[dts] [PATCH v2 00/28] DTS support for Cavium NICs

[Liu, Yong]

Angela,
I would like to merge your patches. There're two patches look like the latter one will replace the previous one.
I can merge others first or waiting for next version with these two patches combined to one. Which choice is your preferred?

[dts] [PATCH v2 02/28] framework dut and project_dpdk: using correct available binding scripts
[dts] [PATCH v2 08/28] framework: getting DPDK binding script moved to a method in dut


Thanks,
Marvin

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Angela Czubak
> Sent: Tuesday, April 11, 2017 1:09 AM
> To: dts at dpdk.org
> Cc: Angela Czubak <aczubak at caviumnetworks.com>
> Subject: [dts] [PATCH v2 00/28] DTS support for Cavium NICs
> 
> Changes done to run DTS for Cavium NICs
> 
> 1) Cavium devices with 177d:a034 and 177d:0011 PCI IDs are added to NICs
> list, both of which are supported by thunder-nicvf driver
> 2) When appending pci devices info, the only Cavium NICs appended are the
> ones with 10Gb/s linkspeed
> 3) For arm64 architecture the hugepage size is detected and if it is
> 524288, then lesser amount of hugepages is acquired
> 4) Created a method in Dut class for getting the right binding script (if
> someone chooses to use older DPDK version)
> 5) Checking link is done via IPv4 ping alternately, so that DUT can be a
> system without IPv6 (previously link was detected solely by checking if an
> interface obtained an IPv6 address and then by using ping6). This also
> makes force binding necessary, as those interfaces are detected as active.
> 6) Checking whether vfio-pci was loaded using lsmod can be deceptive. If
> someone decides to use DPDK on a system with modules built into the kernel,
> then this approach will fail. Instead, DPDK binding script can be used and
> if it shows that vfio-pci can be used, DTS proceeds, otherwise it send
> with an error due to a failed assertion.
> 7) Modifying tests and config for Cavium NICs
> 8) Added support for Cavium NICs to choose only cards with specified
> linkspeed
> 9) Skipping recompling DPDK in TestSuite_pmd.py if the driver is not meant
> for FVL
> 
> Changes since initial version:
> - Added support for Cavium NICs to choose only cards with specified
> linkspeed
> - Skipping recompling DPDK in TestSuite_pmd.py if the driver is not meant
> for FVL
> - Setting max-pkt-len before setting vlan stripping off in
> TestSuite_shutdown_api.py when testing jumbo frames
> 
> 
> Angela Czubak (28):
>   framework settings: Adding cavium PCI IDs and drivers
>   framework dut and project_dpdk: using correct available binding
>     scripts
>   framework dut and project_dpdk: binding smaller number of hugepages
>     for     arm64
>   framework crb: Appending only 10G devices for cavium
>   framework project_dpdk: asserting loading vfio-pci by using DPDK
>     binding script
>   framework: checking link with IPv4 ping
>   tests: ipv4_reassembly - added splitting result in tcpdump_command
>   framework: getting DPDK binding script moved to a method in dut
>   tests: Modified tests to take cavium nics into account
>   tests: checksum_offload - fixes
>   tests: dynamic_config - taking into account cavium NICs
>   tests: fdir - skipping fdir tests for Cavium NICs
>   tests: ieee1588 - skipping ieee1588_enable test for Cavium NICs
>   tests: jumboframes - skipping jumboframes tests testing bigger than
>      allowed frames for Cavium NICs
>   tests: l2fwd - fixes to run on two cards (same NIC) and expecting
>     "L2FWD: entering main loop" instead of "memory mapped"
>   tests: link_status_interrupt - skipping
>     test_link_status_interrupt_port_available for Cavium NICs
>   tests: link_status_interrupt - skipping tests verifying adding MAC
>     addresses for Cavium NICs
>   tests: pmdpcap - modifying the right config file + importing utils
>     after scapy
>   tests: pmdrssreta - skipping tests for Cavium NICs
>   tests: queue_start_stop - taking into account cavium NICs
>   tests: quota_watermark - skipping tests for Cavium NICs
>   tests: short_live - taking into account cavium NICs + fixes
>   tests: tso - taking into account cavium NICs
>   tests: uni_pkt - taking into account cavium NICs
>   tests: unit_tests_dump - taking into account cavium NICs
>   tests: unit_tests_lpm - asking for lesser amount of hugepages if they
>        are 524288kB
>   framework: Adding linkspeed parameter for Cavium NICs
>   tests: pmd - Recompiling DPDK only if that is relevant
> 
>  conf/dpdk_support_test_case.xls     | Bin 25600 -> 8704 bytes
>  conf/dpdk_test_case_checklist.xls   | Bin 31232 -> 21504 bytes
>  doc/dts_gsg/config.rst              |   4 +
>  framework/crb.py                    |  12 +-
>  framework/dts.py                    |   5 +
>  framework/dut.py                    |  52 ++++++---
>  framework/pmd_output.py             |   4 +
>  framework/project_dpdk.py           |  18 ++-
>  framework/settings.py               |   5 +
>  framework/test_capabilities.py      |   9 ++
>  framework/test_case.py              |   7 +-
>  framework/tester.py                 |  11 ++
>  nics/net_device.py                  |   8 +-
>  tests/TestSuite_checksum_offload.py |  38 +++----
>  tests/TestSuite_dynamic_config.py   |  10 +-
>  tests/TestSuite_ipv4_reassembly.py  |   2 +-
>  tests/TestSuite_l2fwd.py            |   4 +-
>  tests/TestSuite_pmd.py              |   5 +-
>  tests/TestSuite_pmdpcap.py          |  13 ++-
>  tests/TestSuite_queue_start_stop.py |   5 +-
>  tests/TestSuite_short_live.py       |  44 ++++++--
>  tests/TestSuite_shutdown_api.py     |  31 ++---
>  tests/TestSuite_tso.py              |  10 +-
>  tests/TestSuite_uni_pkt.py          | 219 ++++++++++++++++++++++++-------
> -----
>  tests/TestSuite_unit_tests_dump.py  |  17 ++-
>  tests/TestSuite_unit_tests_lpm.py   |   9 +-
>  26 files changed, 383 insertions(+), 159 deletions(-)
>  create mode 100644 framework/test_capabilities.py
> 
> --
> 2.7.4