[dts] [PATCH] Add crypto performance auto test suit and test plan
Chen, Zhaoyan
zhaoyan.chen at intel.com
Thu Mar 16 07:44:12 CET 2017
Gang,
Please update the license date to "2016-2017".
Regards,
Zhaoyan Chen
> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of
> gangx.yang at intel.com
> Sent: Thursday, March 16, 2017 2:35 PM
> To: dts at dpdk.org
> Cc: Yang, GangX <gangx.yang at intel.com>
> Subject: [dts] [PATCH] Add crypto performance auto test suit and test plan
>
> From: gangyanx <gangx.yang at intel.com>
>
> - add QAT pmd performance auto test
> - add AESNI_MB pmd performance auto test
> - add AESNI_GCM pmd performance auto test
> - add KASUMI pmd performance auto test
> - add SNOW3G pmd performance auto test
> - add ZUC pmd performance auto test
> - add openssl pmd performance auto test
> - add crypto performance test plan
> ---
> test_plans/crypto_perf_test_plan.rst | 310 +++++++
> tests/TestSuite_crypto_perf.py | 1484
> ++++++++++++++++++++++++++++++++++
> 2 files changed, 1794 insertions(+)
> create mode 100755 test_plans/crypto_perf_test_plan.rst
> create mode 100755 tests/TestSuite_crypto_perf.py
>
> diff --git a/test_plans/crypto_perf_test_plan.rst
> b/test_plans/crypto_perf_test_plan.rst
> new file mode 100755
> index 0000000..7d5ee0d
> --- /dev/null
> +++ b/test_plans/crypto_perf_test_plan.rst
> @@ -0,0 +1,310 @@
> +.. Copyright (c) 2010,2011 Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +==============================================
> +Testing of Cryptodev performance in DPDK
> +==============================================
> +
> +
> +Description
> +===========
> +
> +This document provides the test plan for testing Cryptodev performance by
> +crypto perf application. The crypto perf application is a DPDK app under
> +DPDK app folder.
> +
> +Crypto perf application supports most of Cryptodev PMDs(polling mode
> dirver)
> +Intel QuickAssist Technology DH895xxC/DH_C62xx hardware
> +accelerator (QAT PMD), AESNI MB PMD, AESNI GCM PMD, NULL PMD,
> KASUMI PMD,
> +SNOW3G PMD,ZUC PMD or OPENSSL library PMD.
> +
> +AESNI MB PMD algorithm table
> +The table below contains AESNI MB algorithms which supported in crypto
> perf.
> +Part of the algorithms are not supported currently.
> +
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +|Algorithm| Mode | Detail |
> +| | |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| aes | cbc | Encrypt/Decrypt;Key size: 128, 192, 256 bits
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| aes | ctr | Encrypt/Decrypt;Key size: 128, 192, 256 bits
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| md | | md5 |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| sha | | sha1, sha2-224, sha2-384, sha2-256, sha2-512
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| hmac | | Support md5 and sha implementations sha1, sha2-224,
> sha2-256, |
> +| | | sha2-384, sha2-512 |
> +| | | Key Size versus Block size support: Key Size must be <=
> block size; |
> +| | | Mac Len Supported sha1 10, 12, 16, 20 bytes;
> |
> +| | | Mac Len Supported sha2-256 16, 24, 32 bytes;
> |
> +| | | Mac Len Supported sha2-384 24,32, 40, 48 bytes;
> |
> +| | | Mac Len Supported sha2-512 32, 40, 48, 56, 64 bytes;
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +
> +QAT algorithm table:
> +The table below contains QAT Algorithms which supported in crypto perf.
> +Part of the algorithms are not supported currently.
