[dts] [PATCH V1] fix userspace failed case
Liu, Yong
yong.liu at intel.com
Thu Aug 24 05:50:49 CEST 2017
Thanks gang, few comments below.
> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of xu,gang
> Sent: Wednesday, August 23, 2017 5:02 PM
> To: dts at dpdk.org
> Cc: Xu, HuilongX <huilongx.xu at intel.com>
> Subject: [dts] [PATCH V1] fix userspace failed case
>
> From: "xu,huilong" <huilongx.xu at intel.com>
>
> update list:
> 1. update userspace example path for setup app
> 2. add sleep time for app update link status with fortville nic in port
> config case
> 3. dpdk userspace tools dump eeprom file size different kernel ethtools
> dump, so only compare same size bytes
> 4. use scapy tool send packet replace packet model, because app can't
> received packet by use packet model
>
> Signed-off-by: xu,huilong <huilongx.xu at intel.com>
> ---
> tests/TestSuite_userspace_ethtool.py | 16 ++++++++++++----
> 1 file changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/tests/TestSuite_userspace_ethtool.py
> b/tests/TestSuite_userspace_ethtool.py
> index 937a9e5..1b234c1 100644
> --- a/tests/TestSuite_userspace_ethtool.py
> +++ b/tests/TestSuite_userspace_ethtool.py
> @@ -61,7 +61,7 @@ class TestUserspaceEthtool(TestCase,
> IxiaPacketGenerator):
> self.verify("Error" not in out, "compilation error 1")
> self.verify("No such file" not in out, "compilation error 2")
>
> - path = "./examples/ethtool/ethtool-app/ethtool-app/%s/ethtool" %
> self.target
> + path = "./examples/ethtool/ethtool-app/%s/ethtool" % self.target
> self.cmd = "%s -c f -n %d" % (path,
> self.dut.get_memory_channels())
>
> # pause frame basic configuration
> @@ -370,7 +370,10 @@ class TestUserspaceEthtool(TestCase,
> IxiaPacketGenerator):
> self.dut.send_expect("ethtool --eeprom-dump %s raw on > %s" %
> (intf, ethtool_eeprom), "# ")
> # wait for file ready
> time.sleep(2)
> - portinfo['ethtool_eeprom'] = ethtool_eeprom
> + # dpdk userspace dump eeprom-dump size different with kernel
> ethtool dump eeprom-dump, so only compare same size bytes
> + dpdk_eeprom_size = int(self.dut.send_expect('ls -all %s' %
> portinfo['eeprom_file'], '# ').split(' ')[4].strip())
There is one more simple command to get file size.
"stat -c %s"
> + self.dut.send_expect('dd if=%s of=%s bs=%d count=1' %
> (ethtool_eeprom, "ethtool_eeprom_%d_cat.bin" % index, dpdk_eeprom_size),
> "#")
> + portinfo['ethtool_eeprom'] = "ethtool_eeprom_%d_cat.bin" %
> index
> # bind to original driver
> portinfo['net_dev'].bind_driver(portinfo['ori_driver'])
>
> @@ -394,10 +397,12 @@ class TestUserspaceEthtool(TestCase,
> IxiaPacketGenerator):
> rx_ring, _, tx_ring, _ = self.strip_ringparam(index)
> self.verify(rx_ring == rx_max, "Userspace tool failed to set
> Rx ring parameter")
> self.verify(tx_ring == tx_max, "Userspace tool failed to set
> Tx ring parameter")
> - pkt = Packet()
> tester_port = self.tester.get_local_port(port)
> intf = self.tester.get_interface(tester_port)
> - pkt.send_pkt(tx_port=intf)
> + # use scapy send packet, because example can't receive packet
> by packet model
> + packet =
> r'sendp([Ether(dst="ff:ff:ff:ff:ff:ff")/IP()/UDP()/Raw()], iface="%s")' %
> intf
> + self.tester.scapy_append(packet)
> + self.tester.scapy_execute()
The only difference I can see is the destination mac address.
Could you please try again with below code?
pkt.config_layer('ether', {'dst': 'ff:ff:ff:ff:ff:ff'})
> rx_pkts, tx_pkts = self.strip_portstats(index)
> self.verify(rx_pkts == ori_rx_pkts + 1, "Failed to forward
> after ring parameter changed")
> self.dut.send_expect("quit", "# ")
> @@ -499,8 +504,11 @@ class TestUserspaceEthtool(TestCase,
> IxiaPacketGenerator):
> for index in range(len(self.ports)):
> port = self.ports[index]
> ori_rx_pkts, _ = self.strip_portstats(index)
> + # add sleep time for example update port link status
> + time.sleep(10)
> # stop port
> self.dut.send_expect("stop %d" % index, "EthApp>")
> + time.sleep(10)
> # check packet not forwarded when port is stop
> pkt = Packet()
> tester_port = self.tester.get_local_port(port)
> --
> 1.9.3
More information about the dts
mailing list