[dts] Minimum Tester/DUT configuration

john miller john.miller at atomicrules.com
Wed Jan 25 04:19:41 CET 2017


I meant the head of DPDK. So we are using the latest code for both DTS and DPDK.


> On Jan 24, 2017, at 10:08 PM, john miller <john.miller at atomicrules.com> wrote:
> 
> Hi Marvin,
> 
> I think we have that configured correctly, here is the output from the test.  We are using the latest code at the head of DTS which i s v17.02.
> 
> DTS_DUT_CMD: [192.168.0.34] usertools/dpdk-devbind.py --bind=igb_uio 0000:02:00.0 0000:02:00.1 0000:02:00.2 0000:02:00.3 
> 
> -John
> 
> 
> 
>> On Jan 24, 2017, at 9:59 PM, Liu, Yong <yong.liu at intel.com <mailto:yong.liu at intel.com>> wrote:
>> 
>> Hi John,
>> In the DTS execution process, we will bind configured ports to igb_uio by the tool named dpdk-devbind.
>> This tool’s location changed to folder usertools recently. So if you are not using v17.02, may encounter this issue.
>>  
>> usertools/dpdk-devbind.py --bind=igb_uio 0000:02:00.0 0000:02:00.1 0000:02:00.2 0000:02:00.3 
>>  
>> Thanks,
>> Marvin
>>  
>> From: john miller [mailto:john.miller at atomicrules.com <mailto:john.miller at atomicrules.com>] 
>> Sent: Wednesday, January 25, 2017 12:11 AM
>> To: Liu, Yong <yong.liu at intel.com <mailto:yong.liu at intel.com>>
>> Cc: dts at dpdk.org <mailto:dts at dpdk.org>
>> Subject: Re: [dts] Minimum Tester/DUT configuration
>>  
>> Thank you for your response.
>>  
>> We have updated our tester and DUT configuration.  We have 2 Fortville eagles in our tester and 1 Fortville spirit configured as a 4x10 in our DUT.  We have link on all 4 ports.
>>  
>> We are trying to run the l2fwd DTS test and we get this error.
>>  
>> "EAL: Error - exiting with code: 1
>>   Cause: No Ethernet ports - bye”
>> 
>> 
>>  
>> The complete output is shown below.  I searched the forums for this error and got a few hits but none of the matching threads seemed like what we are experiencing.  Could you help us isolate this issue ?
>>  
>> Thank you,
>> -John
>>  
>>  
>>  
>>  
>> DUT 192.168.0.34
>>                 INFO: ssh root at 192.168.0.36 <mailto:root at 192.168.0.36>
>>                 INFO: ssh root at 192.168.0.36 <mailto:root at 192.168.0.36>
>>                 INFO: ssh root at 192.168.0.34 <mailto:root at 192.168.0.34>
>>                 INFO: ssh root at 192.168.0.34 <mailto:root at 192.168.0.34>
>>                 INFO: CACHE: Cache will not be read.
>>                 INFO: SKIP: The DPDK setup steps will be executed.
