[PATCH v1 7/9] test/bbdev: check assumptions on fft window

[Maxime Coquelin]

Hi Nicolas,

On 6/20/24 20:11, Chautru, Nicolas wrote:
> Hi Maxime,
> 
>> -----Original Message-----
>> From: Maxime Coquelin <maxime.coquelin at redhat.com>
>> Sent: Wednesday, June 12, 2024 4:11 AM
>> To: Vargas, Hernan <hernan.vargas at intel.com>; dev at dpdk.org;
>> gakhil at marvell.com; trix at redhat.com
>> Cc: Chautru, Nicolas <nicolas.chautru at intel.com>; Zhang, Qi Z
>> <qi.z.zhang at intel.com>
>> Subject: Re: [PATCH v1 7/9] test/bbdev: check assumptions on fft window
>>
>>
>>
>> On 4/22/24 21:07, Hernan Vargas wrote:
>>> Add check for FFT window width.
>>>
>>> Signed-off-by: Hernan Vargas <hernan.vargas at intel.com>
>>> ---
>>>    app/test-bbdev/test_bbdev_perf.c   | 26 ++++++++++++++++++++++----
>>>    app/test-bbdev/test_bbdev_vector.c | 14 ++++++++++++++
>>>    app/test-bbdev/test_bbdev_vector.h |  2 ++
>>>    3 files changed, 38 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/app/test-bbdev/test_bbdev_perf.c
>>> b/app/test-bbdev/test_bbdev_perf.c
>>> index 28d78e73a9c1..57b21730cab2 100644
>>> --- a/app/test-bbdev/test_bbdev_perf.c
>>> +++ b/app/test-bbdev/test_bbdev_perf.c
>>> @@ -106,6 +106,8 @@ static int ldpc_llr_decimals;
>>>    static int ldpc_llr_size;
>>>    /* Keep track of the LDPC decoder device capability flag */
>>>    static uint32_t ldpc_cap_flags;
>>> +/* FFT window width predefined on device and on vector. */ static int
>>> +fft_window_width_dev;
>>>
>>>    /* Represents tested active devices */
>>>    static struct active_device {
>>> @@ -881,6 +883,13 @@ add_bbdev_dev(uint8_t dev_id, struct
>> rte_bbdev_info *info,
>>>    	rte_bbdev_info_get(dev_id, info);
>>>    	if (info->drv.device_status == RTE_BBDEV_DEV_FATAL_ERR)
>>>    		printf("Device Status %s\n",
>>> rte_bbdev_device_status_str(info->drv.device_status));
>>> +	if (info->drv.fft_window_width != NULL)
>>> +		fft_window_width_dev = info->drv.fft_window_width[0];
>>> +	else
>>> +		fft_window_width_dev = 0;
>>> +	if (fft_window_width_dev != 0)
>>> +		printf("  FFT Window0 width %d\n", fft_window_width_dev);
>>
>> Why not print the value systematically?
> 
> It would only be zero if the application was not able to get that information, hence that would be irrelevant.

Ok, please send a V2 addressing my request on patch 2 so that I can
apply the series this week.

