[PATCH v2] crypto/ipsec_mb: use new ipad/opad calculation API

Wathsala Wathawana Vithanage wathsala.vithanage at arm.com
Tue Mar 5 16:16:36 CET 2024


> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch at intel.com>
> Signed-off-by: Brian Dooley <brian.dooley at intel.com>
> Acked-by: Ciara Power <ciara.power at intel.com>

Acked-by: Wathsala Vithanage <wathsala.vithanage at arm.com>

> 
> Depends-on: series-30989 ("crypto/ipsec_mb: bump minimum IPsec Multi-
> buffer version")
> 
> v2:
> - Remove ipsec mb version checks
> ---
>  drivers/crypto/ipsec_mb/pmd_aesni_mb.c | 75 ++------------------------
>  1 file changed, 5 insertions(+), 70 deletions(-)
> 
> diff --git a/drivers/crypto/ipsec_mb/pmd_aesni_mb.c
> b/drivers/crypto/ipsec_mb/pmd_aesni_mb.c
> index 4de4866cf3..251e18ec7a 100644
> --- a/drivers/crypto/ipsec_mb/pmd_aesni_mb.c
> +++ b/drivers/crypto/ipsec_mb/pmd_aesni_mb.c
> @@ -13,49 +13,6 @@ struct aesni_mb_op_buf_data {
>  	uint32_t offset;
>  };
> 
> -/**
> - * Calculate the authentication pre-computes
> - *
> - * @param one_block_hash	Function pointer
> - *				to calculate digest on ipad/opad
> - * @param ipad			Inner pad output byte array
> - * @param opad			Outer pad output byte array
> - * @param hkey			Authentication key
> - * @param hkey_len		Authentication key length
> - * @param blocksize		Block size of selected hash algo
> - */
> -static void
> -calculate_auth_precomputes(hash_one_block_t one_block_hash,
> -		uint8_t *ipad, uint8_t *opad,
> -		const uint8_t *hkey, uint16_t hkey_len,
> -		uint16_t blocksize)
> -{
> -	uint32_t i, length;
> -
> -	uint8_t ipad_buf[blocksize] __rte_aligned(16);
> -	uint8_t opad_buf[blocksize] __rte_aligned(16);
> -
> -	/* Setup inner and outer pads */
> -	memset(ipad_buf, HMAC_IPAD_VALUE, blocksize);
> -	memset(opad_buf, HMAC_OPAD_VALUE, blocksize);
> -
> -	/* XOR hash key with inner and outer pads */
> -	length = hkey_len > blocksize ? blocksize : hkey_len;
> -
> -	for (i = 0; i < length; i++) {
> -		ipad_buf[i] ^= hkey[i];
> -		opad_buf[i] ^= hkey[i];
> -	}
> -
> -	/* Compute partial hashes */
> -	(*one_block_hash)(ipad_buf, ipad);
> -	(*one_block_hash)(opad_buf, opad);
> -
> -	/* Clean up stack */
> -	memset(ipad_buf, 0, blocksize);
> -	memset(opad_buf, 0, blocksize);
> -}
> -
>  static inline int
>  is_aead_algo(IMB_HASH_ALG hash_alg, IMB_CIPHER_MODE cipher_mode)  {
> @@ -66,12 +23,10 @@ is_aead_algo(IMB_HASH_ALG hash_alg,
> IMB_CIPHER_MODE cipher_mode)
> 
>  /** Set session authentication parameters */  static int -
> aesni_mb_set_session_auth_parameters(const IMB_MGR *mb_mgr,
> +aesni_mb_set_session_auth_parameters(IMB_MGR *mb_mgr,
>  		struct aesni_mb_session *sess,
>  		const struct rte_crypto_sym_xform *xform)  {
> -	hash_one_block_t hash_oneblock_fn = NULL;
> -	unsigned int key_larger_block_size = 0;
>  	uint8_t hashed_key[HMAC_MAX_BLOCK_SIZE] = { 0 };
>  	uint32_t auth_precompute = 1;
> 
> @@ -267,18 +222,15 @@ aesni_mb_set_session_auth_parameters(const
> IMB_MGR *mb_mgr,
>  	switch (xform->auth.algo) {
>  	case RTE_CRYPTO_AUTH_MD5_HMAC:
>  		sess->template_job.hash_alg = IMB_AUTH_MD5;
> -		hash_oneblock_fn = mb_mgr->md5_one_block;
>  		break;
>  	case RTE_CRYPTO_AUTH_SHA1_HMAC:
>  		sess->template_job.hash_alg = IMB_AUTH_HMAC_SHA_1;
> -		hash_oneblock_fn = mb_mgr->sha1_one_block;
>  		if (xform->auth.key.length > get_auth_algo_blocksize(