>>       DTS_TESTER_CMD: scp -v dep/tgen.tgz root at 192.168.0.36 <mailto:root at 192.168.0.36>:~/
>>       DTS_TESTER_CMD: scp -v dep/tclclient.tgz root at 192.168.0.36 <mailto:root at 192.168.0.36>:~/
>>       DTS_TESTER_CMD: tar zxf tgen.tgz
>>       DTS_TESTER_CMD: tar zxf tclclient.tgz
>>       DTS_TESTER_CMD: modprobe uio
>>       DTS_TESTER_CMD: modprobe igb
>>       DTS_TESTER_CMD: modprobe ixgbe
>>       DTS_TESTER_CMD: modprobe e1000e
>>       DTS_TESTER_CMD: modprobe e1000
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:00\:19.0/vendor
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:00\:19.0/device
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:00\:19.0/vendor
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:00\:19.0/device
>>       DTS_TESTER_CMD: ifconfig eno1 up
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:01\:00.0/vendor
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:01\:00.0/device
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:01\:00.0/vendor
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:01\:00.0/device
>>       DTS_TESTER_CMD: ifconfig enp1s0f0 up
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:01\:00.1/vendor
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:01\:00.1/device
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:01\:00.1/vendor
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:01\:00.1/device
>>       DTS_TESTER_CMD: ifconfig enp1s0f1 up
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:02\:00.0/vendor
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:02\:00.0/device
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:02\:00.0/vendor
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:02\:00.0/device
>>       DTS_TESTER_CMD: ifconfig enp2s0f0 up
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:02\:00.1/vendor
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:02\:00.1/device
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:02\:00.1/vendor
>>       DTS_TESTER_CMD: cat /sys/bus/pci/devices/0000\:02\:00.1/device
>>       DTS_TESTER_CMD: ifconfig enp2s0f1 up
>>       DTS_TESTER_CMD: Tester: [0000:00:19.0 8086:1503] unknow_nic
>>       DTS_TESTER_CMD: Tester: [0000:01:00.0 8086:1572] enp1s0f0
>>       DTS_TESTER_CMD: Tester: [0000:01:00.1 8086:1572] enp1s0f1
>>       DTS_TESTER_CMD: Tester: [0000:02:00.0 8086:1572] enp2s0f0
>>       DTS_TESTER_CMD: Tester: [0000:02:00.1 8086:1572] enp2s0f1
>>       DTS_TESTER_CMD: {'intf': 'enp1s0f0', 'mac': '3c:fd:fe:9c:c3:4c', 'pci': '0000:01:00.0', 'ipv6': 'fe80::23af:6b1b:3fca:fe8a', 'type': '8086:1572', 'port': <net_device.NetDevice object at 0x7f5c8f549cd0>}
>>       DTS_TESTER_CMD: {'intf': 'enp1s0f1', 'mac': '3c:fd:fe:9c:c3:4d', 'pci': '0000:01:00.1', 'ipv6': 'fe80::2e0:6ec:56c9:1b3', 'type': '8086:1572', 'port': <net_device.NetDevice object at 0x7f5c8f571110>}
>>       DTS_TESTER_CMD: {'intf': 'enp2s0f0', 'mac': '3c:fd:fe:9e:11:c0', 'pci': '0000:02:00.0', 'ipv6': 'fe80::27d1:7383:502b:2486', 'type': '8086:1572', 'port': <net_device.NetDevice object at 0x7f5c8f549e90>}
>>       DTS_TESTER_CMD: {'intf': 'enp2s0f1', 'mac': '3c:fd:fe:9e:11:c1', 'pci': '0000:02:00.1', 'ipv6': 'fe80::b4d0:ec1f:fe29:687f', 'type': '8086:1572', 'port': <net_device.NetDevice object at 0x7f5c8f549c90>}
>>          DTS_DUT_CMD: [192.168.0.34] ls /tmp/ && cd ~
>>          DTS_DUT_CMD: [192.168.0.34] scp -v dep/dpdk.tar.gz root at 192.168.0.34 <mailto:root at 192.168.0.34>:/tmp/
>>          DTS_DUT_CMD: [192.168.0.34] ulimit -c unlimited
>>          DTS_DUT_CMD: [192.168.0.34] rm -rf ~/dpdk
>>          DTS_DUT_CMD: [192.168.0.34] tar zxf /tmp/dpdk.tar.gz -C ~
>>          DTS_DUT_CMD: [192.168.0.34] ls ~/dpdk
>>          DTS_DUT_CMD: [192.168.0.34] cd ~/dpdk
>>          DTS_DUT_CMD: [192.168.0.34] alias ls='ls --color=none'
