[dts] Clarifications on setting up DUT

Ravi Kerur rkerur at gmail.com
Mon Jan 19 19:00:02 CET 2015


Hi Yong,

Thanks for the inputs, inline <rk>

On Mon, Jan 19, 2015 at 4:43 AM, Liu, Yong <yong.liu at intel.com> wrote:

> Hi Ravi,
> DTS can support i218 and i218 chipsets by add codename in setting.py and
> restore function in crb.py.
>
> For question 1, you can get system requirements from DTS getting started
> guide. Just enter folder doc/dts_gsg and then "make html" will generate it.
> Now ssh session is the only way for DTS to communicate with DUT and
> Tester. Restore interface function will re-insmod all nic in configuration
> file.
> We will support specified nic in near future.
>

<rk> I have made changes and done some basic testing which includes "1"
port only. Getting more than 2 ports is a bit taxing to me as I am an
individual  contributor and wanted to find a way to test with what I had. I
have made additional changes esp. handling cases to avoid error messages
seen in "dts.log" . Do you want me to send a patch to you along with
support added for I217 and i218?


> For question 2, the garbage message show that DTS not strip color. Here is
> one quick fix for it.
>
> diff --git a/framework/crb.py b/framework/crb.py
> index aca62c1..e5224c8 100644
> --- a/framework/crb.py
> +++ b/framework/crb.py
> @@ -226,7 +226,7 @@ class Crb(object):
>          """
>          Get interface name of specified pci device on linux.
>          """
> -        command = 'ls /sys/bus/pci/devices/0000:%s:%s/net' % (bus_id,
> devfun_id)
> +        command = 'ls --color=never /sys/bus/pci/devices/0000:%s:%s/net'
> % (bus_id, devfun_id)
>          return self.send_expect(command, '# ')
>
>
<rk> I will apply this patch, test it and let you know.


>      def get_interface_name_freebsd(self, bus_id, devfun_id):
>
> For question 3, DTS not scan ports normally, so you can try after fix
> issue 2.
>

<rk> Issue here was more delay needed for I217 ports to acquire v6
addresses after link up. If you are ok I can send a patch for this.

Thanks,
Ravi


>
> > -----Original Message-----
> > From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Ravi Kerur
> > Sent: Saturday, January 17, 2015 5:09 AM
> > To: dts at dpdk.org
> > Subject: [dts] Clarifications on setting up DUT
> >
> > DTS team,
> >
> > I am making changes to DTS to support i217, i218 chipsets to DTS and I
> > have couple of questions
> >
> > 1. Any README on system pre-requisites? Can I run DTS natively on DUT
> > without any SSH?
> >
> >  I have I217 and 82540EM NICs in a system running Ubuntu. I would like to
> > use both NIC's for testing. If I use regular method of SSH, I will loose
> > one NIC hence the question.
> >
> > 2. When I run DTS, for some of the commands I am getting garbage output.
> > The problem is seen on 2 Ubuntu systems. When I run those commands
> > manually commands work fine for e.g.
> >
> > *16/01/2015 12:58:00       DTS_TESTER_CMD: ls
> > /sys/bus/pci/devices/0000:00:19.0/net*
> >
> > *16/01/2015 12:58:00    DTS_TESTER_OUTPUT: ^[[0m^[[01;34meth0^[[0m*
> >
> > *16/01/2015 12:58:00       DTS_TESTER_CMD: Tester: [000:00:19.0
> 8086:15a1]
> > ^[[0m^[[01;34meth0^[[0m*
> >
> > *16/01/2015 12:58:00       DTS_TESTER_CMD: cat
> > /sys/bus/pci/devices/0000:00:19.0/net/^[[0m^[[01;34meth0^[[0m/address*
> >
> > *16/01/2015 12:58:00    DTS_TESTER_OUTPUT: cat:
> > /sys/bus/pci/devices/0000:00:19.0/net/m1: No such file or directory^M*
> >
> > *-bash: 34meth0m/address: No such file or directory*
> >
> > *16/01/2015 12:58:00       DTS_TESTER_CMD: ls
> > /sys/bus/pci/devices/0000:04:02.0/net*
> >
> > *16/01/2015 12:58:00    DTS_TESTER_OUTPUT: ^[[0m^[[01;34meth1^[[0m*
> >
> > *16/01/2015 12:58:00       DTS_TESTER_CMD: Tester: [000:04:02.0
> 8086:100e]
> > ^[[0m^[[01;34meth1^[[0m*
> >
> > *16/01/2015 12:58:00       DTS_TESTER_CMD: cat
> > /sys/bus/pci/devices/0000:04:02.0/net/^[[0m^[[01;34meth1^[[0m/address*
> >
> >
> > 3. Tests start failing with following msgs even though I217 NIC is
> > recognized.
> >
> > *Traceback (most recent call last):*
> >
> > *  File "/home/rkerur/dpdk-dts/dts/framework/dts.py", line 527, in
> > execute_test_setup_all*
> >
> > *    test_case.set_up_all()*
> >
> > *  File "../tests/TestSuite_whitelist.py", line 61, in set_up_all*
> >
> > *    self.verify(len(self.dutPorts) >= 1, "Insufficient ports")*
> >
> > *  File "/home/rkerur/dpdk-dts/dts/framework/test_case.py", line 62, in
> > verify*
> >
> > *    raise VerifyFailure(description)*
> >
> > *VerifyFailure: 'Insufficient ports'*
> >
> >
> >
> > *16/01/2015 12:58:23                 INFO:*
> >
> > *TEST SUITE ENDED: TestWhitelist*
> >
> >
> > Thanks,
> >
> > Ravi
>
>


More information about the dts mailing list