>  				IMB_AUTH_HMAC_SHA_1)) {
>  			IMB_SHA1(mb_mgr,
>  				xform->auth.key.data,
>  				xform->auth.key.length,
>  				hashed_key);
> -			key_larger_block_size = 1;
>  		}
>  		break;
>  	case RTE_CRYPTO_AUTH_SHA1:
> @@ -287,14 +239,12 @@ aesni_mb_set_session_auth_parameters(const
> IMB_MGR *mb_mgr,
>  		break;
>  	case RTE_CRYPTO_AUTH_SHA224_HMAC:
>  		sess->template_job.hash_alg = IMB_AUTH_HMAC_SHA_224;
> -		hash_oneblock_fn = mb_mgr->sha224_one_block;
>  		if (xform->auth.key.length > get_auth_algo_blocksize(
>  				IMB_AUTH_HMAC_SHA_224)) {
>  			IMB_SHA224(mb_mgr,
>  				xform->auth.key.data,
>  				xform->auth.key.length,
>  				hashed_key);
> -			key_larger_block_size = 1;
>  		}
>  		break;
>  	case RTE_CRYPTO_AUTH_SHA224:
> @@ -303,14 +253,12 @@ aesni_mb_set_session_auth_parameters(const
> IMB_MGR *mb_mgr,
>  		break;
>  	case RTE_CRYPTO_AUTH_SHA256_HMAC:
>  		sess->template_job.hash_alg = IMB_AUTH_HMAC_SHA_256;
> -		hash_oneblock_fn = mb_mgr->sha256_one_block;
>  		if (xform->auth.key.length > get_auth_algo_blocksize(
>  				IMB_AUTH_HMAC_SHA_256)) {
>  			IMB_SHA256(mb_mgr,
>  				xform->auth.key.data,
>  				xform->auth.key.length,
>  				hashed_key);
> -			key_larger_block_size = 1;
>  		}
>  		break;
>  	case RTE_CRYPTO_AUTH_SHA256:
> @@ -319,14 +267,12 @@ aesni_mb_set_session_auth_parameters(const
> IMB_MGR *mb_mgr,
>  		break;
>  	case RTE_CRYPTO_AUTH_SHA384_HMAC:
>  		sess->template_job.hash_alg = IMB_AUTH_HMAC_SHA_384;
> -		hash_oneblock_fn = mb_mgr->sha384_one_block;
>  		if (xform->auth.key.length > get_auth_algo_blocksize(
>  				IMB_AUTH_HMAC_SHA_384)) {
>  			IMB_SHA384(mb_mgr,
>  				xform->auth.key.data,
>  				xform->auth.key.length,
>  				hashed_key);
> -			key_larger_block_size = 1;
>  		}
>  		break;
>  	case RTE_CRYPTO_AUTH_SHA384:
> @@ -335,14 +281,12 @@ aesni_mb_set_session_auth_parameters(const
> IMB_MGR *mb_mgr,
>  		break;
>  	case RTE_CRYPTO_AUTH_SHA512_HMAC:
>  		sess->template_job.hash_alg = IMB_AUTH_HMAC_SHA_512;
> -		hash_oneblock_fn = mb_mgr->sha512_one_block;
>  		if (xform->auth.key.length > get_auth_algo_blocksize(
>  				IMB_AUTH_HMAC_SHA_512)) {
>  			IMB_SHA512(mb_mgr,
>  				xform->auth.key.data,
>  				xform->auth.key.length,
>  				hashed_key);
> -			key_larger_block_size = 1;
>  		}
>  		break;
>  	case RTE_CRYPTO_AUTH_SHA512:
> @@ -376,19 +320,10 @@ aesni_mb_set_session_auth_parameters(const
> IMB_MGR *mb_mgr,
>  		return 0;
> 
>  	/* Calculate Authentication precomputes */
> -	if (key_larger_block_size) {
> -		calculate_auth_precomputes(hash_oneblock_fn,
> -			sess->auth.pads.inner, sess->auth.pads.outer,
> -			hashed_key,
> -			xform->auth.key.length,
> -			get_auth_algo_blocksize(sess-
> >template_job.hash_alg));
> -	} else {
> -		calculate_auth_precomputes(hash_oneblock_fn,
> -			sess->auth.pads.inner, sess->auth.pads.outer,
> -			xform->auth.key.data,
> -			xform->auth.key.length,
> -			get_auth_algo_blocksize(sess-
> >template_job.hash_alg));
> -	}
> +	imb_hmac_ipad_opad(mb_mgr, sess->template_job.hash_alg,
> +		xform->auth.key.data, xform->auth.key.length,
> +		sess->auth.pads.inner, sess->auth.pads.outer);
> +
>  	sess->template_job.u.HMAC._hashed_auth_key_xor_ipad =
>  		sess->auth.pads.inner;
>  	sess->template_job.u.HMAC._hashed_auth_key_xor_opad =
> --
> 2.25.1



More information about the dev mailing list