[PATCH 13/15] net/dpaa2: optimize to prefetch next parser result
Prashant Gupta
prashant.gupta_3 at nxp.com
Tue Oct 14 08:00:43 CEST 2025
From: Jun Yang <jun.yang at nxp.com>
Prefetch next parser result for either VA or PA mode.
This prefetch doesn't perform on LX2160A.
Signed-off-by: Jun Yang <jun.yang at nxp.com>
---
drivers/net/dpaa2/dpaa2_rxtx.c | 64 ++++++++++++++++------------------
1 file changed, 30 insertions(+), 34 deletions(-)
diff --git a/drivers/net/dpaa2/dpaa2_rxtx.c b/drivers/net/dpaa2/dpaa2_rxtx.c
index 8f932be635..dcaa9203b3 100644
--- a/drivers/net/dpaa2/dpaa2_rxtx.c
+++ b/drivers/net/dpaa2/dpaa2_rxtx.c
@@ -520,6 +520,23 @@ eth_mbuf_to_sg_fd(struct rte_mbuf *mbuf,
return 0;
}
+static inline void
+dpaa2_dev_prefetch_next_psr(const struct qbman_result *dq)
+{
+ const struct qbman_fd *fd;
+ const struct dpaa2_annot_hdr *annotation;
+ uint64_t annot_iova;
+
+ dq++;
+
+ fd = qbman_result_DQ_fd(dq);
+ annot_iova = DPAA2_GET_FD_ADDR(fd) + DPAA2_FD_PTA_SIZE;
+ annotation = DPAA2_IOVA_TO_VADDR(annot_iova);
+
+ /** Prefetch from word3 to parse next header.*/
+ rte_prefetch0(&annotation->word3);
+}
+
static void
eth_mbuf_to_fd(struct rte_mbuf *mbuf,
struct qbman_fd *fd,
@@ -845,18 +862,11 @@ dpaa2_dev_prefetch_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
if (unlikely((status & QBMAN_DQ_STAT_VALIDFRAME) == 0))
continue;
}
- fd = qbman_result_DQ_fd(dq_storage);
-
-#ifndef RTE_LIBRTE_DPAA2_USE_PHYS_IOVA
- if (dpaa2_svr_family != SVR_LX2160A) {
- const struct qbman_fd *next_fd =
- qbman_result_DQ_fd(dq_storage + 1);
- /* Prefetch Annotation address for the parse results */
- rte_prefetch0(DPAA2_IOVA_TO_VADDR((DPAA2_GET_FD_ADDR(
- next_fd) + DPAA2_FD_PTA_SIZE + 16)));
- }
-#endif
+ if (dpaa2_svr_family != SVR_LX2160A)
+ /** Packet type is parsed from FRC for LX2160A.*/
+ dpaa2_dev_prefetch_next_psr(dq_storage);
+ fd = qbman_result_DQ_fd(dq_storage);
if (unlikely(DPAA2_FD_GET_FORMAT(fd) == qbman_fd_sg))
bufs[num_rx] = eth_sg_fd_to_mbuf(fd, eth_data->port_id);
else
@@ -1059,22 +1069,11 @@ dpaa2_dev_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
QBMAN_DQ_STAT_VALIDFRAME) == 0))
continue;
}
- fd = qbman_result_DQ_fd(dq_storage);
-
-#ifndef RTE_LIBRTE_DPAA2_USE_PHYS_IOVA
- if (dpaa2_svr_family != SVR_LX2160A) {
- const struct qbman_fd *next_fd =
- qbman_result_DQ_fd(dq_storage + 1);
-
- /* Prefetch Annotation address for the parse
- * results.
- */
- rte_prefetch0((DPAA2_IOVA_TO_VADDR(
- DPAA2_GET_FD_ADDR(next_fd) +
- DPAA2_FD_PTA_SIZE + 16)));
- }
-#endif
+ if (dpaa2_svr_family != SVR_LX2160A)
+ /** Packet type is parsed from FRC for LX2160A.*/
+ dpaa2_dev_prefetch_next_psr(dq_storage);
+ fd = qbman_result_DQ_fd(dq_storage);
if (unlikely(DPAA2_FD_GET_FORMAT(fd) == qbman_fd_sg))
bufs[num_rx] = eth_sg_fd_to_mbuf(fd,
eth_data->port_id);
@@ -1115,7 +1114,7 @@ uint16_t dpaa2_dev_tx_conf(void *queue)
int ret, num_tx_conf = 0, num_pulled;
uint8_t pending, status;
struct qbman_swp *swp;
- const struct qbman_fd *fd, *next_fd;
+ const struct qbman_fd *fd;
struct qbman_pull_desc pulldesc;
struct qbman_release_desc releasedesc;
uint32_t bpid;
@@ -1183,14 +1182,11 @@ uint16_t dpaa2_dev_tx_conf(void *queue)
QBMAN_DQ_STAT_VALIDFRAME) == 0))
continue;
}
- fd = qbman_result_DQ_fd(dq_storage);
-
- next_fd = qbman_result_DQ_fd(dq_storage + 1);
- /* Prefetch Annotation address for the parse results */
- rte_prefetch0((void *)(size_t)
- (DPAA2_GET_FD_ADDR(next_fd) +
- DPAA2_FD_PTA_SIZE + 16));
+ if (dpaa2_svr_family != SVR_LX2160A)
+ /** Packet type is parsed from FRC for LX2160A.*/
+ dpaa2_dev_prefetch_next_psr(dq_storage);
+ fd = qbman_result_DQ_fd(dq_storage);
bpid = DPAA2_GET_FD_BPID(fd);
/* Create a release descriptor required for releasing
--
2.43.0
More information about the dev
mailing list