[PATCH v6 3/8] net/rnp: add device init and uninit

[Ferruh Yigit]

On 9/1/2023 3:30 AM, Wenbo Cao wrote:
> Add basic init and uninit function
> 
> Signed-off-by: Wenbo Cao <caowenbo at mucse.com>
> ---
>  drivers/net/rnp/base/rnp_hw.h |  19 ++++
>  drivers/net/rnp/meson.build   |   1 +
>  drivers/net/rnp/rnp.h         |  25 +++++
>  drivers/net/rnp/rnp_ethdev.c  | 196 +++++++++++++++++++++++++++++++++-
>  drivers/net/rnp/rnp_logs.h    |  34 ++++++
>  drivers/net/rnp/rnp_osdep.h   |  30 ++++++
>  6 files changed, 300 insertions(+), 5 deletions(-)
>  create mode 100644 drivers/net/rnp/base/rnp_hw.h
>  create mode 100644 drivers/net/rnp/rnp_logs.h
>  create mode 100644 drivers/net/rnp/rnp_osdep.h
> 

'rnp_osdep.h' not used at all in the patch, can you move it where it is
used?

> diff --git a/drivers/net/rnp/base/rnp_hw.h b/drivers/net/rnp/base/rnp_hw.h
> new file mode 100644
> index 0000000000..d80d23f4b4
> --- /dev/null
> +++ b/drivers/net/rnp/base/rnp_hw.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(C) 2023 Mucse IC Design Ltd.
> + */
> +#ifndef __RNP_HW_H__
> +#define __RNP_HW_H__
> +
> +struct rnp_eth_adapter;
> +struct rnp_hw {
> +	struct rnp_eth_adapter *back;
> +	void *iobar0;
> +	uint32_t iobar0_len;
> +	void *iobar4;
> +	uint32_t iobar4_len;
> +
> +	uint16_t device_id;
> +	uint16_t vendor_id;
> +} __rte_cache_aligned;
> +

All structs seems alligned to the cache, although it may not hurt, it is
better to align ones that is necessary for performance.

<...>

> +
> +static struct rte_eth_dev *
> +rnp_alloc_eth_port(struct rte_pci_device *primary_pci, char *name)

Why variable name is 'primary_pci', are there different pci device types?

> +{
> +	struct rnp_eth_port *port;
> +	struct rte_eth_dev *eth_dev;
> +
> +	eth_dev = rte_eth_dev_allocate(name);
> +	if (!eth_dev) {
> +		RNP_PMD_DRV_LOG(ERR, "Could not allocate "
> +				"eth_dev for %s\n", name);

Please don't split the log message, instead can do:
RNP_PMD_DRV_LOG(ERR,
	"Could not allocate eth_dev for %s\n",
	name);

Same for all log messages.

> +		return NULL;
> +	}
> +	port = rte_zmalloc_socket(name,
> +			sizeof(*port),
> +			RTE_CACHE_LINE_SIZE,
> +			primary_pci->device.numa_node);
> +	if (!port) {
> +		RNP_PMD_DRV_LOG(ERR, "Could not allocate "
> +				"rnp_eth_port for %s\n", name);
> +		return NULL;

Should 'eth_dev' released here?

> +	}
> +	eth_dev->data->dev_private = port;
> +	eth_dev->process_private = calloc(1, sizeof(struct rnp_share_ops));
> +	if (!eth_dev->process_private) {
> +		RNP_PMD_DRV_LOG(ERR, "Could not calloc "
> +				"for Process_priv\n");
> +		goto fail_calloc;
> +	}
> +	return eth_dev;
> +fail_calloc:
> +	rte_free(port);
> +	rte_eth_dev_release_port(eth_dev);
> +
> +	return NULL;
> +}
> +
> +static int
> +rnp_eth_dev_init(struct rte_eth_dev *dev)
> +{
> +	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> +	struct rnp_eth_adapter *adapter = NULL;
> +	char name[RTE_ETH_NAME_MAX_LEN] = " ";
> +	struct rnp_eth_port *port = NULL;
> +	struct rte_eth_dev *eth_dev;
> +	struct rnp_hw *hw = NULL;
> +	int32_t p_id;
> +	int ret;
> +
> +	PMD_INIT_FUNC_TRACE();
> +
> +	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
> +		return 0;
> +	memset(name, 0, sizeof(name));
> +	snprintf(name, sizeof(name), "rnp_adapter_%d", dev->data->port_id);
> +	adapter = rte_zmalloc(name, sizeof(struct rnp_eth_adapter), 0);
> +	if (!adapter) {
> +		RNP_PMD_DRV_LOG(ERR, "zmalloc for adapter failed\n");
> +		return -ENOMEM;
> +	}
> +	hw = &adapter->hw;
> +	adapter->pdev = pci_dev;
> +	adapter->eth_dev = dev;
> +	adapter->num_ports = 1;

This is hardcoded value, so no need the loop below but perhaps it is for
future.

> +	hw->back = adapter;
> +	hw->iobar4 = pci_dev->mem_resource[RNP_CFG_BAR].addr;
> +	hw->iobar0 = pci_dev->mem_resource[RNP_PF_INFO_BAR].addr;
> +	hw->iobar4_len = pci_dev->mem_resource[RNP_CFG_BAR].len;
> +	hw->iobar0_len = pci_dev->mem_resource[RNP_PF_INFO_BAR].len;
> +	hw->device_id = pci_dev->id.device_id;
> +	hw->vendor_id = pci_dev->id.vendor_id;
> +	hw->device_id = pci_dev->id.device_id;
> +	for (p_id = 0; p_id < adapter->num_ports; p_id++) {
> +		/* port 0 resource has been allocated When Probe */

Why 'When' & 'Probe' starts with uppercase, similar usage exists many
places, although that is not an issue, just catches eye, can you please
fix them if there is no specific reason.

