[PATCH v2 01/25] net/axgbe: fix mdio access for non-zero ports and CL45 PHYs

[Sebastian, Selwin]

[AMD Official Use Only - AMD Internal Distribution Only]

Acked-by: Selwin Sebastian<selwin.sebastian at amd.com>

-----Original Message-----
From: Ande, Venkat Kumar <VenkatKumar.Ande at amd.com>
Sent: Tuesday, May 7, 2024 6:13 PM
To: dev at dpdk.org
Cc: Sebastian, Selwin <Selwin.Sebastian at amd.com>; Ande, Venkat Kumar <VenkatKumar.Ande at amd.com>; stable at dpdk.org
Subject: [PATCH v2 01/25] net/axgbe: fix mdio access for non-zero ports and CL45 PHYs

The XGBE supports performing MDIO operations using an MDIO command request. The driver mistakenly uses the mdio port address as the MDIO command request device address instead of the MDIO command request port address. Additionally, the driver does not properly check for and create a clause 45 MDIO command

Without the fix user will get a incorrect value from PHY device.

Check the supplied MDIO register to determine if the request is a clause
45 operation (MII_ADDR_C45). For a clause 45 operation, extract device address and register number from the supplied MDIO register and use them to set the MDIO command request device address and register number fields.
For a clause 22 operation, the MDIO request device address is set to zero and the MDIO command request register number is set to the supplied MDIO register. In either case, the supplied MDIO port address is used as the MDIO command request port address.

Fixes: 4ac7516b8b39 ("net/axgbe: add phy init and related APIs")
Cc: stable at dpdk.org

Signed-off-by: Venkat Kumar Ande <venkatkumar.ande at amd.com>
---
 drivers/net/axgbe/axgbe_common.h |  2 --
 drivers/net/axgbe/axgbe_dev.c    | 22 ++++++++++++++++------
 2 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/net/axgbe/axgbe_common.h b/drivers/net/axgbe/axgbe_common.h
index a5d11c5832..51532fb34a 100644
--- a/drivers/net/axgbe/axgbe_common.h
+++ b/drivers/net/axgbe/axgbe_common.h
@@ -407,8 +407,6 @@
 #define MAC_MDIOSCAR_PA_WIDTH          5
 #define MAC_MDIOSCAR_RA_INDEX          0
 #define MAC_MDIOSCAR_RA_WIDTH          16
-#define MAC_MDIOSCAR_REG_INDEX         0
-#define MAC_MDIOSCAR_REG_WIDTH         21
 #define MAC_MDIOSCCDR_BUSY_INDEX       22
 #define MAC_MDIOSCCDR_BUSY_WIDTH       1
 #define MAC_MDIOSCCDR_CMD_INDEX                16
diff --git a/drivers/net/axgbe/axgbe_dev.c b/drivers/net/axgbe/axgbe_dev.c index 6a7fddffca..3389954aa6 100644
--- a/drivers/net/axgbe/axgbe_dev.c
+++ b/drivers/net/axgbe/axgbe_dev.c
@@ -63,15 +63,27 @@ static int mdio_complete(struct axgbe_port *pdata)
        return 0;
 }

+static unsigned int axgbe_create_mdio_sca(int port, int reg) {
+       unsigned int mdio_sca, da;
+
+       da = (reg & MII_ADDR_C45) ? reg >> 16 : 0;
+
+       mdio_sca = 0;
+       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, RA, reg);
+       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, PA, port);
+       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, DA, da);
+
+       return mdio_sca;
+}
+
 static int axgbe_write_ext_mii_regs(struct axgbe_port *pdata, int addr,
                                    int reg, u16 val)
 {
        unsigned int mdio_sca, mdio_sccd;
        uint64_t timeout;

-       mdio_sca = 0;
-       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, REG, reg);
-       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, DA, addr);
+       mdio_sca = axgbe_create_mdio_sca(addr, reg);
        AXGMAC_IOWRITE(pdata, MAC_MDIOSCAR, mdio_sca);

        mdio_sccd = 0;
@@ -97,9 +109,7 @@ static int axgbe_read_ext_mii_regs(struct axgbe_port *pdata, int addr,
        unsigned int mdio_sca, mdio_sccd;
        uint64_t timeout;

-       mdio_sca = 0;
-       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, REG, reg);
-       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, DA, addr);
+       mdio_sca = axgbe_create_mdio_sca(addr, reg);
        AXGMAC_IOWRITE(pdata, MAC_MDIOSCAR, mdio_sca);

        mdio_sccd = 0;
--
2.34.1