[dts] [PATCH] Add Cryptodev Unit Test Cases
Chen, Zhaoyan
zhaoyan.chen at intel.com
Wed Mar 8 02:59:06 CET 2017
Thanks for review. Yong.
> -----Original Message-----
> From: Liu, Yong
> Sent: Wednesday, March 8, 2017 9:54 AM
> To: Chen, Zhaoyan <zhaoyan.chen at intel.com>; dts at dpdk.org
> Cc: Chen, Zhaoyan <zhaoyan.chen at intel.com>
> Subject: RE: [dts] [PATCH] Add Cryptodev Unit Test Cases
>
> Zhaoyan,
> Few comments below.
>
> > -----Original Message-----
> > From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Chen, Zhaoyan
> > Sent: Wednesday, March 08, 2017 8:22 AM
> > To: dts at dpdk.org
> > Cc: Chen, Zhaoyan <zhaoyan.chen at intel.com>
> > Subject: [dts] [PATCH] Add Cryptodev Unit Test Cases
> >
> > ---
> > test_plans/unit_tests_cryptodev_test_plan.rst | 85 +++++++++++++
> > tests/TestSuite_unit_tests_cryptodev.py | 174
> > ++++++++++++++++++++++++++
> > 2 files changed, 259 insertions(+)
> > create mode 100644 test_plans/unit_tests_cryptodev_test_plan.rst
> > create mode 100644 tests/TestSuite_unit_tests_cryptodev.py
> >
> > diff --git a/test_plans/unit_tests_cryptodev_test_plan.rst
> > b/test_plans/unit_tests_cryptodev_test_plan.rst
> > new file mode 100644
> > index 0000000..565def1
> > --- /dev/null
> > +++ b/test_plans/unit_tests_cryptodev_test_plan.rst
> > @@ -0,0 +1,85 @@
> > +.. Copyright (c) 2010,2011 Intel Corporation
>
> Please update copyright end year to 2017.
>
> > + All rights reserved.
> > +
> > + Redistribution and use in source and binary forms, with or without
> > + modification, are permitted provided that the following conditions
> > + are met:
> > +
> > + - Redistributions of source code must retain the above copyright
> > + notice, this list of conditions and the following disclaimer.
> > +
> > + - Redistributions in binary form must reproduce the above copyright
> > + notice, this list of conditions and the following disclaimer in
> > + the documentation and/or other materials provided with the
> > + distribution.
> > +
> > + - Neither the name of Intel Corporation nor the names of its
> > + contributors may be used to endorse or promote products derived
> > + from this software without specific prior written permission.
> > +
> > + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> > + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> > + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> > + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> > + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> > + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> > + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
> INTERRUPTION)
> > + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> > + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> > + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> > + OF THE POSSIBILITY OF SUCH DAMAGE.
> > +
> > +==============================================
> > +Testing of Cryptodev Unit tests
> > +==============================================
> > +
> > +
> > +Description
> > +===========
> > +
> > +This document provides the plan for testing Cryptodev API via
> > +Cryptodev
> > unit tests.
> > +Unit tests include supported Hardware and Software PMD(polling mode
> > device) and supported algorithms.
> > +Cryptodev API provides ability to do encryption/decryption by
> > +integrating
> > QAT(Intel QuickAssist
>
> Please use @ for copyright.
>
> > +Technology) into DPDK. The QAT provides poll mode crypto driver
> > +support
> > for
> > +Intel QuickAssist Adapter 8950 hardware accelerator.
> > +
> > +The testing of Crytpodev API should be tested under either Intel
> > QuickAssist Technology DH895xxC hardware
> > +accelerator or AES-NI library.
> > +
> > +This test suite will run all cryptodev related unit test cases.
> > Alternatively, you could execute
> > +the unit tests manually by app/test DPDK application.
> > +
> > +Unit Test List
> > +==============
> > +
> > +- cryptodev_qat_autotest
> > +- cryptodev_qat_perftest
> > +- cryptodev_aesni_mb_perftest
> > +- cryptodev_sw_snow3g_perftest
> > +- cryptodev_qat_snow3g_perftest
> > +- cryptodev_aesni_gcm_perftest
> > +- cryptodev_openssl_perftest
> > +- cryptodev_qat_continual_perftest
> > +- cryptodev_aesni_mb_autotest
> > +- cryptodev_openssl_autotest
> > +- cryptodev_aesni_gcm_autotest
> > +- cryptodev_null_autotest
> > +- cryptodev_sw_snow3g_autotest
> > +- cryptodev_sw_kasumi_autotest
> > +- cryptodev_sw_zuc_autotest
> > +
> > +
> > +Test Case Setup
> > +===============
> > +
> > +1. Build DPDK and app/test app
> > +2. Bind cryptodev devices to igb_uio driver 3. Manually verify the
> > +app/test by this command, as example, in your
> > build folder
> > +* ./app/test -c 1 -n 1
> > +* RTE>> cryptodev_qat_autotest
> > +
> > +All Unit Test Cases are listed above.
