[PATCH v3 04/10] power/acpi: remove redundant lcore ID checks
Huisong Li
lihuisong at huawei.com
Fri May 22 06:11:04 CEST 2026
Now that the cpufreq framework validates the lcore ID using
rte_lcore_is_eal_managed() before dispatching to any driver,
each individual cpufreq driver no longer needs its own range
check against RTE_MAX_LCORE.
Remove the duplicated lcore ID checks from the acpi cpufreq
driver ops.
Signed-off-by: Huisong Li <lihuisong at huawei.com>
---
drivers/power/acpi/acpi_cpufreq.c | 65 -------------------------------
1 file changed, 65 deletions(-)
diff --git a/drivers/power/acpi/acpi_cpufreq.c b/drivers/power/acpi/acpi_cpufreq.c
index 81a5e3f6ea..9c78b4cb1a 100644
--- a/drivers/power/acpi/acpi_cpufreq.c
+++ b/drivers/power/acpi/acpi_cpufreq.c
@@ -242,12 +242,6 @@ power_acpi_cpufreq_init(unsigned int lcore_id)
return -1;
}
- if (lcore_id >= RTE_MAX_LCORE) {
- POWER_LOG(ERR, "Lcore id %u can not exceeds %u",
- lcore_id, RTE_MAX_LCORE - 1U);
- return -1;
- }
-
pi = &lcore_power_info[lcore_id];
exp_state = POWER_IDLE;
/* The power in use state works as a guard variable between
@@ -319,11 +313,6 @@ power_acpi_cpufreq_exit(unsigned int lcore_id)
struct acpi_power_info *pi;
uint32_t exp_state;
- if (lcore_id >= RTE_MAX_LCORE) {
- POWER_LOG(ERR, "Lcore id %u can not exceeds %u",
- lcore_id, RTE_MAX_LCORE - 1U);
- return -1;
- }
pi = &lcore_power_info[lcore_id];
exp_state = POWER_USED;
/* The power in use state works as a guard variable between
@@ -373,11 +362,6 @@ power_acpi_cpufreq_freqs(unsigned int lcore_id, uint32_t *freqs, uint32_t num)
{
struct acpi_power_info *pi;
- if (lcore_id >= RTE_MAX_LCORE) {
- POWER_LOG(ERR, "Invalid lcore ID");
- return 0;
- }
-
if (freqs == NULL) {
POWER_LOG(ERR, "NULL buffer supplied");
return 0;
@@ -396,22 +380,12 @@ power_acpi_cpufreq_freqs(unsigned int lcore_id, uint32_t *freqs, uint32_t num)
uint32_t
power_acpi_cpufreq_get_freq(unsigned int lcore_id)
{
- if (lcore_id >= RTE_MAX_LCORE) {
- POWER_LOG(ERR, "Invalid lcore ID");
- return RTE_POWER_INVALID_FREQ_INDEX;
- }
-
return lcore_power_info[lcore_id].curr_idx;
}
int
power_acpi_cpufreq_set_freq(unsigned int lcore_id, uint32_t index)
{
- if (lcore_id >= RTE_MAX_LCORE) {
- POWER_LOG(ERR, "Invalid lcore ID");
- return -1;
- }
-
return set_freq_internal(&(lcore_power_info[lcore_id]), index);
}
@@ -420,11 +394,6 @@ power_acpi_cpufreq_freq_down(unsigned int lcore_id)
{
struct acpi_power_info *pi;
- if (lcore_id >= RTE_MAX_LCORE) {
- POWER_LOG(ERR, "Invalid lcore ID");
- return -1;
- }
-
pi = &lcore_power_info[lcore_id];
if (pi->curr_idx + 1 == pi->nb_freqs)
return 0;
@@ -438,11 +407,6 @@ power_acpi_cpufreq_freq_up(unsigned int lcore_id)
{
struct acpi_power_info *pi;
- if (lcore_id >= RTE_MAX_LCORE) {
- POWER_LOG(ERR, "Invalid lcore ID");
- return -1;
- }
-
pi = &lcore_power_info[lcore_id];
if (pi->curr_idx == 0 ||
(pi->curr_idx == 1 && pi->turbo_available && !pi->turbo_enable))
@@ -455,11 +419,6 @@ power_acpi_cpufreq_freq_up(unsigned int lcore_id)
int
power_acpi_cpufreq_freq_max(unsigned int lcore_id)
{
- if (lcore_id >= RTE_MAX_LCORE) {
- POWER_LOG(ERR, "Invalid lcore ID");
- return -1;
- }
-
/* Frequencies in the array are from high to low. */
if (lcore_power_info[lcore_id].turbo_available) {
if (lcore_power_info[lcore_id].turbo_enable)
@@ -479,11 +438,6 @@ power_acpi_cpufreq_freq_min(unsigned int lcore_id)
{
struct acpi_power_info *pi;
- if (lcore_id >= RTE_MAX_LCORE) {
- POWER_LOG(ERR, "Invalid lcore ID");
- return -1;
- }
-
pi = &lcore_power_info[lcore_id];
/* Frequencies in the array are from high to low. */
@@ -496,11 +450,6 @@ power_acpi_turbo_status(unsigned int lcore_id)
{
struct acpi_power_info *pi;
- if (lcore_id >= RTE_MAX_LCORE) {
- POWER_LOG(ERR, "Invalid lcore ID");
- return -1;
- }
-
pi = &lcore_power_info[lcore_id];
return pi->turbo_enable;
@@ -512,11 +461,6 @@ power_acpi_enable_turbo(unsigned int lcore_id)
{
struct acpi_power_info *pi;
- if (lcore_id >= RTE_MAX_LCORE) {
- POWER_LOG(ERR, "Invalid lcore ID");
- return -1;
- }
-
pi = &lcore_power_info[lcore_id];
if (pi->turbo_available)
@@ -545,11 +489,6 @@ power_acpi_disable_turbo(unsigned int lcore_id)
{
struct acpi_power_info *pi;
- if (lcore_id >= RTE_MAX_LCORE) {
- POWER_LOG(ERR, "Invalid lcore ID");
- return -1;
- }
-
pi = &lcore_power_info[lcore_id];
pi->turbo_enable = 0;
@@ -572,10 +511,6 @@ int power_acpi_get_capabilities(unsigned int lcore_id,
{
struct acpi_power_info *pi;
- if (lcore_id >= RTE_MAX_LCORE) {
- POWER_LOG(ERR, "Invalid lcore ID");
- return -1;
- }
if (caps == NULL) {
POWER_LOG(ERR, "Invalid argument");
return -1;
--
2.33.0
More information about the dev
mailing list