>>          DTS_DUT_CMD: [192.168.0.34] DUT: [0000:00:1f.6 8086:15b8] Skipped: Unknown/not selected
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.0/vendor
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.0/device
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.0/vendor
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.0/device
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.1/vendor
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.1/device
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.1/vendor
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.1/device
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.2/vendor
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.2/device
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.2/vendor
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.2/device
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.3/vendor
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.3/device
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.3/vendor
>>          DTS_DUT_CMD: [192.168.0.34] cat /sys/bus/pci/devices/0000\:02\:00.3/device
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.0 > /sys/bus/pci/devices/0000\:02\:00.0/driver/unbind
>>          DTS_DUT_CMD: [192.168.0.34] modprobe i40e
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.0 > /sys/bus/pci/drivers/i40e/bind
>>          DTS_DUT_CMD: [192.168.0.34] ifconfig eth6 up
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.1 > /sys/bus/pci/devices/0000\:02\:00.1/driver/unbind
>>          DTS_DUT_CMD: [192.168.0.34] modprobe i40e
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.1 > /sys/bus/pci/drivers/i40e/bind
>>          DTS_DUT_CMD: [192.168.0.34] ifconfig eth5 up
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.2 > /sys/bus/pci/devices/0000\:02\:00.2/driver/unbind
>>          DTS_DUT_CMD: [192.168.0.34] modprobe i40e
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.2 > /sys/bus/pci/drivers/i40e/bind
>>          DTS_DUT_CMD: [192.168.0.34] ifconfig eth7 up
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.3 > /sys/bus/pci/devices/0000\:02\:00.3/driver/unbind
>>          DTS_DUT_CMD: [192.168.0.34] modprobe i40e
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.3 > /sys/bus/pci/drivers/i40e/bind
>>          DTS_DUT_CMD: [192.168.0.34] ifconfig eth8 up
>>          DTS_DUT_CMD: [192.168.0.34] ip link show eth6
>>          DTS_DUT_CMD: [192.168.0.34] ip -family inet6 address show dev eth6 | awk '/inet6/ { print $2 }'
>>          DTS_DUT_CMD: [192.168.0.34] ip link show eth5
>>          DTS_DUT_CMD: [192.168.0.34] ip -family inet6 address show dev eth5 | awk '/inet6/ { print $2 }'
>>          DTS_DUT_CMD: [192.168.0.34] ip link show eth7
>>          DTS_DUT_CMD: [192.168.0.34] ip -family inet6 address show dev eth7 | awk '/inet6/ { print $2 }'
>>          DTS_DUT_CMD: [192.168.0.34] ip link show eth8
>>          DTS_DUT_CMD: [192.168.0.34] ip -family inet6 address show dev eth8 | awk '/inet6/ { print $2 }'
>>       DTS_TESTER_CMD: ping6 -w 5 -c 5 -A fe80::3efd:feff:fea0:fbc0%enp1s0f0
>>       DTS_TESTER_CMD: ping6 -w 5 -c 5 -A fe80::3efd:feff:fea0:fbc0%enp1s0f1
>>       DTS_TESTER_CMD: ping6 -w 5 -c 5 -A fe80::3efd:feff:fea0:fbc0%enp2s0f0
>>       DTS_TESTER_CMD: ping6 -w 5 -c 5 -A fe80::3efd:feff:fea0:fbc0%enp2s0f1
>>          DTS_DUT_CMD: [192.168.0.34] PORT MAP: [dut 0: tester 3]
>>       DTS_TESTER_CMD: ping6 -w 5 -c 5 -A fe80::3efd:feff:fea0:fbc1%enp1s0f0
>>       DTS_TESTER_CMD: ping6 -w 5 -c 5 -A fe80::3efd:feff:fea0:fbc1%enp1s0f1
>>       DTS_TESTER_CMD: ping6 -w 5 -c 5 -A fe80::3efd:feff:fea0:fbc1%enp2s0f0
>>          DTS_DUT_CMD: [192.168.0.34] PORT MAP: [dut 1: tester 2]
>>       DTS_TESTER_CMD: ping6 -w 5 -c 5 -A fe80::3efd:feff:fea0:fbc2%enp1s0f0
>>       DTS_TESTER_CMD: ping6 -w 5 -c 5 -A fe80::3efd:feff:fea0:fbc2%enp1s0f1
