[PATCH v2 0/2] net/mlx5: improvements to link status handling
Stephen Hemminger
stephen at networkplumber.org
Wed Nov 4 08:29:26 CET 2026
On Tue, 3 Nov 2026 11:04:39 +0000
Dariusz Sosnowski <dsosnowski at nvidia.com> wrote:
> > -----Original Message-----
> > From: Stephen Hemminger <stephen at networkplumber.org>
> > Sent: Monday, November 2, 2026 9:08 AM
> > To: Dariusz Sosnowski <dsosnowski at nvidia.com>
> > Cc: Slava Ovsiienko <viacheslavo at nvidia.com>; Bing Zhao
> > <bingz at nvidia.com>; Ori Kam <orika at nvidia.com>; Suanming Mou
> > <suanmingm at nvidia.com>; Matan Azrad <matan at nvidia.com>;
> > dev at dpdk.org
> > Subject: Re: [PATCH v2 0/2] net/mlx5: improvements to link status handling
> >
> > On Fri, 30 Oct 2026 18:28:41 +0100
> > Dariusz Sosnowski <dsosnowski at nvidia.com> wrote:
> >
> > > This series is a result of splitting patch:
> > > https://patches.dpdk.org/project/dpdk/patch/20261026160400.1290443-1-
> > d
> > > sosnowski at nvidia.com/
> > >
> > > Patch 1 - Fix for mlx5 link update function to query current link
> > > carrier status, bypassing the delay introduced by linkwatch in Linux kernel.
> > >
> > > Patch 2 - Move to link status polling, in place of relying on netlink
> > > events which can be delayed by linkwatch for up to 1s.
> >
> > Instead of polling is there a way to get the lsc directly from devx or ibv on
> > mlx5? That would work around the issue and avoid the overhead.
>
> From DevX, unfortunately no.
>
> In ibv there are 2 options:
>
> - IBV_EVENT_PORT_ACTIVE/ERR - generated on up/down respectively;
> On ethernet devices, these are generated from netdev carrier state, so they are
> subjected to the same linkwatch delay.
>
> - IBV_EVENT_DEVICE_SPEED_CHANGE - generated on up and down;
> Is generated immediately on FW event reception.
> It is available from Linux kernel v7.0 and rdma-core v62.0.
>
> IBV_EVENT_DEVICE_SPEED_CHANGE would be ideal here,
> but there's no good way to discover whether currently running kernel supports it.
>
> Theoretically, this event was added alongside ibv_query_port_speed() IB verb.
> Following logic could be implemented (for DPDK compiled with recent rdma-core)
>
> - Call ibv_query_port_speed()
> - If error:
> - start listening on device speed change async event
> - on event: query link status of DPDK ports on that device
> - else if ENOTSUP:
> - start link status poll loop
>
> >
> > Long term, it would be good if kernel had sysctl to set linkwatch per interface
> > but it doesn't
I have a patch to allow link watch timeout to be set via netlink or sysfs.
But needs more testing. In future, mlx5 could detect and configure that.
More information about the dev
mailing list