[PATCH v2 1/2] net/bonding: standard the log message

[lihuisong (C)]

Acked-by: Huisong Li <lihuisong at huawei.com>
在 2024/10/11 11:24, Chaoyong He 写道:
> From: Long Wu <long.wu at corigine.com>
>
> According to the check rules in the patch check script,
> drivers and libraries must use the logging framework.
>
> So standard the log message of bonding driver by using
> the logging framework.
>
> Signed-off-by: Long Wu <long.wu at corigine.com>
> Reviewed-by: Peng Zhang <peng.zhang at corigine.com>
> Reviewed-by: Chaoyong He <chaoyong.he at corigine.com>
> ---
>   drivers/net/bonding/bonding_testpmd.c | 52 +++++++++++++--------------
>   1 file changed, 25 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/net/bonding/bonding_testpmd.c b/drivers/net/bonding/bonding_testpmd.c
> index 8fcd6cadd0..fc0bfd8f74 100644
> --- a/drivers/net/bonding/bonding_testpmd.c
> +++ b/drivers/net/bonding/bonding_testpmd.c
> @@ -34,15 +34,14 @@ static void cmd_set_bonding_mode_parsed(void *parsed_result,
>   	 * of device changed.
>   	 */
>   	if (port->port_status != RTE_PORT_STOPPED) {
> -		fprintf(stderr,
> -			"\t Error: Can't set bonding mode when port %d is not stopped\n",
> +		TESTPMD_LOG(ERR, "Error: Can't set bonding mode when port %d is not stopped\n",
>   			port_id);
>   		return;
>   	}
>   
>   	/* Set the bonding mode for the relevant port. */
>   	if (rte_eth_bond_mode_set(port_id, res->value) != 0)
> -		fprintf(stderr, "\t Failed to set bonding mode for port = %d.\n",
> +		TESTPMD_LOG(ERR, "Failed to set bonding mode for port = %d.\n",
>   			port_id);
>   }
>   
> @@ -98,24 +97,26 @@ static void cmd_set_bonding_lacp_dedicated_queues_parsed(void *parsed_result,
>   
>   	/** Check if the port is not started **/
>   	if (port->port_status != RTE_PORT_STOPPED) {
> -		fprintf(stderr, "Please stop port %d first\n", port_id);
> +		TESTPMD_LOG(ERR, "Please stop port %d first\n", port_id);
>   		return;
>   	}
>   
>   	if (!strcmp(res->mode, "enable")) {
>   		if (rte_eth_bond_8023ad_dedicated_queues_enable(port_id) == 0)
> -			printf("Dedicate queues for LACP control packets"
> -					" enabled\n");
> +			TESTPMD_LOG(INFO,
> +				"Dedicate queues for LACP control packets enabled\n");
>   		else
> -			printf("Enabling dedicate queues for LACP control "
> -					"packets on port %d failed\n", port_id);
> +			TESTPMD_LOG(ERR,
> +				"Enabling dedicate queues for LACP control "
> +				"packets on port %d failed\n", port_id);
>   	} else if (!strcmp(res->mode, "disable")) {
>   		if (rte_eth_bond_8023ad_dedicated_queues_disable(port_id) == 0)
> -			printf("Dedicated queues for LACP control packets "
> -					"disabled\n");
> +			TESTPMD_LOG(INFO,
> +				"Dedicated queues for LACP control packets disabled\n");
>   		else
> -			printf("Disabling dedicated queues for LACP control "
> -					"traffic on port %d failed\n", port_id);
> +			TESTPMD_LOG(ERR,
> +				"Disabling dedicated queues for LACP control "
> +				"traffic on port %d failed\n", port_id);
>   	}
>   }
>   
> @@ -178,14 +179,13 @@ static void cmd_set_bonding_balance_xmit_policy_parsed(void *parsed_result,
>   	} else if (!strcmp(res->policy, "l34")) {
>   		policy = BALANCE_XMIT_POLICY_LAYER34;
>   	} else {
> -		fprintf(stderr, "\t Invalid xmit policy selection");
> +		TESTPMD_LOG(ERR, "Invalid xmit policy selection\n");
>   		return;
>   	}
>   
>   	/* Set the bonding mode for the relevant port. */
>   	if (rte_eth_bond_xmit_policy_set(port_id, policy) != 0) {
> -		fprintf(stderr,
> -			"\t Failed to set bonding balance xmit policy for port = %d.\n",