> > +
> > +Expected all tests could pass in testing.
> > +
> > diff --git a/tests/TestSuite_unit_tests_cryptodev.py
> > b/tests/TestSuite_unit_tests_cryptodev.py
> > new file mode 100644
> > index 0000000..356c22c
> > --- /dev/null
> > +++ b/tests/TestSuite_unit_tests_cryptodev.py
> > @@ -0,0 +1,174 @@
> > +# BSD LICENSE
> > +#
> > +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > +# All rights reserved.
> > +#
> > +# Redistribution and use in source and binary forms, with or without
> > +# modification, are permitted provided that the following conditions
> > +# are met:
> > +#
> > +# * Redistributions of source code must retain the above copyright
> > +# notice, this list of conditions and the following disclaimer.
> > +# * Redistributions in binary form must reproduce the above copyright
> > +# notice, this list of conditions and the following disclaimer in
> > +# the documentation and/or other materials provided with the
> > +# distribution.
> > +# * Neither the name of Intel Corporation nor the names of its
> > +# contributors may be used to endorse or promote products derived
> > +# from this software without specific prior written permission.
> > +#
> > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> > +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT #
> > +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> > +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > +COPYRIGHT # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> > +INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> > +(INCLUDING, BUT NOT # LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> > +SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS
> INTERRUPTION)
> > +HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> > +STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE)
> > +ARISING IN ANY WAY OUT OF THE USE # OF THIS SOFTWARE, EVEN IF
> ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > +
> > +import utils
> > +from test_case import TestCase
> > +
> > +
> > +class UnitTestsCryptodev(TestCase):
> > +
> > + def set_up_all(self):
> > +
> > + self.core_config = "1S/2C/1T"
> > + self.number_of_ports = 1
> > + self.dut_ports = self.dut.get_ports(self.nic)
> > + self.verify(len(self.dut_ports) >= self.number_of_ports,
> > + "Not enough ports for " + self.nic)
> > + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> > +
> > + self.logger.info("core config = " + self.core_config)
> > + self.logger.info("number of ports = " + str(self.number_of_ports))
> > + self.logger.info("dut ports = " + str(self.dut_ports))
> > + self.logger.info("ports_socket = " + str(self.ports_socket))
> > +
> > + self.core_mask = utils.create_mask(self.dut.get_core_list(
> > + self.core_config,
> > + socket=self.ports_socket))
> > + self.port_mask = utils.create_mask([self.dut_ports[0]])
> > +
> > + self.tx_port = self.tester.get_local_port(self.dut_ports[0])
> > + self.rx_port = self.tester.get_local_port(self.dut_ports[0])
> > +
> > + self.tx_interface = self.tester.get_interface(self.tx_port)
> > + self.rx_interface = self.tester.get_interface(self.rx_port)
> > +
> > + self.logger.info("core mask = " + self.core_mask)
> > + self.logger.info("port mask = " + self.port_mask)
> > + self.logger.info("tx interface = " + self.tx_interface)
> > + self.logger.info("rx interface = " + self.rx_interface)
> > +
> > + # Rebuild the dpdk with cryptodev pmds
> > CONFIG_RTE_LIBRTE_PMD_ZUC=n
> > + self.dut.send_expect("export
> > AESNI_MULTI_BUFFER_LIB_PATH=/root/ipsec_043/code/", "#")
> > + self.dut.send_expect("export
> > LIBSSO_SNOW3G_PATH=/root/libsso_snow3g/snow3g/", "#")
> > + self.dut.send_expect("export
> > LIBSSO_ZUC_PATH=/root/libsso_zuc.1.0.1.1-8/zuc", "#")
> > + self.dut.send_expect("export
> > LIBSSO_KASUMI_PATH=/root/LibSSO_0_3_1/isg_cid-
> > wireless_libs/ciphers/kasumi/", "#")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_QAT=n$/CONFIG_RTE_LIBRTE_PMD_QAT=y/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n$/CONFIG_RTE_LIBRTE_PMD_
> AESNI_GCM=y/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n$/CONFIG_RTE_LIBRTE_PMD
> _NULL_CRY
> > PTO=
> > y/' config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n$/CONFIG_RTE_LIBRTE_PMD_SN
> OW3G=y/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=n$/CONFIG_RTE_LIBRTE_PMD_KAS
> UMI=y/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n$/CONFIG_RTE_LIBRTE_PMD_OPE
