[dts] [PATCH V1 1/3] add vf rss test plan

Pei, Yulong yulong.pei at intel.com
Wed Jan 13 07:24:32 CET 2016


Hi Huilong,

It seems that you also did not change the plan according to our discussion by telephone.

Best Regards
Yulong Pei

-----Original Message-----
From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of xu,huilong
Sent: Tuesday, January 12, 2016 6:53 PM
To: dts at dpdk.org
Subject: [dts] [PATCH V1 1/3] add vf rss test plan

Signed-off-by: xu,huilong <huilongx.xu at intel.com>
---
 test_plans/vf_rss_test_plan.rst | 182 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 182 insertions(+)
 create mode 100644 test_plans/vf_rss_test_plan.rst

diff --git a/test_plans/vf_rss_test_plan.rst b/test_plans/vf_rss_test_plan.rst new file mode 100644 index 0000000..f832924
--- /dev/null
+++ b/test_plans/vf_rss_test_plan.rst
@@ -0,0 +1,182 @@
+.. Copyright (c) <2016>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==================================================================
+Fortville RSS full support - Support configuring hash functions 
+==================================================================
+
+This document provides test plan for testing the function of Fortville:
+Support configuring hash functions.
+
+Prerequisites
+-------------
+
+2x Intel? 82599 (Niantic) NICs (2x 10GbE full duplex optical ports per 
+NIC) 1x Fortville_eagle NIC (4x 10G) 1x Fortville_spirit NIC (2x 40G) 
+2x Fortville_spirit_single NIC (1x 40G)
+
+The one port of the 82599 connect to the Fortville_eagle; The one port 
+of Fortville_spirit connect to Fortville_spirit_single.
+The three kinds of NICs are the target NICs. the connected NICs can 
+send packets to these three NICs using scapy.
+
+Network Traffic
+---------------
+
+The RSS feature is designed to improve networking performance by load 
+balancing the packets received from a NIC port to multiple NIC RX 
+queues, with each queue handled by a different logical core.
+
+#1. The receive packet is parsed into the header fields used by the 
+hash operation (such as IP addresses, TCP port, etc.)
+
+#2. A hash calculation is performed. The Fortville  supports four hash function:
+Toeplitz, simple XOR and their Symmetric RSS.
+
+#3. The seven LSBs of the hash result are used as an index into a 
+128/512 entry 'redirection table'.
+
+The RSS RETA update feature is designed to make RSS more flexible by 
+allowing users to define the correspondence between the seven LSBs of 
+hash result and the queue id(RSS output index) by themself.
+
+
+Test Case:  test_rss_hash
+========================================
+
+The following RX Ports/Queues configurations have to be benchmarked:
+
+- 1 RX port / 4 RX queues (1P/4Q)
+
+
+Testpmd configuration - 4 RX/TX queues per port 
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+::
+  
+  testpmd -c 1f -n 3  -- -i --rxq=4 --txq=4
+
+Testpmd Configuration Options
+-----------------------------
+
+By default, a single logical core runs the test.
+The CPU IDs and the number of logical cores running the test in 
+parallel can be manually set with the ``set corelist X,Y`` and the 
+``set nbcore N`` interactive commands of the ``testpmd`` application.
+#1. got the pci device id of DUT, for example,
+
+./dpdk_nic_bind.py --st
+
+0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 
+drv=i40e unused=
+0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 
+drv=i40e unused=
+
+#2. create 2 VFs from 2 PFs,
+
+echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/sriov_numvfs
+echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/sriov_numvfs
+./dpdk_nic_bind.py --st
+
+0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 
+drv=i40e unused=
+0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 
+drv=i40e unused=
+0000:81:02.0 'XL710/X710 Virtual Function' unused=
+0000:81:0a.0 'XL710/X710 Virtual Function' unused=
+
+#3. detach VFs from the host, bind them to pci-stub driver,
+
+/sbin/modprobe pci-stub
+
+using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 
+154c",
+
+echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
+echo 0000:81:02.0 > /sys/bus/pci/devices/0000:08:02.0/driver/unbind
+echo 0000:81:02.0 > /sys/bus/pci/drivers/pci-stub/bind
+
+echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
+echo 0000:81:0a.0 > /sys/bus/pci/devices/0000:08:0a.0/driver/unbind
+echo 0000:81:0a.0 > /sys/bus/pci/drivers/pci-stub/bind
+
+  or using the following more easy way,
+
+  virsh nodedev-detach pci_0000_81_02_0;  virsh nodedev-detach 
+ pci_0000_81_0a_0;
+
+  ./dpdk_nic_bind.py --st
+
+  0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 
+ drv=i40e unused=
+  0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 
+ drv=i40e unused=
+  0000:81:02.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
+  0000:81:0a.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
+
+  it can be seen that VFs 81:02.0 & 81:0a.0 's drv is pci-stub.
+
+#4. passthrough VFs 81:02.0 & 81:0a.0 to vm0, and start vm0,
+
+  /usr/bin/qemu-system-x86_64  -name vm0 -enable-kvm \  -cpu host -smp 
+ 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \  -device 
+ pci-assign,host=81:02.0,id=pt_0 \  -device 
+ pci-assign,host=81:0a.0,id=pt_1
+
+#5. login vm0, got VFs pci device id in vm0, assume they are 00:06.0 & 
+00:07.0, bind them to igb_uio driver, and then start testpmd, set it in 
+mac forward mode,
+
+./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
+
+#6. Reta Configuration.  128 reta entries configuration::
+
+  testpmd command: port config 0 rss reta (hash_index,queue_id)
+
+#7. PMD fwd only receive the packets::
+
+  testpmd command: set fwd rxonly
+
+#8. rss recived package type configuration two received packet types configuration::
+
+  testpmd command: port config 0 rss ip/udp/tcp
+
+#9. verbose configuration::
+
+  testpmd command: set verbose 8
+
+#10. start packet receive::
+
+  testpmd command: start
+#11. send packet and check rx port received packet by different queue.
+  different hash type send different packet, example hash type is ip, 
+packet src and dts ip not different
+  sendp([Ether(dst="90:e2:ba:36:99:3c")/IP(src="192.168.0.4", dst="192.168.0.5")], iface="eth3")
+  sendp([Ether(dst="90:e2:ba:36:99:3c")/IP(src="192.168.0.5", dst="192.168.0.4")], iface="eth3")   
+Test Case:  test_reta
+========================================
+   this case test hash reta table, the test steps same with 
+test_rss_hash except config hash reta table
+#1 before send packet, config hash reta,512(niantic nic have 128 reta) reta entries configuration::
+
+     testpmd command: port config 0 rss reta (hash_index,queue_id)
--
1.9.3



More information about the dts mailing list