[dts] [PATCH]tests vf_vlan: update vm cases
Liu, Yong
yong.liu at intel.com
Mon Mar 14 03:04:35 CET 2016
Lijuan, one comment below.
On 02/26/2016 10:29 AM, xu,huilong wrote:
> From: Lijuan Tu <lijuanx.a.tu at intel.com>
>
> 1. stop forwarding and then can start again
> 2. 'rx_vlan add 1 0' & 'tx_vlan set 0 %d' before testpmd send vlan packets
> 3. a little time wait after 'rx_vlan add %d 0'
> 4. fix vlan set strip on/off in for-cycle
>
> Signed-off-by: Lijuan Tu <lijuanx.a.tu at intel.com>
> ---
> tests/TestSuite_vf_vlan.py | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/tests/TestSuite_vf_vlan.py b/tests/TestSuite_vf_vlan.py
> index 6bde6ca..29890aa 100644
> --- a/tests/TestSuite_vf_vlan.py
> +++ b/tests/TestSuite_vf_vlan.py
> @@ -243,6 +243,7 @@ class TestVfVlan(TestCase):
> inst = sniff_packets(self.tester_intf0, timeout=5)
> self.vm0_testpmd.execute_cmd('set burst 1')
> self.vm0_testpmd.execute_cmd('start tx_first')
> + self.vm0_testpmd.execute_cmd('stop')
>
> # strip sniffered vlans
> pkts = load_sniff_packets(inst)
> @@ -265,6 +266,7 @@ class TestVfVlan(TestCase):
> self.vm0_testpmd.execute_cmd('set verbose 1')
>
> for tx_vlan in tx_vlans:
> + self.vm0_testpmd.execute_cmd('rx_vlan add %d 0' % tx_vlan)
Is this only for Fortville? If yes, please kdriver to distinguish.
> self.vm0_testpmd.execute_cmd('tx_vlan set 0 %d' % tx_vlan)
> self.tx_and_check(tx_vlan=tx_vlan)
>
> @@ -280,7 +282,7 @@ class TestVfVlan(TestCase):
> self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> self.vm0_testpmd.execute_cmd('set fwd rxonly')
> self.vm0_testpmd.execute_cmd('set verbose 1')
> - self.vm0_testpmd.execute_cmd('vlan set strip off 0')
> + self.vm0_testpmd.execute_cmd('vlan set strip on 0')
> self.vm0_testpmd.execute_cmd('start')
>
> # send packet without vlan
> @@ -295,6 +297,7 @@ class TestVfVlan(TestCase):
>
> for rx_vlan in rx_vlans:
> self.vm0_testpmd.execute_cmd('rx_vlan add %d 0' % rx_vlan)
> + time.sleep(1)
> # send packet with same vlan
> out = self.send_and_getout(vlan=rx_vlan, pkt_type="VLAN_UDP")
> vlan_hex = hex(rx_vlan)
> @@ -312,7 +315,7 @@ class TestVfVlan(TestCase):
> "received 1 packets" not in out, "Received filtered vlan packet!!!")
>
> for rx_vlan in rx_vlans:
> - self.vm0_testpmd.execute_cmd('rx_vlan rm 0 %d' % random_vlan)
> + self.vm0_testpmd.execute_cmd('rx_vlan rm 0 %d' % rx_vlan)
>
> # send packet with vlan 0
> out = self.send_and_getout(vlan=0, pkt_type="VLAN_UDP")
> @@ -341,11 +344,12 @@ class TestVfVlan(TestCase):
> self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> self.vm0_testpmd.execute_cmd('set fwd rxonly')
> self.vm0_testpmd.execute_cmd('set verbose 1')
> - self.vm0_testpmd.execute_cmd('vlan set strip on 0')
> self.vm0_testpmd.execute_cmd('start')
>
> for rx_vlan in rx_vlans:
> + self.vm0_testpmd.execute_cmd('vlan set strip on 0')
> self.vm0_testpmd.execute_cmd('rx_vlan add %d 0' % rx_vlan)
> + time.sleep(1)
> out = self.send_and_getout(vlan=rx_vlan, pkt_type="VLAN_UDP")
> # enable strip, vlan will be in mbuf
> vlan_hex = hex(rx_vlan)
More information about the dts
mailing list