> +
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +|Algorithm| Mode | Detail |
> +| | |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| aes | cbc | Encrypt/Decrypt;Key size: 128, 192, 256 bits
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| aes | ctr | Encrypt/Decrypt;Key size: 128, 192, 256 bits
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| 3des | cbc | Encrypt/Decrypt;Key size: 128, 192 bits
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| 3des | ctr | Encrypt/Decrypt;Key size: 128, 192 bits
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| md | | md5 |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| sha | | sha1, sha2-224, sha2-256, sha2-384, sha2-512
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| hmac | | Support md5 and sha implementations sha1, sha2-224,
> sha2-256, |
> +| | | sha2-384, sha2-512 |
> +| | | Key Size versus Block size support: Key Size must be <=
> block size; |
> +| | | Mac Len Supported sha1 10, 12, 16, 20 bytes;
> |
> +| | | Mac Len Supported sha2-256 16, 24, 32 bytes;
> |
> +| | | Mac Len Supported sha2-384 24,32, 40, 48 bytes;
> |
> +| | | Mac Len Supported sha2-512 32, 40, 48, 56, 64 bytes;
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| aes | gcm | Key Sizes:128, 192, 256 bits; |
> +| | | Associated Data Length: 0 ~ 240 bytes; |
> +| | | Payload Length: 0 ~ (2^32 -1) bytes; |
> +| | | IV source: external; |
> +| | | IV Lengths: 96 bits; |
> +| | | Tag Lengths: 8, 12, 16 bytes; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| kasumi | f8 | Encrypt/Decrypt; Key size: 128 |
> ++ +---------+---------+---------+----------+----------+----------+----------+-----
> -----+----------+
> +| | f9 | Generate/Verify; Key size: 128 |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| snow3g | uea2 | Encrypt/Decrypt; Key size: 128
> |
> ++ +---------+---------+---------+----------+----------+----------+----------+-----
> -----+----------+
> +| | uia2 | Generate/Verify; Key size: 128 |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +
> +AESNI_GCM algorithm table
> +The table below contains AESNI GCM PMD algorithms which are supported
> +in crypto perf
> +
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +|Algorithm| Mode | Detail |
> +| | |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| aes | gcm | Encrypt/Decrypt;Key Sizes:128, 256 bits;
> |
> +| | | IV source: external; |
> +| | | IV Lengths: 96 bits; |
> +| | | Generate/Verify;Key Sizes:128,192,256 bits;
> |
> +| | | Associated Data Length: 0 ~ 240 bytes; |
> +| | | Payload Length: 0 ~ (2^32 -1) bytes; |
> +| | | Tag Lengths: 8, 12, 16 bytes; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| aes | gmac | Generate/Verify;Key Sizes:128,192,256 bits;
> |
> +| | | Associated Data Length: 0 ~ 240 bytes; |
> +| | | Payload Length: 0 ~ (2^32 -1) bytes; |
> +| | | Tag Lengths: 8, 12, 16 bytes; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +
> +NULL algorithm table
> +The table below contains NULL algorithms which are supported in crypto
> perf.
> +Part of the algorithms are not supported currently.
> +
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +|Algorithm| Mode | Detail |
> +| | |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| null | null | Encrypt/Decrypt;Key Sizes:0 bits; |
> +| | | IV Lengths: 0 bits; |
> +| | | Generate/Verify;Key Sizes:0 bits; |
> +| | | Associated Data Length: 1 bytes; |
> +| | | Payload Length: 0 bytes; |
> +| | | Tag Lengths: 0 bytes; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +
> +KASUMI algorithm table
> +The table below contains KASUMI algorithms which are supported in crypto
> perf.
> +
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +|Algorithm| Mode | Detail |
> +| | |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| kasumi | f8 | Encrypt/Decrypt;Key Sizes:128 bits;
> |
> +| | | IV source: external; |
> +| | | IV Lengths: 64 bits; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| kasumi | f9 | Generate/Verify;Key Sizes:128 bits;
> |
> +| | | Payload Length: 64 bytes; |
> +| | | Tag Lengths: 4 bytes; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +
> +SNOW3G algorithm table
> +The table below contains SNOW3G algorithms which are supported in
> crypto perf.
> +
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +|Algorithm| Mode | Detail |
> +| | |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| snow3g | uea2 | Encrypt/Decrypt;Key Sizes:128 bits;
> |
> +| | | IV source: external; |
> +| | | IV Lengths: 128 bits; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| snow3g | uia2 | Generate/Verify;Key Sizes:128 bits;
> |
> +| | | Payload Length: 128 bytes; |
> +| | | Tag Lengths: 4 bytes; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +
> +ZUC algorithm table
> +The table below contains ZUC algorithms which are supported in crypto perf.
