[dts] [PATCH V1] fix link status interrupt failed case

Liu, Yong yong.liu at intel.com
Wed Aug 30 11:07:21 CEST 2017


Huilong,
Some comments and questions below.

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of xu,huilong
> Sent: Friday, August 25, 2017 3:12 PM
> To: dts at dpdk.org
> Cc: Xu, HuilongX <huilongx.xu at intel.com>
> Subject: [dts] [PATCH V1] fix link status interrupt failed case
> 
> update list:
> 1. update fortville nic test interrupt mode list
> 2. fix example setup failed
> 3. fix check port stats in example
> 4. fix check rx/tx packet get count number error
> 
> Signed-off-by: xu,huilong <huilongx.xu at intel.com>
> ---
>  tests/TestSuite_link_status_interrupt.py | 34 +++++++++++++++++++++++----
> -----
>  1 file changed, 25 insertions(+), 9 deletions(-)
> 
> diff --git a/tests/TestSuite_link_status_interrupt.py
> b/tests/TestSuite_link_status_interrupt.py
> index ae205cc..2249cf1 100644
> --- a/tests/TestSuite_link_status_interrupt.py
> +++ b/tests/TestSuite_link_status_interrupt.py
> @@ -61,6 +61,15 @@ class TestLinkStatusInterrupt(TestCase):
>          out = self.dut.build_dpdk_apps("./examples/link_status_interrupt")
>          self.verify("Error" not in out, "compilation error 1")
>          self.verify("No such file" not in out, "compilation error 2")
> +        # fortville NIC not support legacy intr mode
> +        if self.nic in ["fortville_eagle", "fortville_spirit",
> +                        "fortville_spirt_single", "fortville_25g"]:
> +            self.basic_intr_mode = ["msix"]
> +        else:
> +            self.basic_intr_mode = ["msix", "legacy"]
> +        # vfio support msi intr mode
> +        if self.drivername == "vfio-pci":
> +            self.basic_intr_mode.append("msi")


Please add link of dpdk release note in the commit log.

> 
>      def set_link_status_and_verify(self, dutPort, status):
>          """
> @@ -71,7 +80,9 @@ class TestLinkStatusInterrupt(TestCase):
>          self.tester.send_expect("ifconfig %s %s" %
>                                  (self.intf, status.lower()), "# ", 10)
>          verify_point = "Port %s Link %s" % (dutPort, status)
> -        self.dut.send_expect("", verify_point, 60)
> +
> +        out = self.dut.get_session_output(timeout=60)
> +        self.verify(verify_point in out,"link status update error")
> 
>      def set_up(self):
>          """
> @@ -86,20 +97,23 @@ class TestLinkStatusInterrupt(TestCase):
>          if self.drivername == "igb_uio":
>              cmdline = self.path + " -c %s -n %s -- -p %s " % (
>                  self.coremask, self.dut.get_memory_channels(),
> self.portmask)
> -            for mode in ["legacy", "msix"]:
> +            for mode in self.basic_intr_mode:
>                  self.dut.send_expect("rmmod -f igb_uio", "#", 20)
>                  self.dut.send_expect(
>                      'insmod %s/kmod/igb_uio.ko "intr_mode=%s"' %
> (self.target, mode), "# ")
>                  self.dut.bind_interfaces_linux()
> -                self.dut.send_expect(cmdline, "Aggregate statistics", 60)
> +                self.dut.send_expect(cmdline, "", 180)

If there's nothing to check in output, you can use function "self.dut.send_command(timeout=time)".
And 180 seconds is too long, what is waiting for?

> +                out = self.dut.get_session_output(timeout=60)

Function "get_session_output" just return all output after timeout. Normally we will use default value, why enlarge time out value to 60 seconds?

> +                self.verify("Port statistics" in out, "setup example
> error")
> +                time.sleep(10)
>                  self.set_link_status_and_verify(self.dut_ports[0], 'Down')
>                  self.set_link_status_and_verify(self.dut_ports[0], 'Up')
>                  self.dut.send_expect("^C", "#", 60)
>          elif self.drivername == "vfio-pci":
> -            for mode in ["legacy", "msi", "msix"]:
> +            for mode in self.basic_intr_mode :

Pep issue here, please modify it.

>                  cmdline = self.path + " -c %s -n %s --vfio-intr=%s -- -
> p %s" % (
>                      self.coremask, self.dut.get_memory_channels(), mode,
> self.portmask)
> -                self.dut.send_expect(cmdline, "Aggregate statistics", 60)
> +                self.dut.send_expect(cmdline, "statistics statistics",
> 120)


A bit tricky here, why double "statistics" here?

>                  self.set_link_status_and_verify(self.dut_ports[0], 'Down')
>                  self.set_link_status_and_verify(self.dut_ports[0], 'Up')
>                  self.dut.send_expect("^C", "#", 60)
> @@ -112,7 +126,7 @@ class TestLinkStatusInterrupt(TestCase):
>          if self.drivername == "igb_uio":
>              cmdline = self.path + " -c %s -n %s -- -p %s " % (
>                  self.coremask, self.dut.get_memory_channels(),
> self.portmask)
> -            for mode in ["legacy", "msix"]:
> +            for mode in self.basic_intr_mode:
>                  self.dut.send_expect("rmmod -f igb_uio", "#", 20)
>                  self.dut.send_expect(
>                      'insmod %s/kmod/igb_uio.ko "intr_mode=%s"' %
> (self.target, mode), "# ")
> @@ -129,11 +143,12 @@ class TestLinkStatusInterrupt(TestCase):
>                  pkt_send = re.findall("Total packets sent:\s*(\d*)", out)
>                  pkt_received = re.findall(
>                      "Total packets received:\s*(\d*)", out)
> -                self.verify(pkt_send == pkt_received == '1',
> +                # example will print rx/tx packet info by loop so only
> check last one
> +                self.verify(pkt_send[-1] == pkt_received[-1] == '1',
>                              "Error: sent packets != received packets")
>                  self.dut.send_expect("^C", "#", 60)
>          elif self.drivername == "vfio-pci":
> -            for mode in ["legacy", "msi", "msix"]:
> +            for mode in self.basic_intr_mode:
>                  cmdline = self.path + " -c %s -n %s --vfio-intr=%s -- -
> p %s" % (
>                      self.coremask, self.dut.get_memory_channels(), mode,
> self.portmask)
>                  self.dut.send_expect(cmdline, "Aggregate statistics", 60)
> @@ -148,7 +163,8 @@ class TestLinkStatusInterrupt(TestCase):
>                  pkt_send = re.findall("Total packets sent:\s*(\d*)", out)
>                  pkt_received = re.findall(
>                      "Total packets received:\s*(\d*)", out)
> -                self.verify(pkt_send == pkt_received == '1',
> +                # example will print rx/tx packet info by loop so only
> check last one
> +                self.verify(pkt_send[-1] == pkt_received[-1] == '1',
>                              "Error: sent packets != received packets")
>                  self.dut.send_expect("^C", "#", 60)
> 
> --
> 1.9.3



More information about the dts mailing list