[dts] [PATCH V1] tests: add test for vhost/virtio loopback performance

Liu, Yong yong.liu at intel.com
Wed Dec 28 06:28:13 CET 2016


Lei, some comments below.

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of lei,yao
> Sent: Thursday, December 22, 2016 11:29 AM
> To: dts at dpdk.org
> Cc: Yao, Lei A
> Subject: [dts] [PATCH V1] tests: add test for vhost/virtio loopback
> performance
> 
> From: lei yao <lei.a.yao at intel.com>
> 
> This test won't use qemu, but will use two testpmd thread to launch vhost-
> user and
> virtio-user to simulate the qemu user case.
> 
> Signed-off-by: lei yao <lei.a.yao at intel.com>
> ---
>  ...Suite_vhost_loopback_performance_virtio_user.py | 256
> +++++++++++++++++++++
>  1 file changed, 256 insertions(+)
>  create mode 100644
> tests/TestSuite_vhost_loopback_performance_virtio_user.py
> 
> diff --git a/tests/TestSuite_vhost_loopback_performance_virtio_user.py
> b/tests/TestSuite_vhost_loopback_performance_virtio_user.py
> new file mode 100644
> index 0000000..46d2110
> --- /dev/null
> +++ b/tests/TestSuite_vhost_loopback_performance_virtio_user.py
> @@ -0,0 +1,256 @@
> +#
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +#   * Redistributions of source code must retain the above copyright
> +#     notice, this list of conditions and the following disclaimer.
> +#   * Redistributions in binary form must reproduce the above copyright
> +#     notice, this list of conditions and the following disclaimer in
> +#     the documentation and/or other materials provided with the
> +#     distribution.
> +#   * Neither the name of Intel Corporation nor the names of its
> +#     contributors may be used to endorse or promote products derived
> +#     from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +
> +"""
> +DPDK Test suite.
> +Test Vhost loopback performance for Mergeable, normal , vector Path
> +"""
> +import string
> +import utils
> +import time
> +import re
> +from test_case import TestCase
> +
> +
> +class TestVhostLoopback(TestCase):
> +
> +    def set_up_all(self):
> +        """
> +        Run at the start of each test suite.
> +        """
> +        # Clean the execution environment
> +        self.dut.send_expect("rm -rf ./vhost.out", "#")
> +        self.dut.send_expect("rm -rf ./vhost-net*", "#")
> +        self.dut.send_expect("killall -s INT vhost-switch", "#")
> +        self.dut.send_expect("killall -s INT testpmd", "#")

Dpdk application will be automated killed by framework. There's no need to kill dpdk application in set_up_all function.

> +        self.header_row = ["FrameSize(B)", "Mode", "Throughput(Mpps)",
> "Virtio Version"]
> +        self.frame_sizes = [64, 128, 260, 520, 1024, 1500]
> +        self.test_cycles = {'Mpps': {}, 'pct': {}}
> +
> +    def set_up(self):
> +        """
> +        Run before each test case.
> +        """
> +        self.dut.restore_interfaces()
> +        pass

This is critical function which will bind all ports to default driver. 
You can use simple code like "port.bind_driver()" to bind port to default driver and "port.bind_driver(driver=self.drivername)" to igb_uio driver.
Just in this suite, I can't see any requirement to do this.

> +
> +    def test_perf_vhost_mergeable_loopback(self):
> +        """
> +        Benchmark performance for frame_sizes.
> +        """
> +
> +        # Modify the driver file to disbale the Mergeable, then re-
> compile the DPDK and back up the original driver file
> +        for frame_size in self.frame_sizes:
> +            # Back up the original driver file
> +
> self.dut.send_expect("cp ./drivers/net/virtio/virtio_ethdev.h ./", "#", 30)
> +            # Change the packet size sent by the testpmd
> +            self.change_testpmd_size = "sed -i -e 's/#define
> TXONLY_DEF_PACKET_LEN.*$/#define TXONLY_DEF_PACKET_LEN %d/' ./app/test-
> pmd/testpmd.h" % frame_size

If changed any code in testpmd, please restore it back for other suites may depend on that.