> NSSL=y/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n$/CONFIG_RTE_LIBRTE_PMD_A
> ESNI_MB=y/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_ZUC=n$/CONFIG_RTE_LIBRTE_PMD_ZUC=y/'
> > config/common_base", "# ")
> > + self.dut.skip_setup = False
> > + self.dut.build_install_dpdk(self.dut.target)
> > +
> > + #out = self.dut.build_dpdk_apps("./app/test/")
> > + #self.verify('make: Leaving directory' in out, "Compilation
> > failed")
> > +
> > +
> > + # Bind QAT VF devices
> > + out = self.dut.send_expect("lspci -d:443|awk '{print $1}'",
> > + "# ",
> > 10)
> > + self.dut.send_expect('echo "8086 0443" >
> > /sys/bus/pci/drivers/igb_uio/new_id', "# ", 10)
> > + for line in out.replace("\r", "\n").replace("\n\n",
> > "\n").split("\n"):
> > + cmd = "echo 0000:{} >
> > /sys/bus/pci/devices/0000\:{}/driver/unbind".format(line,
> > line.replace(":",
> > "\:"))
> > + self.dut.send_expect(cmd, "# ", 10)
> > + cmd = "echo 0000:{} >
> > /sys/bus/pci/drivers/igb_uio/bind".format(line)
> > + self.dut.send_expect(cmd, "# ", 10)
> > +
> > + def set_up(self):
> > + pass
> > +
> > + def tear_down(self):
> > + pass
> > +
> > + def tear_down_all(self):
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_QAT=y$/CONFIG_RTE_LIBRTE_PMD_QAT=n/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y$/CONFIG_RTE_LIBRTE_PMD_
> AESNI_GCM=n/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y$/CONFIG_RTE_LIBRTE_PMD
> _NULL_CRY
> > PTO=
> > n/' config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y$/CONFIG_RTE_LIBRTE_PMD_SN
> OW3G=n/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=y$/CONFIG_RTE_LIBRTE_PMD_KAS
> UMI=n/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y$/CONFIG_RTE_LIBRTE_PMD_OPE
> NSSL=n/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y$/CONFIG_RTE_LIBRTE_PMD_A
> ESNI_MB=n/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_ZUC=y$/CONFIG_RTE_LIBRTE_PMD_ZUC=n/'
> > config/common_base", "# ")
> > +
> > + def test_cryptodev_qat_autotest(self):
> > + self.__run_unit_test("cryptodev_qat_autotest")
> > +
> > + def test_cryptodev_qat_perftest(self):
> > + self.__run_unit_test("cryptodev_qat_perftest")
> > +
> > + def test_cryptodev_aesni_mb_perftest(self):
> > + self.__run_unit_test("cryptodev_aesni_mb_perftest")
> > +
> > + def test_cryptodev_sw_snow3g_perftest(self):
> > + self.__run_unit_test("cryptodev_sw_snow3g_perftest")
> > +
> > + def test_cryptodev_qat_snow3g_perftest(self):
> > + self.__run_unit_test("cryptodev_qat_snow3g_perftest")
> > +
> > + def test_cryptodev_aesni_gcm_perftest(self):
> > + self.__run_unit_test("cryptodev_aesni_gcm_perftest")
> > +
> > + def test_cryptodev_openssl_perftest(self):
> > + self.__run_unit_test("cryptodev_openssl_perftest")
> > +
> > + def test_cryptodev_qat_continual_perftest(self):
> > + self.__run_unit_test("cryptodev_qat_continual_perftest")
> > +
> > + def test_cryptodev_aesni_mb_autotest(self):
> > + self.__run_unit_test("cryptodev_aesni_mb_autotest")
> > +
> > + def test_cryptodev_openssl_autotest(self):
> > + self.__run_unit_test("cryptodev_openssl_autotest")
> > +
> > + def test_cryptodev_aesni_gcm_autotest(self):
> > + self.__run_unit_test("cryptodev_aesni_gcm_autotest")
> > +
> > + def test_cryptodev_null_autotest(self):
> > + self.__run_unit_test("cryptodev_null_autotest")
> > +
> > + def test_cryptodev_sw_snow3g_autotest(self):
> > + self.__run_unit_test("cryptodev_sw_snow3g_autotest")
> > +
> > + def test_cryptodev_sw_kasumi_autotest(self):
> > + self.__run_unit_test("cryptodev_sw_kasumi_autotest")
> > +
> > + def test_cryptodev_sw_zuc_autotest(self):
> > + self.__run_unit_test("cryptodev_sw_zuc_autotest")
> > +
> > + def __run_unit_test(self, testsuite, timeout=600):
> > + print "STEP_TEST: " + testsuite
> > + self.dut.send_expect("dmesg -C", "# ", 30)
> > + self.dut.send_expect("./{target}/app/test -n 1 -c
> > 0xf".format(target=self.dut.target), "RTE>>", 30)
> > + out = ""
> > + try:
> > + out = self.dut.send_expect(testsuite, "RTE>>", timeout)
> > + self.dut.send_expect("quit", "# ", 30)
> > + except Exception, ex:
> > + print ex
> > + print "run cryptodev_unit_tests process coredump"
> > + self.dut.alt_session.send_expect("killall test", "# ", 30)
> > + dmesg = self.dut.alt_session.send_expect("dmesg", "# ", 30)
> > + print dmesg
> > + print out
> > + self.verify("Test OK" in out, "Test Failed")
> > +
> > --
> > 1.9.3
More information about the dts
mailing list