>>          DTS_DUT_CMD: [192.168.0.34] PORT MAP: [dut 2: tester 1]
>>       DTS_TESTER_CMD: ping6 -w 5 -c 5 -A fe80::3efd:feff:fea0:fbc3%enp1s0f0
>>          DTS_DUT_CMD: [192.168.0.34] PORT MAP: [dut 3: tester 0]
>>       DTS_DUT_RESULT: [192.168.0.34] DUT PORT MAP: [3, 2, 1, 0]
>>          DTS_DUT_CMD: [192.168.0.34] {'intf': 'eth6', 'mac': '3c:fd:fe:a0:fb:c0', 'pci': '0000:02:00.0', 'numa': -1, 'ipv6': 'fe80::3efd:feff:fea0:fbc0', 'type': '8086:1583', 'port': <net_device.NetDevice object at 0x7f5c8f571650>}
>>          DTS_DUT_CMD: [192.168.0.34] {'intf': 'eth5', 'mac': '3c:fd:fe:a0:fb:c1', 'pci': '0000:02:00.1', 'numa': -1, 'ipv6': 'fe80::3efd:feff:fea0:fbc1', 'type': '8086:1583', 'port': <net_device.NetDevice object at 0x7f5c8f571950>}
>>          DTS_DUT_CMD: [192.168.0.34] {'intf': 'eth7', 'mac': '3c:fd:fe:a0:fb:c2', 'pci': '0000:02:00.2', 'numa': -1, 'ipv6': 'fe80::3efd:feff:fea0:fbc2', 'type': '8086:1583', 'port': <net_device.NetDevice object at 0x7f5c8f571a50>}
>>          DTS_DUT_CMD: [192.168.0.34] {'intf': 'eth8', 'mac': '3c:fd:fe:a0:fb:c3', 'pci': '0000:02:00.3', 'numa': -1, 'ipv6': 'fe80::3efd:feff:fea0:fbc3', 'type': '8086:1583', 'port': <net_device.NetDevice object at 0x7f5c8f571150>}
>>                 INFO: 
>> TARGET x86_64-native-linuxapp-gcc
>>          DTS_DUT_CMD: [192.168.0.34] export RTE_TARGET=x86_64-native-linuxapp-gcc
>>          DTS_DUT_CMD: [192.168.0.34] export RTE_SDK=`pwd`
>>          DTS_DUT_CMD: [192.168.0.34] rm -rf x86_64-native-linuxapp-gcc
>>          DTS_DUT_CMD: [192.168.0.34] rm -rf ./app/test/test_resource_c.res.o
>>          DTS_DUT_CMD: [192.168.0.34] rm -rf ./app/test/test_resource_tar.res.o
>>          DTS_DUT_CMD: [192.168.0.34] rm -rf ./app/test/test_pci_sysfs.res.o
>>          DTS_DUT_CMD: [192.168.0.34] make -j install T=x86_64-native-linuxapp-gcc 
>>          DTS_DUT_CMD: [192.168.0.34] awk '/Hugepagesize/ {print $2}' /proc/meminfo
>>          DTS_DUT_CMD: [192.168.0.34] awk '/Hugepagesize/ {print $2}' /proc/meminfo
>>          DTS_DUT_CMD: [192.168.0.34] echo 4096 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
>>          DTS_DUT_CMD: [192.168.0.34] umount `awk '/hugetlbfs/ { print $2 }' /proc/mounts`
>>          DTS_DUT_CMD: [192.168.0.34] awk '/hugetlbfs/ { print $2 }' /proc/mounts
>>          DTS_DUT_CMD: [192.168.0.34] mkdir -p /mnt/huge
>>          DTS_DUT_CMD: [192.168.0.34] mount -t hugetlbfs nodev /mnt/huge
>>          DTS_DUT_CMD: [192.168.0.34] cat /proc/mounts |grep hugetlbfs
>>          DTS_DUT_CMD: [192.168.0.34] modprobe uio
>>          DTS_DUT_CMD: [192.168.0.34] lsmod | grep igb_uio
>>          DTS_DUT_CMD: [192.168.0.34] insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
>>          DTS_DUT_CMD: [192.168.0.34] lsmod | grep igb_uio
>>          DTS_DUT_CMD: [192.168.0.34] usertools/dpdk-devbind.py --bind=igb_uio 0000:02:00.0 0000:02:00.1 0000:02:00.2 0000:02:00.3 
>>                 INFO: 
>> TEST SUITE : TestL2fwd
>>                 INFO: NIC :        fortville_spirit
>>  
>>       DTS_DUT_RESULT: [192.168.0.34] NUMA not supported
>>        SUITE_DUT_CMD: [192.168.0.34] rm -rf ./app/test/test_resource_c.res.o
>>        SUITE_DUT_CMD: [192.168.0.34] rm -rf ./app/test/test_resource_tar.res.o
>>        SUITE_DUT_CMD: [192.168.0.34] rm -rf ./app/test/test_pci_sysfs.res.o
>>        SUITE_DUT_CMD: [192.168.0.34] make -j -C ./examples/l2fwd 
>>                 INFO: Test Case test_l2fwd_integrity Begin
>>        SUITE_DUT_CMD: [192.168.0.34] ./examples/l2fwd/build/app/l2fwd -n 4 -c 0xf -- -q 1 -p 0x3 &
>>                ERROR: Test Case test_l2fwd_integrity Result FAILED: TIMEOUT on ./examples/l2fwd/build/app/l2fwd -n 4 -c 0xf -- -q 1 -p 0x3 &
>>                ERROR: [1] 25652
>> [PEXPECT]# EAL: Detected 8 lcore(s)
>> EAL: No free hugepages reported in hugepages-1048576kB
>> EAL: Probing VFIO support...