> +            self.dut.send_expect(self.change_testpmd_size, "#", 30)
> +            self.dut.build_install_dpdk(self.dut.target)
> +
> +            # Start the vhost user side
> +            cmd = self.target + "/app/testpmd -n 4 -c 0x03 " + \
> +                  "-m 2048 --file-prefix=vhost --vdev
> 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i"
> +            self.dut.send_expect(cmd, "testpmd>", 120)
> +            # Start the virtio_user side
> +            vhost_user = self.dut.new_session()
> +            command_line_user = self.target + "/app/testpmd -n 4 -c 0x0c
> " + \
> +                                " -m 2048 --no-pci --file-prefix=virtio "
> + \
> +                                " --
> vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net" + \
> +                                " -- -i --txqflags=0xf01 --disable-hw-
> vlan-filter"
> +
> +            vhost_user.send_expect(command_line_user, "testpmd>", 120)
> +
> +            self.dut.send_expect("set fwd mac retry", "testpmd>", 60)
> +            self.dut.send_expect("start tx_first 32", "testpmd>", 60)
> +            vhost_user.send_expect("start tx_first 32", "testpmd> ", 120)
> +            results = 0.0
> +            out = self.dut.send_expect("show port stats all", "testpmd>",
> 60)
> +            time.sleep(5)
> +            # Get throughput 10 times and calculate the average
> throughput
> +            for i in range(10):
> +                out = self.dut.send_expect("show port stats all",
> "testpmd>", 60)
> +                time.sleep(5)
> +                lines = re.search("Rx-pps:\s*(\d*)", out)
> +                result = lines.group(1)
> +                results += float(result)
> +            Mpps = results / (1000000 * 10)
> +            self.result_table_create(self.header_row)
> +
> +            self.dut.send_expect("quit", "#", 60)
> +            vhost_user.send_expect("quit", "#", 60)
> +            # Restore the driver file
> +            self.dut.send_expect("rm -
> rf ./drivers/net/virtio/virtio_ethdev.h", "#", 30)
> +
> self.dut.send_expect("mv ./virtio_ethdev.h ./drivers/net/virtio/", "#", 30)
> +            self.test_cycles['Mpps'][frame_size] = Mpps
> +            self.test_cycles['pct'][frame_size] = "Virtio 0.95"
> +
> +        for frame_size in self.frame_sizes:
> +            results_row = [frame_size]
> +            results_row.append("Mergeable on")
> +            results_row.append(self.test_cycles['Mpps'][frame_size])
> +            results_row.append(self.test_cycles['pct'][frame_size])
> +            self.result_table_add(results_row)
> +
> +        self.result_table_print()
> +
> +    def test_perf_vhost_vector_loopback(self):
> +        """
> +        Benchmark performance for frame_sizes.
> +        """
> +        for frame_size in self.frame_sizes:
> +            # Modify the driver file to disbale the Mergeable, then re-
> compile the DPDK and back up the original driver file
> +
> self.dut.send_expect("cp ./drivers/net/virtio/virtio_ethdev.h ./", "#", 30)
> +            self.dut.send_expect("sed -i
> '/VIRTIO_NET_F_MRG_RXBUF/d' ./drivers/net/virtio/virtio_ethdev.h", "#", 30)
> +            self.change_testpmd_size = "sed -i -e 's/#define
> TXONLY_DEF_PACKET_LEN .*$/#define TXONLY_DEF_PACKET_LEN %d/' ./app/test-
> pmd/testpmd.h" % frame_size

Same comments as previous.

> +            self.dut.send_expect(self.change_testpmd_size, "#", 30)
> +            self.dut.build_install_dpdk(self.dut.target)
> +
> +            # Start the vhost user side
> +            cmd = self.target + "/app/testpmd -n 4 -c 0x03 " + \
> +                  "-m 2048 --file-prefix=vhost --vdev
> 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i"
> +            self.dut.send_expect(cmd, "testpmd>", 120)
> +            # Start the virtio_user side
> +            vhost_user = self.dut.new_session()
> +            command_line_user = self.target + "/app/testpmd -n 4 -c 0x0c
> " + \
> +                                " -m 2048 --no-pci --file-prefix=virtio "
> + \
> +                                " --
> vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net " + \
> +                                " -- -i --txqflags=0xf01 --disable-hw-
> vlan-filter"
> +
> +            vhost_user.send_expect(command_line_user, "testpmd>", 120)
> +
> +            self.dut.send_expect("set fwd mac retry", "testpmd>", 60)
> +            self.dut.send_expect("start tx_first 32", "testpmd>", 60)
> +            vhost_user.send_expect("start tx_first 32", "testpmd> ", 120)
> +            results = 0.0
> +            out = self.dut.send_expect("show port stats all", "testpmd>",
> 60)
> +            time.sleep(5)
> +            # Get throughput 10 times and calculate the average
> throughput
> +            for i in range(10):
> +                out = self.dut.send_expect("show port stats all",
> "testpmd>", 60)
> +                time.sleep(5)
> +                lines = re.search("Rx-pps:\s*(\d*)", out)
> +                result = lines.group(1)
> +                results += float(result)
> +            Mpps = results / (1000000 * 10)
> +            self.result_table_create(self.header_row)

Code look like not aligned here, please check again.