> +		if (!p_id) {
> +			eth_dev = dev;
> +		} else {
> +			snprintf(name, sizeof(name), "%s_%d",
> +					adapter->pdev->device.name,
> +					p_id);
> +			eth_dev = rnp_alloc_eth_port(pci_dev, name);
> +			if (eth_dev)
> +				rte_memcpy(eth_dev->process_private,
> +						adapter->share_priv,
> +						sizeof(*adapter->share_priv));
> +			if (!eth_dev) {

This can be 'else' leg of above branch.

> +				ret = -ENOMEM;
> +				goto eth_alloc_error;
> +			}
> +		}
> +		ret = rnp_init_port_resource(adapter, eth_dev, name, p_id);
> +		if (ret)
> +			goto eth_alloc_error;

'rnp_init_port_resource()' can't return error but perhaps this check is
for future.

> +
> +		rnp_mac_rx_disable(eth_dev);
> +		rnp_mac_tx_disable(eth_dev);
> +	}
> +
> +	return 0;
> +eth_alloc_error:
> +	for (p_id = 0; p_id < adapter->num_ports; p_id++) {
> +		port = adapter->ports[p_id];
> +		if (!port)
> +			continue;
> +		if (port->eth_dev) {
> +			rnp_dev_close(port->eth_dev);
> +			rte_eth_dev_release_port(port->eth_dev);
> +			if (port->eth_dev->process_private)

This should crash, because 'port' is 'dev_private' and
'rte_eth_dev_release_port()' frees the dev_private, so can't access
'port->' here.

Also 'process_private' set to NULL in the 'rte_eth_dev_release_port()',
it should be freed in 'rnp_dev_close()', not here.

> +				free(port->eth_dev->process_private);
> +		}
> +		rte_free(port);
> +	}
> +	rte_free(adapter);
> +
> +	return 0;
>  }
>  
>  static int
>  rnp_eth_dev_uninit(struct rte_eth_dev *eth_dev)
>  {
> -	RTE_SET_USED(eth_dev);
> +	struct rnp_eth_adapter *adapter = RNP_DEV_TO_ADAPTER(eth_dev);
> +	struct rnp_eth_port *port = NULL;
> +	uint8_t p_id;
> +
> +	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
> +		return 0;
>  
> -	return -ENODEV;
> +	if (adapter->eth_dev != eth_dev) {
> +		RNP_PMD_DRV_LOG(ERR, "Input Argument ethdev "
> +			       "Isn't Primary Ethdev\n");
> +		return -EINVAL;
> +	}
> +	for (p_id = 0; p_id < adapter->num_ports; p_id++) {
> +		port = adapter->ports[p_id];
> +		if (!port)
> +			continue;
> +		if (port->eth_dev) {
> +			rnp_dev_close(port->eth_dev);
> +			/* Just Release Not Primary Port Allocated By PMD */
> +			if (p_id)
> +				rte_eth_dev_release_port(port->eth_dev);
> +		}
> +	}
> +
> +	return 0;
>  }
>  
>  static int
> @@ -84,3 +259,14 @@ static struct rte_pci_driver rte_rnp_pmd = {
>  RTE_PMD_REGISTER_PCI(net_rnp, rte_rnp_pmd);
>  RTE_PMD_REGISTER_PCI_TABLE(net_rnp, pci_id_rnp_map);
>  RTE_PMD_REGISTER_KMOD_DEP(net_rnp, "igb_uio | uio_pci_generic | vfio-pci");
> +
> +RTE_LOG_REGISTER_SUFFIX(rnp_init_logtype, init, NOTICE);
> +RTE_LOG_REGISTER_SUFFIX(rnp_drv_logtype, driver, NOTICE);
> +

Do you really need two different log types? What about reducing it to one?

<...>

> diff --git a/drivers/net/rnp/rnp_osdep.h b/drivers/net/rnp/rnp_osdep.h
> new file mode 100644
> index 0000000000..5685dd2404
> --- /dev/null
> +++ b/drivers/net/rnp/rnp_osdep.h
> @@ -0,0 +1,30 @@
> +#ifndef __RNP_OSDEP_H__
> +#define __RNP_OSDEP_H__
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(C) 2023 Mucse IC Design Ltd.
> + */
> +#include <stdint.h>
> +
> +#include <rte_byteorder.h>
> +
> +#define __iomem
> +#define _RING_(off)     ((off) + 0x000000)
> +#define _DMA_(off)      ((off))
> +#define _GLB_(off)      ((off) + 0x000000)
> +#define _NIC_(off)      ((off) + 0x000000)
> +#define _ETH_(off)      ((off))
> +#define _MAC_(off)      ((off))
> +#define BIT(n)          (1UL << (n))
> +#define BIT64(n)        (1ULL << (n))

DPDK has RTE_BIT64 / RTE_BIT32 macros that can be reused.

> +#define BITS_PER_LONG   (__SIZEOF_LONG__ * 8)
> +#define GENMASK(h, l) \
> +	(((~0UL) << (l)) & (~0UL >> (BITS_PER_LONG - 1 - (h))))
> +
> +typedef uint8_t     u8;
> +typedef uint16_t    u16;
> +typedef uint32_t    u32;
> +typedef uint64_t    u64;
> +typedef int32_t     s32;
> +typedef int16_t     s16;
> +typedef int8_t      s8;
> +#endif /* __RNP_OSDEP_H__ */