[PATCH v5 04/11] net/mlx5: add default miss action support in nt2hws mode

[Maayan Kashani]

From: Bing Zhao <bingz at nvidia.com>

The validation will be handled later.

Now it only supports the SEND_TO_KERNEL on non-root tables.

Signed-off-by: Bing Zhao <bingz at nvidia.com>
Acked-by: Dariusz Sosnowski <dsosnowski at nvidia.com>
---
 drivers/net/mlx5/mlx5_flow_hw.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow_hw.c b/drivers/net/mlx5/mlx5_flow_hw.c
index 1676579a0c..b8f8c70c42 100644
--- a/drivers/net/mlx5/mlx5_flow_hw.c
+++ b/drivers/net/mlx5/mlx5_flow_hw.c
@@ -12721,22 +12721,28 @@ flow_hw_translate_actions(struct rte_eth_dev *dev,
 	enum mlx5_hw_action_flag_type flag_type;
 	bool actions_end = false;
 	uint64_t action_flags = 0; /* to be used when needed */
+	int ret;
 	uint32_t actions_n = 0;
 	uint32_t mark_id;
 	uint32_t jump_group;
+	uint32_t src_group = 0;
 	bool is_mark;
 	struct mlx5_flow_template_table_cfg tbl_cfg;
 	enum mlx5_flow_fate_type fate_type = MLX5_FLOW_FATE_NONE;
 
+	RTE_SET_USED(action_flags);
+	/* The group in the attribute translation was done in advance. */
+	ret = __translate_group(dev, attr, external, attr->group, &src_group, error);
+	if (ret)
+		return ret;
 	if (attr->transfer)
 		type = MLX5DR_TABLE_TYPE_FDB;
 	else if (attr->egress)
 		type = MLX5DR_TABLE_TYPE_NIC_TX;
 	else
 		type = MLX5DR_TABLE_TYPE_NIC_RX;
-	/* The group in the attribute translation was done in advance. */
-	flag_type = (attr->group == 0) ? MLX5_HW_ACTION_FLAG_ROOT :
-					 MLX5_HW_ACTION_FLAG_NONE_ROOT;
+	flag_type = (src_group == 0) ? MLX5_HW_ACTION_FLAG_ROOT :
+				       MLX5_HW_ACTION_FLAG_NONE_ROOT;
 	for (; !actions_end; actions++) {
 		switch (actions->type) {
 		case RTE_FLOW_ACTION_TYPE_VOID:
@@ -12788,6 +12794,17 @@ flow_hw_translate_actions(struct rte_eth_dev *dev,
 			action_flags |= MLX5_FLOW_ACTION_QUEUE;
 			fate_type = MLX5_FLOW_FATE_QUEUE;
 			break;
+		case RTE_FLOW_ACTION_TYPE_SEND_TO_KERNEL:
+			if (src_group == 0) {
+				rte_flow_error_set(error, ENOTSUP,
+						   RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+						   "Send to kernel action on the root table is"
+						   " not supported in HWS mode now.");
+				goto clean_up;
+			}
+			hw_acts->rule_acts[actions_n++].action = priv->hw_send_to_kernel[type];
+			action_flags |= MLX5_FLOW_ACTION_SEND_TO_KERNEL;
+			break;
 		case RTE_FLOW_ACTION_TYPE_END:
 			/*
 			 * Using NULL action right now, maybe a new API can be used
-- 
2.21.0