[PATCH 1/4] net/ark: add PCIe IDS for newly supported devices

[Ed Czeck]

Update documentation and release notes

Signed-off-by: Ed Czeck <ed.czeck at atomicrules.com>
---
 doc/guides/nics/ark.rst      | 5 +++++
 drivers/net/ark/ark_ethdev.c | 4 ++++
 2 files changed, 9 insertions(+)

diff --git a/doc/guides/nics/ark.rst b/doc/guides/nics/ark.rst
index 6aabde2ed5..1977f67e73 100644
--- a/doc/guides/nics/ark.rst
+++ b/doc/guides/nics/ark.rst
@@ -310,6 +310,10 @@ ARK PMD supports the following Arkville RTL PCIe instances including:
 * ``1d6c:1024`` - AR-TK242 [2x100GbE Packet Capture Device]
 * ``1d6c:1025`` - AR-TK242-FX2 [2x100GbE Gen5 Packet Capture Device]
 * ``1d6c:1026`` - AR-TK242-FX2 [1x200GbE Gen5 Packet Capture Device]
+* ``1d6c:102a`` - AR-TK242-FX2 [4x100GbE Gen5 Packet Capture Device]
+* ``1d6c:102b`` - AR-ARKV-FX1 [Arkville 128B DPDK Data Mover for Versal/CPM5]
+* ``1d6c:102c`` - AR-TK242-V80 [Gen5 PCAP Processor]
+* ``1d6c:102d`` - AR-TK242-FX2 [8x10GbE Gen5 Packet Capture-Replay Device]
 
 Arkville RTL Core Configurations
 --------------------------------
@@ -322,6 +326,7 @@ stream interfaces for both AMD/Xilinx and Intel FPGAs.
 
 * ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4)
 * ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5)
+* ARKV-FX1 - 1024-bit 128B datapath (AMD PCIe Versal, Gen5 )
 * ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only)
 
 DPDK and Arkville Firmware Versioning
diff --git a/drivers/net/ark/ark_ethdev.c b/drivers/net/ark/ark_ethdev.c
index c029dc46b3..d3fd76eec1 100644
--- a/drivers/net/ark/ark_ethdev.c
+++ b/drivers/net/ark/ark_ethdev.c
@@ -102,6 +102,10 @@ static const struct rte_pci_id pci_id_ark_map[] = {
 	{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1024)},
 	{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1025)},
 	{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1026)},
+	{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x102a)},
+	{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x102b)},
+	{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x102c)},
+	{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x102d)},
 	{.vendor_id = 0, /* sentinel */ },
 };
 
-- 
2.34.1