> +
> +            self.dut.send_expect("quit", "#", 60)
> +            vhost_user.send_expect("quit", "#", 60)
> +            # Restore the driver file
> +            self.dut.send_expect("rm -
> rf ./drivers/net/virtio/virtio_ethdev.h", "#", 30)
> +
> self.dut.send_expect("mv ./virtio_ethdev.h ./drivers/net/virtio/", "#", 30)
> +            self.test_cycles['Mpps'][frame_size] = Mpps
> +            self.test_cycles['pct'][frame_size] = "Virtio 0.95"
> +
> +        for frame_size in self.frame_sizes:
> +            results_row = [frame_size]
> +            results_row.append("Vector on")
> +            results_row.append(self.test_cycles['Mpps'][frame_size])
> +            results_row.append(self.test_cycles['pct'][frame_size])
> +            self.result_table_add(results_row)
> +
> +        self.result_table_print()
> +
> +    def test_perf_vhost_normal_loopback(self):
> +        """
> +        Benchmark performance for frame_sizes.
> +        """
> +
> +        self.result_table_create(self.header_row)
> +        for frame_size in self.frame_sizes:
> +            # Modify the driver file to disbale the Mergeable, then re-
> compile the DPDK and back up the original driver file
> +
> self.dut.send_expect("cp ./drivers/net/virtio/virtio_ethdev.h ./", "#", 30)
> +            self.dut.send_expect("sed -i
> '/VIRTIO_NET_F_MRG_RXBUF/d' ./drivers/net/virtio/virtio_ethdev.h", "#", 30)
> +            self.change_testpmd_size = "sed -i -e 's/#define
> TXONLY_DEF_PACKET_LEN .*$/#define TXONLY_DEF_PACKET_LEN %d/' ./app/test-
> pmd/testpmd.h" % frame_size
> +            self.dut.send_expect(self.change_testpmd_size, "#", 30)
> +            self.dut.build_install_dpdk(self.dut.target)
> +
> +            # Start the vhost user side
> +            cmd = self.target + "/app/testpmd -n 4 -c 0x03 " + \
> +                  "-m 2048 --file-prefix=vhost --vdev
> 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i"
> +            self.dut.send_expect(cmd, "testpmd>", 120)
> +            # Start the virtio_user side
> +            vhost_user = self.dut.new_session()
> +            command_line_user = self.target + "/app/testpmd -n 4 -c 0x0c
> " + \
> +                                " -m 2048 --no-pci --file-prefix=virtio "
> + \
> +                                " --
> vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net" + \
> +                                " -- -i --txqflags=0xf00 --disable-hw-
> vlan-filter"
> +
> +            vhost_user.send_expect(command_line_user, "testpmd>", 120)
> +
> +            self.dut.send_expect("set fwd mac retry", "testpmd>", 60)
> +            self.dut.send_expect("start tx_first 32", "testpmd>", 60)
> +            vhost_user.send_expect("start tx_first 32", "testpmd> ", 120)
> +            results = 0.0
> +            out = self.dut.send_expect("show port stats all", "testpmd>",
> 60)
> +            time.sleep(5)
> +            # Get throughput 10 times and calculate the average
> throughput
> +            for i in range(10):
> +                out = self.dut.send_expect("show port stats all",
> "testpmd>", 60)
> +                time.sleep(5)
> +                lines = re.search("Rx-pps:\s*(\d*)", out)
> +                result = lines.group(1)
> +                results += float(result)
> +            Mpps = results / (1000000 * 10)
> +            self.result_table_create(self.header_row)
> +
> +            self.dut.send_expect("quit", "#", 60)
> +            vhost_user.send_expect("quit", "#", 60)
> +            # Restore the driver file
> +            self.dut.send_expect("rm -
> rf ./drivers/net/virtio/virtio_ethdev.h", "#", 30)
> +
> self.dut.send_expect("mv ./virtio_ethdev.h ./drivers/net/virtio/", "#", 30)
> +            self.test_cycles['Mpps'][frame_size] = Mpps
> +            self.test_cycles['pct'][frame_size] = "Virtio 0.95"
> +
> +        for frame_size in self.frame_sizes:
> +            results_row = [frame_size]
> +            results_row.append("Normal")
> +            results_row.append(self.test_cycles['Mpps'][frame_size])
> +            results_row.append(self.test_cycles['pct'][frame_size])
> +            self.result_table_add(results_row)
> +
> +        self.result_table_print()
> +
> +    def tear_down(self):
> +        """
> +        Run after each test case.
> +        """
> +        time.sleep(2)
> +
> +    def tear_down_all(self):
> +        """
> +        Run after each test suite.
> +        """
> +        # Recompile the dpdk because we change the source code during the
> test

Here need to restore default Tx packet size.

> +        self.dut.build_install_dpdk(self.dut.target)
> --
> 2.7.4



More information about the dts mailing list