[PATCH v2 2/2] test/dma: add functions to verify zero and one fill

[Bruce Richardson]

On Mon, Jun 22, 2026 at 07:22:08PM +0530, Tejasree Kondoj wrote:
> Add test cases to verify zero fill and one fill
> 
> Signed-off-by: Vidya Sagar Velumuri <vvelumuri at marvell.com>
> Signed-off-by: Tejasree Kondoj <ktejasree at marvell.com>
> ---
>  app/test/test.h        |  4 +++
>  app/test/test_dmadev.c | 57 ++++++++++++++++++++++++------------------
>  2 files changed, 37 insertions(+), 24 deletions(-)
> 
Feedback on v1 of this patch is still relevant, please check my comments
there.
Additional comments inline below here too.

Thanks,
/Bruce

> diff --git a/app/test/test.h b/app/test/test.h
> index b29233bb32..d313300056 100644
> --- a/app/test/test.h
> +++ b/app/test/test.h
> @@ -34,6 +34,10 @@
>  
>  #include <rte_test.h>
>  
> +#ifndef ARRAY_SIZE
> +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))

This is the same as RTE_DIM.

> +#endif
> +
>  #define TEST_ASSERT RTE_TEST_ASSERT
>  
>  #define TEST_ASSERT_EQUAL RTE_TEST_ASSERT_EQUAL
> diff --git a/app/test/test_dmadev.c b/app/test/test_dmadev.c
> index b30f2214e5..d4299e501d 100644
> --- a/app/test/test_dmadev.c
> +++ b/app/test/test_dmadev.c
> @@ -931,42 +931,51 @@ test_completion_handling(int16_t dev_id, uint16_t vchan)
>  static int
>  test_enqueue_fill(int16_t dev_id, uint16_t vchan)
>  {
> +	uint64_t pattern[3] = {0x0, 0xfedcba9876543210, 0xffffffffffffffff};

You don't need to hard-code the 3, since you always compute the size. Copy
what is done with "lengths" below.

>  	const unsigned int lengths[] = {8, 64, 1024, 50, 100, 89};
> +	unsigned int i, j, k;
>  	struct rte_mbuf *dst;
>  	char *dst_data;
> -	uint64_t pattern = 0xfedcba9876543210;
> -	unsigned int i, j;
>  
>  	dst = rte_pktmbuf_alloc(pool);
>  	if (dst == NULL)
>  		ERR_RETURN("Failed to allocate mbuf\n");
>  	dst_data = rte_pktmbuf_mtod(dst, char *);
>  
> -	for (i = 0; i < RTE_DIM(lengths); i++) {
> -		/* reset dst_data */
> -		memset(dst_data, 0, rte_pktmbuf_data_len(dst));
> +	for (k = 0; k < ARRAY_SIZE(pattern); k++) {
> +		for (i = 0; i < RTE_DIM(lengths); i++) {
> +			/* reset dst_data */
> +			memset(dst_data, 0, rte_pktmbuf_data_len(dst));
> +
> +			/* perform the fill operation */
> +			int id = rte_dma_fill(dev_id, vchan, pattern[k],
> +					rte_pktmbuf_iova(dst), lengths[i], RTE_DMA_OP_FLAG_SUBMIT);
> +			if (id < 0) {
> +				if (id == -ENOTSUP) {
> +					rte_pktmbuf_free(dst);
> +					return 0;
> +				}
> +				ERR_RETURN("Error with rte_dma_fill\n");
> +			}
> +			await_hw(dev_id, vchan);
>  
> -		/* perform the fill operation */
> -		int id = rte_dma_fill(dev_id, vchan, pattern,
> -				rte_pktmbuf_iova(dst), lengths[i], RTE_DMA_OP_FLAG_SUBMIT);
> -		if (id < 0)
> -			ERR_RETURN("Error with rte_dma_fill\n");
> -		await_hw(dev_id, vchan);
> +			if (rte_dma_completed(dev_id, vchan, 1, NULL, NULL) != 1)
> +				ERR_RETURN("Error: fill operation failed (length: %u)\n",
> +					   lengths[i]);
> +			/* check the data from the fill operation is correct */
> +			for (j = 0; j < lengths[i]; j++) {
> +				char pat_byte = ((char *)&pattern[k])[j % 8];
>  
> -		if (rte_dma_completed(dev_id, vchan, 1, NULL, NULL) != 1)
> -			ERR_RETURN("Error: fill operation failed (length: %u)\n", lengths[i]);
> -		/* check the data from the fill operation is correct */
> -		for (j = 0; j < lengths[i]; j++) {
> -			char pat_byte = ((char *)&pattern)[j % 8];
> -			if (dst_data[j] != pat_byte)
> -				ERR_RETURN("Error with fill operation (lengths = %u): got (%x), not (%x)\n",
> -						lengths[i], dst_data[j], pat_byte);
> +				if (dst_data[j] != pat_byte)
> +					ERR_RETURN("Error with fill operation (lengths = %u): got (%x), not (%x)\n",
> +							lengths[i], dst_data[j], pat_byte);
> +			}
> +			/* check that the data after the fill operation was not written to */
> +			for (; j < rte_pktmbuf_data_len(dst); j++)
> +				if (dst_data[j] != 0)
> +					ERR_RETURN("Error, fill operation wrote too far (lengths = %u): got (%x), not (%x)\n",
> +							lengths[i], dst_data[j], 0);
>  		}
> -		/* check that the data after the fill operation was not written to */
> -		for (; j < rte_pktmbuf_data_len(dst); j++)
> -			if (dst_data[j] != 0)
> -				ERR_RETURN("Error, fill operation wrote too far (lengths = %u): got (%x), not (%x)\n",
> -						lengths[i], dst_data[j], 0);
>  	}
>  
>  	rte_pktmbuf_free(dst);
> -- 
> 2.34.1
>