[dts] Clarifications on setting up DUT

Liu, Yong yong.liu at intel.com
Sun Jan 25 01:45:31 CET 2015


Ravi,
Thanks for your support. "support for DUT/Tester on same platform" will base on the patch set "[PATCH 0/4] Support additional port configuration file".
You can try this patch in your environment first.

From: Ravi Kerur [mailto:rkerur at gmail.com]
Sent: Saturday, January 24, 2015 8:58 AM
To: Liu, Yong
Cc: dts at dpdk.org
Subject: Re: [dts] Clarifications on setting up DUT

Hi Yong,
Thanks for the information.
Regarding support for DUT/Tester on same platform if you want me to test the patch or anything I can contribute to the development let me know.
Thanks,
Ravi

On Fri, Jan 23, 2015 at 6:18 AM, Liu, Yong <yong.liu at intel.com<mailto:yong.liu at intel.com>> wrote:
Hi Ravi,
Your patch has been applied in DTS. Thanks a lot.

And we just sent out one patch set which support manually configure DUT ports.
We have done some basic tests on it and I think it can be helpful on your first question.

We have planned to support DUT and Tester use the same platform soon. This will further reduce the requirements of running DTS.

Again, thanks for your input:)

From: Ravi Kerur [mailto:rkerur at gmail.com<mailto:rkerur at gmail.com>]
Sent: Tuesday, January 20, 2015 2:00 AM
To: Liu, Yong
Cc: dts at dpdk.org<mailto:dts at dpdk.org>
Subject: Re: [dts] Clarifications on setting up DUT

Hi Yong,
Thanks for the inputs, inline <rk>

On Mon, Jan 19, 2015 at 4:43 AM, Liu, Yong <yong.liu at intel.com<mailto:yong.liu at intel.com>> wrote:
Hi Ravi,
DTS can support i218 and i218 chipsets by add codename in setting.py and restore function in crb.py.

For question 1, you can get system requirements from DTS getting started guide. Just enter folder doc/dts_gsg and then "make html" will generate it.
Now ssh session is the only way for DTS to communicate with DUT and Tester. Restore interface function will re-insmod all nic in configuration file.
We will support specified nic in near future.

<rk> I have made changes and done some basic testing which includes "1" port only. Getting more than 2 ports is a bit taxing to me as I am an individual  contributor and wanted to find a way to test with what I had. I have made additional changes esp. handling cases to avoid error messages seen in "dts.log" . Do you want me to send a patch to you along with support added for I217 and i218?

For question 2, the garbage message show that DTS not strip color. Here is one quick fix for it.

diff --git a/framework/crb.py b/framework/crb.py
index aca62c1..e5224c8 100644
--- a/framework/crb.py
+++ b/framework/crb.py
@@ -226,7 +226,7 @@ class Crb(object):
         """
         Get interface name of specified pci device on linux.
         """
-        command = 'ls /sys/bus/pci/devices/0000:%s:%s/net' % (bus_id, devfun_id)
+        command = 'ls --color=never /sys/bus/pci/devices/0000:%s:%s/net' % (bus_id, devfun_id)
         return self.send_expect(command, '# ')

<rk> I will apply this patch, test it and let you know.

     def get_interface_name_freebsd(self, bus_id, devfun_id):

For question 3, DTS not scan ports normally, so you can try after fix issue 2.

<rk> Issue here was more delay needed for I217 ports to acquire v6 addresses after link up. If you are ok I can send a patch for this.
Thanks,
Ravi


> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org<mailto:dts-bounces at dpdk.org>] On Behalf Of Ravi Kerur
> Sent: Saturday, January 17, 2015 5:09 AM
> To: dts at dpdk.org<mailto:dts at dpdk.org>
> Subject: [dts] Clarifications on setting up DUT
>
> DTS team,
>
> I am making changes to DTS to support i217, i218 chipsets to DTS and I
> have couple of questions
>
> 1. Any README on system pre-requisites? Can I run DTS natively on DUT
> without any SSH?
>
>  I have I217 and 82540EM NICs in a system running Ubuntu. I would like to
> use both NIC's for testing. If I use regular method of SSH, I will loose
> one NIC hence the question.
>
> 2. When I run DTS, for some of the commands I am getting garbage output.
> The problem is seen on 2 Ubuntu systems. When I run those commands
> manually commands work fine for e.g.
>
> *16/01/2015 12:58:00       DTS_TESTER_CMD: ls
> /sys/bus/pci/devices/0000:00:19.0/net*
>
> *16/01/2015 12:58:00    DTS_TESTER_OUTPUT: ^[[0m^[[01;34meth0^[[0m*
>
> *16/01/2015 12:58:00       DTS_TESTER_CMD: Tester: [000:00:19.0 8086:15a1]
> ^[[0m^[[01;34meth0^[[0m*
>
> *16/01/2015 12:58:00       DTS_TESTER_CMD: cat
> /sys/bus/pci/devices/0000:00:19.0/net/^[[0m^[[01;34meth0^[[0m/address*
>
> *16/01/2015 12:58:00    DTS_TESTER_OUTPUT: cat:
> /sys/bus/pci/devices/0000:00:19.0/net/m1: No such file or directory^M*
>
> *-bash: 34meth0m/address: No such file or directory*
>
> *16/01/2015 12:58:00       DTS_TESTER_CMD: ls
> /sys/bus/pci/devices/0000:04:02.0/net*
>
> *16/01/2015 12:58:00    DTS_TESTER_OUTPUT: ^[[0m^[[01;34meth1^[[0m*
>
> *16/01/2015 12:58:00       DTS_TESTER_CMD: Tester: [000:04:02.0 8086:100e]
> ^[[0m^[[01;34meth1^[[0m*
>
> *16/01/2015 12:58:00       DTS_TESTER_CMD: cat
> /sys/bus/pci/devices/0000:04:02.0/net/^[[0m^[[01;34meth1^[[0m/address*
>
>
> 3. Tests start failing with following msgs even though I217 NIC is
> recognized.
>
> *Traceback (most recent call last):*
>
> *  File "/home/rkerur/dpdk-dts/dts/framework/dts.py", line 527, in
> execute_test_setup_all*
>
> *    test_case.set_up_all()*
>
> *  File "../tests/TestSuite_whitelist.py", line 61, in set_up_all*
>
> *    self.verify(len(self.dutPorts) >= 1, "Insufficient ports")*
>
> *  File "/home/rkerur/dpdk-dts/dts/framework/test_case.py", line 62, in
> verify*
>
> *    raise VerifyFailure(description)*
>
> *VerifyFailure: 'Insufficient ports'*
>
>
>
> *16/01/2015 12:58:23                 INFO:*
>
> *TEST SUITE ENDED: TestWhitelist*
>
>
> Thanks,
>
> Ravi




More information about the dts mailing list