> +		TESTPMD_LOG(ERR, "Failed to set bonding balance xmit policy for port = %d.\n",
>   			port_id);
>   	}
>   }
> @@ -239,7 +239,7 @@ static void cmd_show_bonding_config_parsed(void *parsed_result,
>   
>   	bonding_mode = rte_eth_bond_mode_get(port_id);
>   	if (bonding_mode < 0) {
> -		fprintf(stderr, "\tFailed to get bonding mode for port = %d\n",
> +		TESTPMD_LOG(ERR, "Failed to get bonding mode for port = %d\n",
>   			port_id);
>   		return;
>   	}
> @@ -292,7 +292,7 @@ static void cmd_set_bonding_primary_parsed(void *parsed_result,
>   
>   	/* Set the primary member for a bonding device. */
>   	if (rte_eth_bond_primary_set(main_port_id, member_port_id) != 0) {
> -		fprintf(stderr, "\t Failed to set primary member for port = %d.\n",
> +		TESTPMD_LOG(ERR, "Failed to set primary member for port = %d.\n",
>   			main_port_id);
>   		return;
>   	}
> @@ -348,8 +348,7 @@ static void cmd_add_bonding_member_parsed(void *parsed_result,
>   
>   	/* add the member for a bonding device. */
>   	if (rte_eth_bond_member_add(main_port_id, member_port_id) != 0) {
> -		fprintf(stderr,
> -			"\t Failed to add member %d to main port = %d.\n",
> +		TESTPMD_LOG(ERR, "Failed to add member %d to main port = %d.\n",
>   			member_port_id, main_port_id);
>   		return;
>   	}
> @@ -407,8 +406,7 @@ static void cmd_remove_bonding_member_parsed(void *parsed_result,
>   
>   	/* remove the member from a bonding device. */
>   	if (rte_eth_bond_member_remove(main_port_id, member_port_id) != 0) {
> -		fprintf(stderr,
> -			"\t Failed to remove member %d from main port = %d.\n",
> +		TESTPMD_LOG(ERR, "Failed to remove member %d from main port = %d.\n",
>   			member_port_id, main_port_id);
>   		return;
>   	}
> @@ -467,7 +465,7 @@ static void cmd_create_bonding_device_parsed(void *parsed_result,
>   	int ret;
>   
>   	if (test_done == 0) {
> -		fprintf(stderr, "Please stop forwarding first\n");
> +		TESTPMD_LOG(ERR, "Please stop forwarding first\n");
>   		return;
>   	}
>   
> @@ -477,10 +475,10 @@ static void cmd_create_bonding_device_parsed(void *parsed_result,
>   	/* Create a new bonding device. */
>   	port_id = rte_eth_bond_create(ethdev_name, res->mode, res->socket);
>   	if (port_id < 0) {
> -		fprintf(stderr, "\t Failed to create bonding device.\n");
> +		TESTPMD_LOG(ERR, "Failed to create bonding device.\n");
>   		return;
>   	}
> -	printf("Created new bonding device %s on (port %d).\n", ethdev_name,
> +	TESTPMD_LOG(INFO, "Created new bonding device %s on (port %d).\n", ethdev_name,
>   		port_id);
>   
>   	/* Update number of ports */
> @@ -488,7 +486,7 @@ static void cmd_create_bonding_device_parsed(void *parsed_result,
>   	reconfig(port_id, res->socket);
>   	ret = rte_eth_promiscuous_enable(port_id);
>   	if (ret != 0)
> -		fprintf(stderr, "Failed to enable promiscuous mode for port %u: %s - ignore\n",
> +		TESTPMD_LOG(NOTICE, "Failed to enable promiscuous mode for port %u: %s - ignore\n",
>   			port_id, rte_strerror(-ret));
>   
>   	ports[port_id].update_conf = 1;
> @@ -550,7 +548,7 @@ static void cmd_set_bond_mac_addr_parsed(void *parsed_result,
>   
>   	/* check the return value and print it if is < 0 */
>   	if (ret < 0)
> -		fprintf(stderr, "set_bond_mac_addr error: (%s)\n",
> +		TESTPMD_LOG(ERR, "set_bond_mac_addr error: (%s)\n",
>   			strerror(-ret));
>   }
>   
> @@ -603,7 +601,7 @@ static void cmd_set_bond_mon_period_parsed(void *parsed_result,
>   
>   	/* check the return value and print it if is < 0 */
>   	if (ret < 0)
> -		fprintf(stderr, "set_bond_mac_addr error: (%s)\n",
> +		TESTPMD_LOG(ERR, "set_bond_mac_addr error: (%s)\n",
>   			strerror(-ret));
>   }
>