[dts] [PATCH v3]tests vf_vlan: update vm cases

[Liu, Yong]

Applied. Thanks.

> -----Original Message-----
> From: Tu, LijuanX A
> Sent: Monday, March 14, 2016 1:03 PM
> To: Liu, Yong; dts at dpdk.org
> Cc: Tu, LijuanX A
> Subject: [dts][PATCH v3]tests vf_vlan: update vm cases
> 
> 1. stop forwarding and then can start again
> 2. for fortville ,"enabletx_vlan" must "enable rx_vlan" at same time
> 3. a little time waitafter 'rx_vlan add %d 0'
> 4. fix vlan set strip on/off in for-cycle
> 
> Signed-off-by: Lijuan Tu <lijuanx.a.tu at intel.com>
> ---
>  tests/TestSuite_vf_vlan.py | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/tests/TestSuite_vf_vlan.py b/tests/TestSuite_vf_vlan.py
> index 6bde6ca..0a0dbe1 100644
> --- a/tests/TestSuite_vf_vlan.py
> +++ b/tests/TestSuite_vf_vlan.py
> @@ -243,6 +243,7 @@ class TestVfVlan(TestCase):
>          inst = sniff_packets(self.tester_intf0, timeout=5)
>          self.vm0_testpmd.execute_cmd('set burst 1')
>          self.vm0_testpmd.execute_cmd('start tx_first')
> +        self.vm0_testpmd.execute_cmd('stop')
> 
>          # strip sniffered vlans
>          pkts = load_sniff_packets(inst)
> @@ -265,6 +266,11 @@ class TestVfVlan(TestCase):
>          self.vm0_testpmd.execute_cmd('set verbose 1')
> 
>          for tx_vlan in tx_vlans:
> +            # for fortville ,
> +            # if you want insert tx_vlan,
> +            # please enable rx_vlan at the same time
> +            if self.kdriver == "i40e":
> +                self.vm0_testpmd.execute_cmd('rx_vlan add %d 0' %
> tx_vlan)
>              self.vm0_testpmd.execute_cmd('tx_vlan set 0 %d' % tx_vlan)
>              self.tx_and_check(tx_vlan=tx_vlan)
> 
> @@ -280,7 +286,7 @@ class TestVfVlan(TestCase):
>          self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
>          self.vm0_testpmd.execute_cmd('set fwd rxonly')
>          self.vm0_testpmd.execute_cmd('set verbose 1')
> -        self.vm0_testpmd.execute_cmd('vlan set strip off 0')
> +        self.vm0_testpmd.execute_cmd('vlan set strip on 0')
>          self.vm0_testpmd.execute_cmd('start')
> 
>          # send packet without vlan
> @@ -295,6 +301,7 @@ class TestVfVlan(TestCase):
> 
>          for rx_vlan in rx_vlans:
>              self.vm0_testpmd.execute_cmd('rx_vlan add %d 0' % rx_vlan)
> +            time.sleep(1)
>              # send packet with same vlan
>              out = self.send_and_getout(vlan=rx_vlan, pkt_type="VLAN_UDP")
>              vlan_hex = hex(rx_vlan)
> @@ -312,7 +319,7 @@ class TestVfVlan(TestCase):
>                  "received 1 packets" not in out, "Received filtered vlan
> packet!!!")
> 
>          for rx_vlan in rx_vlans:
> -            self.vm0_testpmd.execute_cmd('rx_vlan rm 0 %d' % random_vlan)
> +            self.vm0_testpmd.execute_cmd('rx_vlan rm 0 %d' % rx_vlan)
> 
>          # send packet with vlan 0
>          out = self.send_and_getout(vlan=0, pkt_type="VLAN_UDP")
> @@ -341,11 +348,12 @@ class TestVfVlan(TestCase):
>          self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
>          self.vm0_testpmd.execute_cmd('set fwd rxonly')
>          self.vm0_testpmd.execute_cmd('set verbose 1')
> -        self.vm0_testpmd.execute_cmd('vlan set strip on 0')
>          self.vm0_testpmd.execute_cmd('start')
> 
>          for rx_vlan in rx_vlans:
> +            self.vm0_testpmd.execute_cmd('vlan set strip on 0')
>              self.vm0_testpmd.execute_cmd('rx_vlan add %d 0' % rx_vlan)
> +            time.sleep(1)
>              out = self.send_and_getout(vlan=rx_vlan, pkt_type="VLAN_UDP")
>              # enable strip, vlan will be in mbuf
>              vlan_hex = hex(rx_vlan)
> --
> 1.9.3