[PATCH v8 3/3] mbuf: optimize reset of reinitialized mbufs

[Stephen Hemminger]

On Thu, 9 Oct 2025 18:15:12 +0100
Bruce Richardson <bruce.richardson at intel.com> wrote:

> On Sat, Aug 23, 2025 at 06:30:02AM +0000, Morten Brørup wrote:
> > An optimized function for resetting a bulk of newly allocated
> > reinitialized mbufs (a.k.a. raw mbufs) was added.
> > 
> > Compared to the normal packet mbuf reset function, it takes advantage of
> > the following two details:
> > 1. The 'next' and 'nb_segs' fields are already reset, so resetting them
> > has been omitted.
> > 2. When resetting the mbuf, the 'ol_flags' field must indicate whether the
> > mbuf uses an external buffer, and the 'data_off' field must not exceed the
> > data room size when resetting the data offset to include the default
> > headroom.
> > Unlike the normal packet mbuf reset function, which reads the mbuf itself
> > to get the information required for resetting these two fields, this
> > function gets the information from the mempool.
> > 
> > This makes the function write-only of the mbuf, unlike the normal packet
> > mbuf reset function, which is read-modify-write of the mbuf.
> > 
> > Signed-off-by: Morten Brørup <mb at smartsharesystems.com>
> > ---
> >  lib/mbuf/rte_mbuf.h | 74 ++++++++++++++++++++++++++++-----------------
> >  1 file changed, 46 insertions(+), 28 deletions(-)
> > 
> > diff --git a/lib/mbuf/rte_mbuf.h b/lib/mbuf/rte_mbuf.h
> > index 49c93ab356..6f37a2e91e 100644
> > --- a/lib/mbuf/rte_mbuf.h
> > +++ b/lib/mbuf/rte_mbuf.h
> > @@ -954,6 +954,50 @@ static inline void rte_pktmbuf_reset_headroom(struct rte_mbuf *m)
> >  					(uint16_t)m->buf_len);
> >  }
> >  
> > +/**
> > + * Reset the fields of a bulk of packet mbufs to their default values.
> > + *
> > + * The caller must ensure that the mbufs come from the specified mempool,
> > + * are direct and properly reinitialized (refcnt=1, next=NULL, nb_segs=1),
> > + * as done by rte_pktmbuf_prefree_seg().
> > + *
> > + * This function should be used with care, when optimization is required.
> > + * For standard needs, prefer rte_pktmbuf_reset().
> > + *
> > + * @param mp
> > + *   The mempool to which the mbuf belongs.
> > + * @param mbufs
> > + *   Array of pointers to packet mbufs.
> > + *   The array must not contain NULL pointers.
> > + * @param count
> > + *   Array size.
> > + */
> > +static inline void
> > +rte_mbuf_raw_reset_bulk(struct rte_mempool *mp, struct rte_mbuf **mbufs, unsigned int count)
> > +{
> > +	uint64_t ol_flags = (rte_pktmbuf_priv_flags(mp) & RTE_PKTMBUF_POOL_F_PINNED_EXT_BUF) ?
> > +			RTE_MBUF_F_EXTERNAL : 0;
> > +	uint16_t data_off = RTE_MIN_T(RTE_PKTMBUF_HEADROOM, rte_pktmbuf_data_room_size(mp),
> > +			uint16_t);
> > +
> > +	for (unsigned int idx = 0; idx < count; idx++) {
> > +		struct rte_mbuf *m = mbufs[idx];
> > +
> > +		m->pkt_len = 0;
> > +		m->tx_offload = 0;
> > +		m->vlan_tci = 0;
> > +		m->vlan_tci_outer = 0;
> > +		m->port = RTE_MBUF_PORT_INVALID;  
> 
> Have you considered doing all initialization using 64-bit stores? It's
> generally cheaper to do a single 64-bit store than e.g. set of 16-bit ones.
> This also means that we could remove the restriction on having refcnt and
> nb_segs already set. As in PMDs, a single store can init data_off, ref_cnt,
> nb_segs and port.
> 
> Similarly for packet_type and pkt_len, and data_len/vlan_tci and rss fields
> etc. For max performance, the whole of the mbuf cleared here can be done in
> 40 bytes, or 5 64-bit stores. If we do the stores in order, possibly the
> compiler can even opportunistically coalesce more stores, so we could even
> end up getting 128-bit or larger stores depending on the ISA compiled for.
> [Maybe the compiler will do this even if they are not in order, but I'd
> like to maximize my chances here! :-)]
> 
> /Bruce

Although it is possible to use less CPU instructions, the performance
limiting factor is which fields are in cache.