>> EAL: PCI device 0000:02:00.0 on NUMA socket -1
>> EAL:   probe driver: 8086:1583 net_i40e
>> EAL: PCI device 0000:02:00.1 on NUMA socket -1
>> EAL:   probe driver: 8086:1583 net_i40e
>> EAL: PCI device 0000:02:00.2 on NUMA socket -1
>> EAL:   probe driver: 8086:1583 net_i40e
>> EAL: PCI device 0000:02:00.3 on NUMA socket -1
>> EAL:   probe driver: 8086:1583 net_i40e
>> MAC updating enabled
>> EAL: Error - exiting with code: 1
>>   Cause: No Ethernet ports - bye
>>                 INFO: 
>> TEST SUITE ENDED: TestL2fwd
>>     
>>       DTS_TESTER_CMD: modprobe igb
>>       DTS_TESTER_CMD: modprobe ixgbe
>>       DTS_TESTER_CMD: modprobe e1000e
>>       DTS_TESTER_CMD: modprobe e1000
>>       DTS_TESTER_CMD: ifconfig eno1 up
>>       DTS_TESTER_CMD: ifconfig enp1s0f0 up
>>       DTS_TESTER_CMD: ifconfig enp1s0f1 up
>>       DTS_TESTER_CMD: ifconfig enp2s0f0 up
>>       DTS_TESTER_CMD: ifconfig enp2s0f1 up
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.0 > /sys/bus/pci/devices/0000\:02\:00.0/driver/unbind
>>          DTS_DUT_CMD: [192.168.0.34] modprobe i40e
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.0 > /sys/bus/pci/drivers/i40e/bind
>>          DTS_DUT_CMD: [192.168.0.34] ifconfig eth6 up
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.1 > /sys/bus/pci/devices/0000\:02\:00.1/driver/unbind
>>          DTS_DUT_CMD: [192.168.0.34] modprobe i40e
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.1 > /sys/bus/pci/drivers/i40e/bind
>>          DTS_DUT_CMD: [192.168.0.34] ifconfig eth5 up
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.2 > /sys/bus/pci/devices/0000\:02\:00.2/driver/unbind
>>          DTS_DUT_CMD: [192.168.0.34] modprobe i40e
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.2 > /sys/bus/pci/drivers/i40e/bind
>>          DTS_DUT_CMD: [192.168.0.34] ifconfig eth7 up
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.3 > /sys/bus/pci/devices/0000\:02\:00.3/driver/unbind
>>          DTS_DUT_CMD: [192.168.0.34] modprobe i40e
>>          DTS_DUT_CMD: [192.168.0.34] echo 0000:02:00.3 > /sys/bus/pci/drivers/i40e/bind
>>          DTS_DUT_CMD: [192.168.0.34] ifconfig eth8 up
>>                 INFO: DTS ended
>> 
>> 
>>  
>>  
>>  
>>  
>>  
>>  
>>  
>>  
>> On Dec 15, 2016, at 9:00 AM, Liu, Yong <yong.liu at intel.com <mailto:yong.liu at intel.com>> wrote:
>>  
>> John, thanks for your information.
>> 
>> 
>> -----Original Message-----
>> From: dts [mailto:dts-bounces at dpdk.org <mailto:dts-bounces at dpdk.org>] On Behalf Of john miller
>> Sent: Thursday, December 15, 2016 12:23 AM
>> To: dts at dpdk.org <mailto:dts at dpdk.org>
>> Subject: [dts] Minimum Tester/DUT configuration
>> 
>> 
>> Hi All,
>> 
>> We have configured a tester and a DUT for DTS testing, both machines are 4
>> core systems, one running ubuntu 14.04 and the other ubuntu 16.04 OS's .
