[dts] [PATCH 2/2] test_plans: add test plan for Sageville etag feature

Marvin Liu yong.liu at intel.com
Thu Apr 21 04:59:50 CEST 2016


Signed-off-by: Marvin Liu <yong.liu at intel.com>

diff --git a/test_plans/etag_test_plan.rst b/test_plans/etag_test_plan.rst
new file mode 100644
index 0000000..3347020
--- /dev/null
+++ b/test_plans/etag_test_plan.rst
@@ -0,0 +1,139 @@
+.. Copyright (c) <2015>, Intel Corporation
+      All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+In some systems an additional external tag (E-tag) can be present before the
+VLAN. NIC X550 support VLANs in presence of external tags.
+E-tag mode is used for systems where the device adds a tag to identify a
+subsystem (usually a VM) and the near end switch adds a tag indicating the
+destination subsystem.
+
+The support of E-tag features by X550 consists in:
+- the filtering of received E-tag packets
+- E-tag header stripping by VF device in received packets
+- E-tag header insertion by VF device in transmitted packets
+- E-tag forwarding to assigned VF by E-tag id
+
+Prerequisites
+=============
+1. Create 2VF devices from PF device.
+    ./dpdk_nic_bind.py --st
+    0000:84:00.0 'Device 1563' drv=igb_uio unused=
+    echo 2 > /sys/bus/pci/devices/0000\:84\:00.0/max_vfs
+
+2. Detach VFs from the host, bind them to pci-stub driver,
+
+    /sbin/modprobe pci-stub
+
+    using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 1565",
+
+    echo "8086 1565" > /sys/bus/pci/drivers/pci-stub/new_id
+    echo 0000:84:10.0 > /sys/bus/pci/devices/0000:84:10.0/driver/unbind
+    echo 0000:84:10.0 > /sys/bus/pci/drivers/pci-stub/bind
+    echo 0000:84:10.2 > /sys/bus/pci/devices/0000:84:10.2/driver/unbind
+    echo 0000:84:10.2 > /sys/bus/pci/drivers/pci-stub/bind
+
+3. Passthrough VF 84:10.0 & 84:10.2 to vm0 and start vm0,
+
+    /usr/bin/qemu-system-x86_64  -name vm0 -enable-kvm \
+    -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \
+    -device pci-assign,host=84:10.0,id=pt_0 \
+    -device pci-assign,host=84:10.2,id=pt_1
+
+4. Login vm0 and them bind VF devices to igb_uio driver.
+
+    ./tools/dpdk_nic_bind.py --bind=igb_uio 00:04.0 00:05.0
+
+5. Start host testpmd, set it in rxonly mode and enable verbose output
+    testpmd -c f -n 3 -- -i
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+    testpmd> start
+    
+6. Start guest testpmd, set it in mac forward mode
+    testpmd -c 0x3 -n 1  -- -i  --txqflags=0x0
+    testpmd> set fwd mac
+    testpmd> start
+
+Test Case 1: L2 tunnel filter
+=============================
+Enable E-tag l2 tunnel support means enabling ability of parsing E-tag packet.
+This ability should be enabled before we enable filtering, forwarding,
+offloading for this specific type of tunnel.
+
+    testpmd> port config 0 l2-tunnel E-tag enable
+
+Send 802.1BR packet to PF and VFs, check packet normally recevied.
+   - type=0x893f - length=150 - nb_segs=1 - (outer) L2 type: Unknown
+   - (outer) L3 type: IPV4 - (outer) L4 type: UDP
+
+Test Case 2: E-tag filter
+=========================
+Enable E-tag packet forwarding and add E-tag on VF0, Send 802.1BR packet with
+broardcast mac and check packet only recevied on VF0
+
+    testpmd> E-tag set forwarding on port 0
+    testpmd> E-tag set filter add e-tag-id 1000 dst-pool 0 port 0
+
+Same E-tag forwarding to VF1, Send 802.1BR packet with broardcast mac and
+check packet only recevied on VF1
+
+    testpmd> E-tag set filter add e-tag-id 1000 dst-pool 1 port 0
+
+Same E-tag forwarding to PF0, Send 802.1BR packet with broardcast mac and
+check packet only recevied on PF
+
+    testpmd> E-tag set filter add e-tag-id 1000 dst-pool 2 port 0
+    
+Remove E-tag, Send 802.1BR packet with broardcast mac and check packet not
+recevied
+
+    testpmd> E-tag set filter del e-tag-id 1000 port 0
+
+Test Case 3: E-tag insertion
+============================
+Enable E-tag insertion in VF0, send normal packet to VF1 and check forwared
+packet contain E-tag
+
+    testpmd> E-tag set insertion on port-tag-id 1000 port 0 vf 0
+
+Test Case 4: E-tag strip
+=========================
+Enable E-tag strip on PF, Send 802.1BR packet to VF and check forwarded packet
+without E-tag.
+
+    testpmd> E-tag set stripping on port 0
+
+Disable E-tag strip on PF, Send 802.1BR packet and check forwarded packet with
+E-tag.
+
+    testpmd> E-tag set stripping off port 0
-- 
1.9.3



More information about the dts mailing list