Hi Gagan,
On 06-08-2024 14:11, Gagandeep Singh wrote:
> From: Jun Yang <jun.yang at nxp.com>
>
> Output debug information according to various modes.
>
> Signed-off-by: Jun Yang <jun.yang at nxp.com>
> ---
> drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 63 ++++++++++++++++-----
> 1 file changed, 48 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
> index 1e28c71b53..da3bd871ba 100644
> --- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
> +++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
> @@ -1095,7 +1095,7 @@ build_auth_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
>
> static int
> build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
> - struct qbman_fd *fd, __rte_unused uint16_t bpid)
> + struct qbman_fd *fd, uint16_t bpid)
> {
> struct rte_crypto_sym_op *sym_op = op->sym;
> struct qbman_fle *ip_fle, *op_fle, *sge, *fle;
> @@ -1105,6 +1105,10 @@ build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
> struct rte_mbuf *mbuf;
> uint8_t *iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
> sess->iv.offset);
> +#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
> + char debug_str[1024];
> + int offset;
> +#endif
>
> data_len = sym_op->cipher.data.length;
> data_offset = sym_op->cipher.data.offset;
> @@ -1210,14 +1214,26 @@ build_cipher_sg_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
> DPAA2_SET_FD_COMPOUND_FMT(fd);
> DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
>
> - DPAA2_SEC_DP_DEBUG(
> - "CIPHER SG: fdaddr =%" PRIx64 " bpid =%d meta =%d"
> - " off =%d, len =%d\n",
> +#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
> + offset = sprintf(debug_str,
> + "CIPHER SG: fdaddr =%" PRIx64 ", from %s pool ",
> DPAA2_GET_FD_ADDR(fd),
> - DPAA2_GET_FD_BPID(fd),
> - rte_dpaa2_bpid_info[bpid].meta_data_size,
> - DPAA2_GET_FD_OFFSET(fd),
> - DPAA2_GET_FD_LEN(fd));
> + bpid < MAX_BPID ? "SW" : "BMAN");
> + if (bpid < MAX_BPID) {
> + offset += sprintf(&debug_str[offset],
> + "bpid = %d ", bpid);
> + }
> + offset += sprintf(&debug_str[offset],
> + "private size = %d ",
> + mbuf->pool->private_data_size);
> + offset += sprintf(&debug_str[offset],
> + "off =%d, len =%d\n",
> + DPAA2_GET_FD_OFFSET(fd), DPAA2_GET_FD_LEN(fd));
> + DPAA2_SEC_DP_DEBUG("%s", debug_str);
> +#else
> + RTE_SET_USED(bpid);
> +#endif
> +
> return 0;
> }
>
> @@ -1233,6 +1249,10 @@ build_cipher_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
> uint8_t *iv_ptr = rte_crypto_op_ctod_offset(op, uint8_t *,
> sess->iv.offset);
> struct rte_mbuf *dst;
> +#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
> + char debug_str[1024];
> + int offset;
> +#endif
>
> data_len = sym_op->cipher.data.length;
> data_offset = sym_op->cipher.data.offset;
> @@ -1324,14 +1344,23 @@ build_cipher_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
> DPAA2_SET_FLE_FIN(sge);
> DPAA2_SET_FLE_FIN(fle);
>
> - DPAA2_SEC_DP_DEBUG(
> - "CIPHER: fdaddr =%" PRIx64 " bpid =%d meta =%d"
> - " off =%d, len =%d\n",
> +#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
> + offset = sprintf(debug_str,
> + "CIPHER: fdaddr =%" PRIx64 ", from %s pool ",
> DPAA2_GET_FD_ADDR(fd),
> - DPAA2_GET_FD_BPID(fd),
> - rte_dpaa2_bpid_info[bpid].meta_data_size,
> - DPAA2_GET_FD_OFFSET(fd),
> - DPAA2_GET_FD_LEN(fd));
> + bpid < MAX_BPID ? "SW" : "BMAN");
> + if (bpid < MAX_BPID) {
> + offset += sprintf(&debug_str[offset],
> + "bpid = %d ", bpid);
> + }
> + offset += sprintf(&debug_str[offset],
> + "private size = %d ",
> + dst->pool->private_data_size);
> + offset += sprintf(&debug_str[offset],
> + "off =%d, len =%d\n",
> + DPAA2_GET_FD_OFFSET(fd), DPAA2_GET_FD_LEN(fd));
> + DPAA2_SEC_DP_DEBUG("%s", debug_str);
> +#endif
>
> return 0;
> }
> @@ -1564,6 +1593,10 @@ sec_fd_to_mbuf(const struct qbman_fd *fd, struct dpaa2_sec_qp *qp)
> struct qbman_fle *fle;
> struct rte_crypto_op *op;
> struct rte_mbuf *dst, *src;
> +#if (RTE_LOG_DEBUG <= RTE_LOG_DP_LEVEL)
> + char debug_str[1024];
> + int offset;
> +#endif
you have defined these variables but not used? have you missed
something in this patch?
>
> if (DPAA2_FD_GET_FORMAT(fd) == qbman_fd_single)
> return sec_simple_fd_to_mbuf(fd);