[EXT] [PATCH] app/test-crypto-perf: add throughput OOP decryption

[Akhil Goyal]

> During throughput running, re-filling the test data will
> impact the performance test result. So for now, to run
> decrypt throughput testing is not supported since the
> test data is not filled.
> 
> But if user requires OOP(out-of-place) mode, the test
> data from source mbuf will never be modified, and if
> the test data can be prepared out of the running loop,
> the decryption test should be fine.
> 
> This commit adds the support of out-of-place decryption
> testing for throughput.
> 


> Signed-off-by: Suanming Mou <suanmingm at nvidia.com>
> ---
>  app/test-crypto-perf/cperf_ops.c             |  5 ++-
>  app/test-crypto-perf/cperf_options_parsing.c |  8 +++++
>  app/test-crypto-perf/cperf_test_throughput.c | 37 +++++++++++++++++---
>  3 files changed, 44 insertions(+), 6 deletions(-)
> 
> diff --git a/app/test-crypto-perf/cperf_ops.c b/app/test-crypto-perf/cperf_ops.c
> index 84945d1313..1d57b78c2b 100644
> --- a/app/test-crypto-perf/cperf_ops.c
> +++ b/app/test-crypto-perf/cperf_ops.c
> @@ -608,7 +608,10 @@ cperf_set_ops_aead(struct rte_crypto_op **ops,
>  	}
> 
>  	if ((options->test == CPERF_TEST_TYPE_VERIFY) ||
> -			(options->test == CPERF_TEST_TYPE_LATENCY)) {
> +	    (options->test == CPERF_TEST_TYPE_LATENCY) ||
> +	    (options->test == CPERF_TEST_TYPE_THROUGHPUT &&
> +	     (options->aead_op == RTE_CRYPTO_AEAD_OP_DECRYPT ||
> +	      options->cipher_op == RTE_CRYPTO_CIPHER_OP_DECRYPT))) {
>  		for (i = 0; i < nb_ops; i++) {
>  			uint8_t *iv_ptr = rte_crypto_op_ctod_offset(ops[i],
>  					uint8_t *, iv_offset);
> diff --git a/app/test-crypto-perf/cperf_options_parsing.c b/app/test-crypto-
> perf/cperf_options_parsing.c
> index 75afedc7fd..6caca44371 100644
> --- a/app/test-crypto-perf/cperf_options_parsing.c
> +++ b/app/test-crypto-perf/cperf_options_parsing.c
> @@ -1291,6 +1291,14 @@ cperf_options_check(struct cperf_options *options)
>  		}
>  	}
> 
> +	if (options->test == CPERF_TEST_TYPE_THROUGHPUT &&
> +	    (options->aead_op == RTE_CRYPTO_AEAD_OP_DECRYPT ||
> +	     options->cipher_op == RTE_CRYPTO_CIPHER_OP_DECRYPT) &&
> +			!options->out_of_place) {
> +		RTE_LOG(ERR, USER1, "Only out-of-place is allowed in
> throughput decryption.\n");
> +		return -EINVAL;
> +	}

This check is blocking cipher_only decryption which should pass irrespective of inplace/oop and
Data correct/incorrect.

> +
>  	if (options->op_type == CPERF_CIPHER_ONLY ||
>  			options->op_type == CPERF_CIPHER_THEN_AUTH ||
>  			options->op_type == CPERF_AUTH_THEN_CIPHER) {
> diff --git a/app/test-crypto-perf/cperf_test_throughput.c b/app/test-crypto-
> perf/cperf_test_throughput.c
> index f8f8bd717f..eab25ec863 100644
> --- a/app/test-crypto-perf/cperf_test_throughput.c
> +++ b/app/test-crypto-perf/cperf_test_throughput.c
> @@ -98,6 +98,29 @@ cperf_throughput_test_constructor(struct rte_mempool
> *sess_mp,
>  	return NULL;
>  }
> 
> +static void
> +cperf_verify_init_ops(struct rte_mempool *mp __rte_unused,
> +		      void *opaque_arg,
> +		      void *obj,
> +		      __rte_unused unsigned int i)
> +{
> +	uint16_t iv_offset = sizeof(struct rte_crypto_op) +
> +		sizeof(struct rte_crypto_sym_op);
> +	uint32_t imix_idx = 0;
> +	struct cperf_throughput_ctx *ctx = opaque_arg;
> +	struct rte_crypto_op *op = obj;
> +
> +	(ctx->populate_ops)(&op, ctx->src_buf_offset,
> +			ctx->dst_buf_offset,
> +			1, ctx->sess, ctx->options,
> +			ctx->test_vector, iv_offset, &imix_idx, NULL);
> +
> +	cperf_mbuf_set(op->sym->m_src,
> +			ctx->options,
> +			ctx->test_vector);
Unnecessary line break.

> +
Extra line

> +}
> +
>  int
>  cperf_throughput_test_runner(void *test_ctx)
>  {
> @@ -143,6 +166,9 @@ cperf_throughput_test_runner(void *test_ctx)
>  	uint16_t iv_offset = sizeof(struct rte_crypto_op) +
>  		sizeof(struct rte_crypto_sym_op);
> 
> +	if (ctx->options->out_of_place)
> +		rte_mempool_obj_iter(ctx->pool, cperf_verify_init_ops, (void
> *)ctx);
> +
>  	while (test_burst_size <= ctx->options->max_burst_size) {
>  		uint64_t ops_enqd = 0, ops_enqd_total = 0, ops_enqd_failed = 0;
>  		uint64_t ops_deqd = 0, ops_deqd_total = 0, ops_deqd_failed = 0;
> @@ -175,11 +201,12 @@ cperf_throughput_test_runner(void *test_ctx)
>  			}
> 
>  			/* Setup crypto op, attach mbuf etc */
> -			(ctx->populate_ops)(ops, ctx->src_buf_offset,
> -					ctx->dst_buf_offset,
> -					ops_needed, ctx->sess,
> -					ctx->options, ctx->test_vector,
> -					iv_offset, &imix_idx, &tsc_start);
> +			if (!ctx->options->out_of_place)
> +				(ctx->populate_ops)(ops, ctx->src_buf_offset,
> +						ctx->dst_buf_offset,
> +						ops_needed, ctx->sess,
> +						ctx->options, ctx->test_vector,
> +						iv_offset, &imix_idx,
> &tsc_start);
> 
>  			/**
>  			 * When ops_needed is smaller than ops_enqd, the
> --
> 2.34.1