Thanks,
Maxime

>>
>>> +
>>>    	nb_queues = RTE_MIN(rte_lcore_count(), info-
>>> drv.max_num_queues);
>>>    	nb_queues = RTE_MIN(nb_queues, (unsigned int) MAX_QUEUES);
>>>
>>> @@ -2583,7 +2592,8 @@ validate_ldpc_enc_op(struct rte_bbdev_enc_op
>> **ops, const uint16_t n,
>>>    }
>>>
>>>    static inline int
>>> -validate_op_fft_chain(struct rte_bbdev_op_data *op, struct
>>> op_data_entries *orig_op)
>>> +validate_op_fft_chain(struct rte_bbdev_op_data *op, struct
>> op_data_entries *orig_op,
>>> +		bool skip_validate_output)
>>>    {
>>>    	struct rte_mbuf *m = op->data;
>>>    	uint8_t i, nb_dst_segments = orig_op->nb_segments; @@ -2613,7
>>> +2623,7 @@ validate_op_fft_chain(struct rte_bbdev_op_data *op, struct
>> op_data_entries *orig
>>>    			abs_delt = delt > 0 ? delt : -delt;
>>>    			error_num += (abs_delt > thres_hold ? 1 : 0);
>>>    		}
>>> -		if (error_num > 0) {
>>> +		if ((error_num > 0) && !skip_validate_output) {
>>>    			rte_memdump(stdout, "Buffer A", ref_out, data_len);
>>>    			rte_memdump(stdout, "Buffer B", op_out, data_len);
>>>    			TEST_ASSERT(error_num == 0,
>>> @@ -2686,16 +2696,24 @@ validate_fft_op(struct rte_bbdev_fft_op **ops,
>> const uint16_t n,
>>>    	int ret;
>>>    	struct op_data_entries *fft_data_orig =
>> &test_vector.entries[DATA_HARD_OUTPUT];
>>>    	struct op_data_entries *fft_pwr_orig =
>>> &test_vector.entries[DATA_SOFT_OUTPUT];
>>> +	bool skip_validate_output = false;
>>> +
>>> +	if ((test_vector.fft_window_width_vec > 0) &&
>>> +			(test_vector.fft_window_width_vec !=
>> fft_window_width_dev)) {
>>> +		printf("The vector FFT width doesn't match with device - skip
>> %d %d\n",
>>> +				test_vector.fft_window_width_vec,
>> fft_window_width_dev);
>>> +		skip_validate_output = true;
>>> +	}
>>>
>>>    	for (i = 0; i < n; ++i) {
>>>    		ret = check_fft_status_and_ordering(ops[i], i, ref_op->status);
>>>    		TEST_ASSERT_SUCCESS(ret, "Checking status and ordering for
>> FFT failed");
>>>    		TEST_ASSERT_SUCCESS(validate_op_fft_chain(
>>> -				&ops[i]->fft.base_output, fft_data_orig),
>>> +				&ops[i]->fft.base_output, fft_data_orig,
>> skip_validate_output),
>>>    				"FFT Output buffers (op=%u) are not
>> matched", i);
>>>    		if (check_bit(ops[i]->fft.op_flags,
>> RTE_BBDEV_FFT_POWER_MEAS))
>>>    			TEST_ASSERT_SUCCESS(validate_op_fft_chain(
>>> -				&ops[i]->fft.power_meas_output,
>> fft_pwr_orig),
>>> +				&ops[i]->fft.power_meas_output,
>> fft_pwr_orig,
>>> +skip_validate_output),
>>>    				"FFT Power Output buffers (op=%u) are not
>> matched", i);
>>>    	}
>>>
>>> diff --git a/app/test-bbdev/test_bbdev_vector.c
>>> b/app/test-bbdev/test_bbdev_vector.c
>>> index b3e9d4bb7504..e48947b211ac 100644
>>> --- a/app/test-bbdev/test_bbdev_vector.c
>>> +++ b/app/test-bbdev/test_bbdev_vector.c
>>> @@ -1050,6 +1050,20 @@ parse_fft_params(const char *key_token, char
>> *token,
>>>    			}
>>>    		}
>>>    		ret = ((err == NULL) || (*err != '\0')) ? -1 : 0;
>>> +	} else if (!strcmp(key_token, "fft_window_width")) {
>>> +		tok = strtok(token, VALUE_DELIMITER);
>>> +		if (tok == NULL)
>>> +			return -1;
>>> +		for (i = 0; i < FFT_WIN_SIZE; i++) {
>>> +			if (i == 0)
>>> +				vector->fft_window_width_vec = (uint32_t)
>> strtoul(tok, &err, 0);
>>> +			if (i < (FFT_WIN_SIZE - 1)) {
>>> +				tok = strtok(NULL, VALUE_DELIMITER);
>>> +				if (tok == NULL)
>>> +					return -1;
>>> +			}
>>> +		}
>>> +		ret = ((err == NULL) || (*err != '\0')) ? -1 : 0;
>>>    	} else if (!strcmp(key_token, "op_flags")) {
>>>    		vector->mask |= TEST_BBDEV_VF_OP_FLAGS;
>>>    		ret = parse_turbo_flags(token, &op_flags, vector->op_type);
>> diff
>>> --git a/app/test-bbdev/test_bbdev_vector.h
>>> b/app/test-bbdev/test_bbdev_vector.h
>>> index 14b8ef2764ad..ba1d0d20f9ea 100644
>>> --- a/app/test-bbdev/test_bbdev_vector.h
>>> +++ b/app/test-bbdev/test_bbdev_vector.h
>>> @@ -69,6 +69,8 @@ struct test_bbdev_vector {
>>>    	};
>>>    	/* Additional storage for op data entries */
>>>    	struct op_data_entries entries[DATA_NUM_TYPES];
>>> +	/* Vector FFT window width assumption. */
>>> +	uint16_t fft_window_width_vec;
>>>    };
>>>
>>>    /* fills test vector parameters based on test file */
>