[PATCH v6 2/8] net/rnp: add ethdev probe and remove

[Ferruh Yigit]

On 9/1/2023 3:30 AM, Wenbo Cao wrote:
> Add basic PCIe ethdev probe and remove.
> 
> Signed-off-by: Wenbo Cao <caowenbo at mucse.com>
> ---
>  drivers/net/rnp/rnp.h        | 13 ++++++
>  drivers/net/rnp/rnp_ethdev.c | 83 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 96 insertions(+)
>  create mode 100644 drivers/net/rnp/rnp.h
> 
> diff --git a/drivers/net/rnp/rnp.h b/drivers/net/rnp/rnp.h
> new file mode 100644
> index 0000000000..76d281cc0a
> --- /dev/null
> +++ b/drivers/net/rnp/rnp.h
> @@ -0,0 +1,13 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(C) 2023 Mucse IC Design Ltd.
> + */
> +#ifndef __RNP_H__
> +#define __RNP_H__
> +
> +#define PCI_VENDOR_ID_MUCSE	(0x8848)
> +#define RNP_DEV_ID_N10G		(0x1000)
> +
> +struct rnp_eth_port {
> +} __rte_cache_aligned;
> +

Is the struct needs to be cache aligned?

> +#endif /* __RNP_H__ */
> diff --git a/drivers/net/rnp/rnp_ethdev.c b/drivers/net/rnp/rnp_ethdev.c
> index 9ce3c0b497..390f2e7743 100644
> --- a/drivers/net/rnp/rnp_ethdev.c
> +++ b/drivers/net/rnp/rnp_ethdev.c
> @@ -1,3 +1,86 @@
>  /* SPDX-License-Identifier: BSD-3-Clause
>   * Copyright(C) 2023 Mucse IC Design Ltd.
>   */
> +
> +#include <ethdev_pci.h>
> +#include <rte_io.h>
> +#include <rte_malloc.h>
> +
> +#include "rnp.h"
> +
> +static int
> +rnp_eth_dev_init(struct rte_eth_dev *eth_dev)
> +{
> +	RTE_SET_USED(eth_dev);
> +
> +	return -ENODEV;
> +}
> +
> +static int
> +rnp_eth_dev_uninit(struct rte_eth_dev *eth_dev)
> +{
> +	RTE_SET_USED(eth_dev);
> +
> +	return -ENODEV;
> +}
> +
> +static int
> +rnp_pci_remove(struct rte_pci_device *pci_dev)
> +{
> +	struct rte_eth_dev *eth_dev;
> +	int rc;
> +
> +	eth_dev = rte_eth_dev_allocated(pci_dev->device.name);
> +
> +	if (eth_dev) {
> +		/* Cleanup eth dev */
> +		rc = rte_eth_dev_pci_generic_remove(pci_dev,
> +				rnp_eth_dev_uninit);
> +		if (rc)
> +			return rc;
> +	}
> +	/* Nothing to be done for secondary processes */
> +	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
> +		return 0;
> +

Primary also don't do anything after this stage, I suggest adding this
code when primary & secondary diverges.

> +	return 0;
> +}
> +
> +static int
> +rnp_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
> +{
> +	int rc;
> +
> +	RTE_SET_USED(pci_drv);
> +
> +	rc = rte_eth_dev_pci_generic_probe(pci_dev, sizeof(struct rnp_eth_port),
> +					   rnp_eth_dev_init);
> +
> +	/* On error on secondary, recheck if port exists in primary or
> +	 * in mid of detach state.
> +	 */
> +	if (rte_eal_process_type() != RTE_PROC_PRIMARY && rc)
> +		if (!rte_eth_dev_allocated(pci_dev->device.name))
> +			return 0;

Why this additional secondary check is required?
'rte_eth_dev_pci_generic_probe()' should be dealing with
primary/secondary process case.