuration test case is run
> on
> - test_suite_config: Test suite configuration
> + sut_node: The execution's SUT node.
> + tg_node: The execution's TG node.
> + execution: The execution's test run configuration associated with
> the current build target.
> + build_target_result: The build target level result object
> associated
> + with the current build target.
> + test_suite_config: Test suite test run configuration specifying
> the test suite module
> + and possibly a subset of test cases of test suites in that
> module.
>
> Raises:
> - BlockingTestSuiteError: If a test suite that was marked as
> blocking fails.
> + BlockingTestSuiteError: If a blocking test suite fails.
> """
> try:
> full_suite_path =
> f"tests.TestSuite_{test_suite_config.test_suite}"
> @@ -248,9 +336,7 @@ def _run_single_suite(
>
>
> def _exit_dts() -> None:
> - """
> - Process all errors and exit with the proper exit code.
> - """
> + """Process all errors and exit with the proper exit code."""
> result.process()
>
> if dts_logger:
> diff --git a/dts/main.py b/dts/main.py
> index 5d4714b0c3..f703615d11 100755
> --- a/dts/main.py
> +++ b/dts/main.py
> @@ -4,9 +4,7 @@
> # Copyright(c) 2022 PANTHEON.tech s.r.o.
> # Copyright(c) 2022 University of New Hampshire
>
> -"""
> -A test framework for testing DPDK.
> -"""
> +"""The DTS executable."""
>
> import logging
>
> @@ -17,6 +15,10 @@ def main() -> None:
> """Set DTS settings, then run DTS.
>
> The DTS settings are taken from the command line arguments and the
> environment variables.
> + The settings object is stored in the module-level variable
> settings.SETTINGS which the entire
> + framework uses. After importing the module (or the variable), any
> changes to the variable are
> + not going to be reflected without a re-import. This means that the
> SETTINGS variable must
> + be modified before the settings module is imported anywhere else in
> the framework.
> """
> settings.SETTINGS = settings.get_settings()
> from framework import dts
> --
> 2.34.1
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mails.dpdk.org/archives/dev/attachments/20231116/25b73b90/attachment-0001.htm>
More information about the dev
mailing list