[PATCH v6 1/2] ethdev: Add link_speed lanes support

[Ajit Khaparde]

On Thu, Sep 26, 2024 at 5:39 PM Ferruh Yigit <ferruh.yigit at amd.com> wrote:
>
> On 9/26/2024 10:43 PM, Damodharam Ammepalli wrote:
> > Update the eth_dev_ops structure with new function vectors
> > to get, get capabilities and set ethernet link speed lanes.
> > Update the testpmd to provide required config and information
> > display infrastructure.
> >
> > The supporting ethernet controller driver will register callbacks
> > to avail link speed lanes config and get services. This lanes
> > configuration is applicable only when the nic is forced to fixed
> > speeds. In Autonegiation mode, the hardware automatically
> > negotiates the number of lanes.
> >
> > These are the new commands.
> >
> > testpmd> show port 0 speed_lanes capabilities
> >
> >  Supported speeds         Valid lanes
> > -----------------------------------
> >  10 Gbps                  1
> >  25 Gbps                  1
> >  40 Gbps                  4
> >  50 Gbps                  1 2
> >  100 Gbps                 1 2 4
> >  200 Gbps                 2 4
> >  400 Gbps                 4 8
> > testpmd>
> >
> > testpmd>
> > testpmd> port stop 0
> > testpmd> port config 0 speed_lanes 4
> > testpmd> port config 0 speed 200000 duplex full
> > testpmd> port start 0
> > testpmd>
> > testpmd> show port info 0
> >
> > ********************* Infos for port 0  *********************
> > MAC address: 14:23:F2:C3:BA:D2
> > Device name: 0000:b1:00.0
> > Driver name: net_bnxt
> > Firmware-version: 228.9.115.0
> > Connect to socket: 2
> > memory allocation on the socket: 2
> > Link status: up
> > Link speed: 200 Gbps
> > Active Lanes: 4
> > Link duplex: full-duplex
> > Autoneg status: Off
> >
> > Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli at broadcom.com>
> >
>
> Reviewed-by: Ferruh Yigit <ferruh.yigit at amd.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde at broadcom.com>

>
> Suggested patch title:
> ethdev: support link speed lanes
>
> <...>
>
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
> > + *
> > + * Get Active lanes.
> > + *
> > + * @param port_id
> > + *   The port identifier of the Ethernet device.
> > + * @param lanes
> > + *   Driver updates lanes with the number of active lanes.
> > + *   On a supported NIC on link up, lanes will be a non-zero value irrespective whether the
> > + *   link is Autonegotiated or Fixed speed. No information is dispalyed for error.
> >
>
> s/dispalyed/displayed/
>
> I can fix while merging
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4218 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://mails.dpdk.org/archives/dev/attachments/20240927/8b4c9592/attachment.bin>