[PATCH 2/3] net/mlx5: add jump FDB Rx flag

Bing Zhao bingz at nvidia.com
Wed Feb 26 11:37:31 CET 2025


Hi

> -----Original Message-----
> From: Suanming Mou <suanmingm at nvidia.com>
> Sent: Tuesday, February 25, 2025 8:45 AM
> To: Dariusz Sosnowski <dsosnowski at nvidia.com>; Slava Ovsiienko
> <viacheslavo at nvidia.com>; Bing Zhao <bingz at nvidia.com>; Ori Kam
> <orika at nvidia.com>; Matan Azrad <matan at nvidia.com>
> Cc: dev at dpdk.org; Raslan Darawsheh <rasland at nvidia.com>
> Subject: [PATCH 2/3] net/mlx5: add jump FDB Rx flag
> 
> When jump FDB Rx is supported, flow will be able to jump from FDB Tx to
> FDB Rx, in that case the dest action in FDB Rx table should support FDB Tx
> as well.
> 
> Signed-off-by: Suanming Mou <suanmingm at nvidia.com>
> ---
>  drivers/common/mlx5/mlx5_devx_cmds.c | 8 ++++++++
> drivers/common/mlx5/mlx5_devx_cmds.h | 1 +
>  drivers/net/mlx5/linux/mlx5_os.c     | 1 +
>  drivers/net/mlx5/mlx5.h              | 1 +
>  drivers/net/mlx5/mlx5_flow_hw.c      | 8 +++++++-
>  5 files changed, 18 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/common/mlx5/mlx5_devx_cmds.c
> b/drivers/common/mlx5/mlx5_devx_cmds.c
> index f504b29f31..eb8553e8ad 100644
> --- a/drivers/common/mlx5/mlx5_devx_cmds.c
> +++ b/drivers/common/mlx5/mlx5_devx_cmds.c
> @@ -924,6 +924,7 @@ mlx5_devx_cmd_query_hca_attr(void *ctx,
>  	uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0};
>  	bool hca_cap_2_sup;
>  	uint64_t general_obj_types_supported = 0;
> +	uint64_t stc_action_type_127_64;
>  	void *hcattr;
>  	int rc, i;
> 
> @@ -1352,6 +1353,13 @@ mlx5_devx_cmd_query_hca_attr(void *ctx,
>  		attr->fdb_unified_en = MLX5_GET(wqe_based_flow_table_cap,
>  						hcattr,
>  						fdb_unified_en);
> +		stc_action_type_127_64 = MLX5_GET64(wqe_based_flow_table_cap,
> +						    hcattr,
> +						    stc_action_type_127_64);
> +		if (stc_action_type_127_64 &
> +		   (1 <<
> (MLX5_IFC_STC_ACTION_TYPE_JUMP_FLOW_TABLE_FDB_RX_BIT_INDEX -
> +			  MLX5_IFC_STC_ACTION_TYPE_BIT_64_INDEX)))
> +			attr->jump_fdb_rx_en = true;

I assume integer value 1 is enough, since it is a bit field, no need to use bool type. 

>  	}
>  	/* Query HCA attribute for ROCE. */
>  	if (attr->roce) {
> diff --git a/drivers/common/mlx5/mlx5_devx_cmds.h
> b/drivers/common/mlx5/mlx5_devx_cmds.h
> index 8de4210fb2..6c726a0d46 100644
> --- a/drivers/common/mlx5/mlx5_devx_cmds.h
> +++ b/drivers/common/mlx5/mlx5_devx_cmds.h
> @@ -326,6 +326,7 @@ struct mlx5_hca_attr {
>  	uint32_t lag_rx_port_affinity:1;
>  	uint32_t wqe_based_flow_table_sup:1;
>  	uint32_t fdb_unified_en:1;
> +	uint32_t jump_fdb_rx_en:1;
>  	uint8_t max_header_modify_pattern_length;
>  	uint64_t system_image_guid;
>  	uint32_t log_max_conn_track_offload:5; diff --git
> a/drivers/net/mlx5/linux/mlx5_os.c b/drivers/net/mlx5/linux/mlx5_os.c
> index 9410211e3b..4e64026137 100644
> --- a/drivers/net/mlx5/linux/mlx5_os.c
> +++ b/drivers/net/mlx5/linux/mlx5_os.c
> @@ -1718,6 +1718,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
>  		priv->unified_fdb_en = !!priv->master;
>  		DRV_LOG(DEBUG, "port %u: unified FDB %s enabled.",
>  			eth_dev->data->port_id, priv->unified_fdb_en ? "is" :
> "isn't");
> +		priv->jump_fdb_rx_en = sh->cdev-
> >config.hca_attr.jump_fdb_rx_en;

Can we add some INFO or DEBUG level log to indicate this to the user?

>  		if (priv->sh->config.dv_esw_en) {
>  			uint32_t usable_bits;
>  			uint32_t required_bits;
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index
> f73f6e63ff..545ba48b3c 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -1987,6 +1987,7 @@ struct mlx5_priv {
>  	uint32_t num_lag_ports:4; /* Number of ports can be bonded. */
>  	uint32_t tunnel_enabled:1; /* If tunnel offloading is enabled on
> rxqs. */
>  	uint32_t unified_fdb_en:1; /* Unified FDB flag per port. */
> +	uint32_t jump_fdb_rx_en:1; /* Jump from FDB Tx to FDB Rx flag per
> +port. */
>  	uint16_t domain_id; /* Switch domain identifier. */
>  	uint16_t vport_id; /* Associated VF vport index (if any). */
>  	uint32_t vport_meta_tag; /* Used for vport index match ove VF LAG.
> */ diff --git a/drivers/net/mlx5/mlx5_flow_hw.c
> b/drivers/net/mlx5/mlx5_flow_hw.c index f0888dbf0e..83f55ed3e8 100644
> --- a/drivers/net/mlx5/mlx5_flow_hw.c
> +++ b/drivers/net/mlx5/mlx5_flow_hw.c
> @@ -9322,6 +9322,7 @@ flow_hw_grp_create_cb(void *tool_ctx, void *cb_ctx)
>  	struct mlx5_flow_group *grp_data;
>  	struct mlx5dr_table *tbl = NULL;
>  	struct mlx5dr_action *jump;
> +	uint32_t hws_flags;
>  	uint32_t idx = 0;
>  	MKSTR(matcher_name, "%s_%s_%u_%u_matcher_list",
>  	      attr->transfer ? "FDB" : "NIC", attr->egress ? "egress" :
> "ingress", @@ -9342,10 +9343,15 @@ flow_hw_grp_create_cb(void *tool_ctx,
> void *cb_ctx)
>  		goto error;
>  	grp_data->tbl = tbl;
>  	if (attr->group) {
> +		hws_flags = mlx5_hw_act_dest_table_flag[dr_tbl_attr.type];
> +		/* For case of jump from FDB Tx to FDB Rx as it is supported
> now. */
> +		if (priv->jump_fdb_rx_en &&
> +		    dr_tbl_attr.type == MLX5DR_TABLE_TYPE_FDB_RX)
> +			hws_flags |= MLX5DR_ACTION_FLAG_HWS_FDB_TX;
>  		/* Jump action be used by non-root table. */
>  		jump = mlx5dr_action_create_dest_table
>  			(priv->dr_ctx, tbl,
> -			 mlx5_hw_act_dest_table_flag[dr_tbl_attr.type]);
> +			 hws_flags);
>  		if (!jump)
>  			goto error;
>  		grp_data->jump.hws_action = jump;
> --
> 2.34.1



More information about the dev mailing list