>> Before we plug our hardware into the tester we are trying to establish
>> ground truth using a 2 port Fortville eagle card in the tester and one in
>> the DUT.  The DTS documentation indicates that a minimum system requires 4
>> ports so my first question is, can some of the tests run with a 2 port
>> configuration and is there any documentation that indicates which tests
>> require all 4 ports ?   The basic tests like hello_world, timer, and
>> cmdline pass, but when we attempt run tests like l2fwd we get the
>> following error indicating that 4 ports are required.
>> 
>> 
>> Each case may have different requirements like port number, core number, some kinds of dpdk configuration etc.
>> Most of cases only require 2 ports and four cores, some performance case like l3fwd required more cores and ports. 
>> Some simple case like hello just require few cores.  There's no existing document for each case requirement by now.
>> We have plan to add configuration for each case which can get these information.
>> 
>> For l2fwd case, it required 2 ports and 4 cores on the DUT. 
>> Just from your log, look like dts did not scan out enough port which matched Fortville eagle device's ID.
>> 
>> 
>> 
>>                INFO:
>> TEST SUITE : TestL2fwd
>>                INFO: NIC :        fortville_eagle
>>               ERROR: set_up_all failed:
>> Traceback (most recent call last):
>>  File "/work/dts/framework/test_case.py", line 223, in execute_setup_all
>>    self.set_up_all()
>>  File "/work/dts/tests/TestSuite_l2fwd.py", line 66, in set_up_all
>>    "Not enough ports for " + self.nic)
>>  File "/work/dts/framework/test_case.py", line 146, in verify
>>    raise VerifyFailure(description)
>> VerifyFailure: 'Not enough ports for fortville_eagle’
>> 
>> 
>> 
>> Also the DPDK mutilprocess test documentation indicates that the test
>> should run with only 2 ports.  However when we attempt to run we get the
>> following error.  The error looks like it is a result of the test
>> attempting to use more lcores than are available on the DUT.  Although i
>> could change the test script to avoid this, I would like to know if there
>> is a configuration parameter that i missed that should be set to the
>> number of cores on the DUT.
>> 
>> 
>> That's just what we want to enhance. Most of our cases run on Intel 2 socket platform, and has enough memory and cores.
>> We just noticed that some platforms may not have enough resources as we have. Some of the cases have been modified for reduce requirements and some of them not.
>> We will work on that continuously and you can directly send patch to make sure cases also work on your platform.
>> When case configuration feature is done, I think it will be more easily to gadapt to different platforms.  
>> 
>> 
>> 
>>         DTS_DUT_CMD:
>> [192.168.0.11] ./examples/multi_process/simple_mp/simple_mp/x86_64-native-
>> linuxapp-gcc/simple_mp -n 1 -c 0x6 --proc-type=primary
>>       SUITE_DUT_CMD:
>> [192.168.0.11] ./examples/multi_process/simple_mp/simple_mp/x86_64-native-
>> linuxapp-gcc/simple_mp -n 1 -c 0x60000 --proc-type=secondary
>>               ERROR: Test Case test_multiprocess_simple_mploadtest Result
>> FAILED: TIMEOUT on ./examples/multi_process/simple_mp/simple_mp/x86_64-
>> native-linuxapp-gcc/simple_mp -n 1 -c 0x60000 --proc-type=secondary
>>               ERROR: EAL: Detected lcore 0 as core 0 on socket 0
>> EAL: Detected lcore 1 as core 1 on socket 0
>> EAL: Detected lcore 2 as core 2 on socket 0
>> EAL: Detected lcore 3 as core 3 on socket 0
>> EAL: Detected lcore 4 as core 0 on socket 0
>> EAL: Detected lcore 5 as core 1 on socket 0
>> EAL: Detected lcore 6 as core 2 on socket 0
>> EAL: Detected lcore 7 as core 3 on socket 0
>> EAL: Support maximum 128 logical core(s) by configuration.
>> EAL: Detected 8 lcore(s)
>> EAL: lcore 17 unavailable
>> EAL: invalid coremask
>> 
>> Usage: ./examples/multi_process/simple_mp/simple_mp/x86_64-native-
>> linuxapp-gcc/simple_mp [options]
>> 
>> 
>> 
>> Thank you,
>> -John
>>  
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://dpdk.org/ml/archives/dts/attachments/20170124/f99b9629/attachment.html>


More information about the dts mailing list