> +
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +|Algorithm| Mode | Detail |
> +| | |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| zuc | eea3 | Encrypt/Decrypt;Key Sizes:128 bits;
> |
> +| | | IV source: external; |
> +| | | IV Lengths: 128 bits; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| zuc | eia2 | Generate/Verify;Key Sizes:128 bits;
> |
> +| | | Payload Length: 128 bytes; |
> +| | | Tag Lengths: 4 bytes; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +
> +OPENSSL algorithm table:
> +The table below contains OPENSSL algorithms which are supported in crypto
> perf.
> +
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +|Algorithm| Mode | Detail |
> +| | |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| aes | cbc | Encrypt/Decrypt;Key size: 128, 192, 256 bits
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| aes | ctr | Encrypt/Decrypt;Key size: 128, 192, 256 bits
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| 3des | cbc | Encrypt/Decrypt;Key size: 128, 192 bits
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| 3des | ctr | Encrypt/Decrypt;Key size: 128, 192 bits
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| md | | md5 |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| sha | | sha1, sha2-224, sha2-256, sha2-384, sha2-512
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| hmac | | Support md5 and sha implementations sha1, sha2-224,
> sha2-256, |
> +| | | sha2-384, sha2-512 |
> +| | | Key Size versus Block size support: Key Size must be <=
> block size; |
> +| | | Mac Len Supported sha1 10, 12, 16, 20 bytes;
> |
> +| | | Mac Len Supported sha2-256 16, 24, 32 bytes;
> |
> +| | | Mac Len Supported sha2-384 24,32, 40, 48 bytes;
> |
> +| | | Mac Len Supported sha2-512 32, 40, 48, 56, 64 bytes;
> |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| aes | gcm | Encrypt/Decrypt;Key Sizes:128 bits;
> |
> +| | | IV source: external; |
> +| | | IV Lengths: 96 bits; |
> +| | | Associated Data Length: 0 ~ 240 bytes; |
> +| | | Generate/Verify; 128, 192,256 bytes; |
> +| | | Payload Length: 64,128 bytes; |
> +| | | Tag Lengths: 16 bytes; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +| aes | gmac | Generate/Verify;Key Sizes:128,192,256 bits;
> |
> +| | | Associated Data Length: 0 ~ 240 bytes; |
> +| | | Payload Length: 8 ~ (2^32 -4) bytes; |
> +| | | Tag Lengths:16 bytes; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+--
> --------+----------+
> +
> +
> +Prerequisites
> +=============
> +To test CryptoDev performance, an application
> +test_crypto_perf is added into DPDK.
> +
> +The test commands of test_crypto_perf is below::
> +
> + ./build/app/dpdk-test-crypto-perf -c COREMASK --vdev
> (AESNI_MB|QAT|AESNI_GCM|OPENSSL|SNOW3G|KASUMI|ZUC|NULL) -w
> (PCI:DEVICE:FUNCTION) -w (PCI:DEVICE:FUNCTION) -- --ptest
> (throughput|latency) --devtype
> (crypto_aesni_mb|crypto_qat|crypto_aes_gcm|crypto_openssl|crypto_sn
> ow3g|crypto_kasumi|crypto_zuc|crypto_null) --optype (aead|cipher-
> only|auth-only|cipher-then-auth|auth-then-cipher) --cipher-algo (ALGO) --
> cipher-op (encrypt|decrypt) --cipher-key-sz (key_size) --cipher-iv-sz (iv_size)
> --auth-algo (ALGO) --auth-op (generate|verify) --auth-key-sz (key_size) --
> auth-aad-sz (aad_size) --auth-digest-sz (digest_size) --total-ops
> (ops_number) --burst-sz (burst_size) --buffer-sz (buffer_size)
> +
> +
> +
> +Test case: CryptoDev performance test
> +====================================================
> ++----------+ +----------+
> +| | | |
> +| | --------------> | |
> +| Tester | | DUT |
> +| | | |
> +| | <-------------> | |
> ++----------+ +----------+
> +
> +common::
> +
> + --vdev
> (AESNI_MB|QAT|AESNI_GCM|OPENSSL|SNOW3G|KASUMI|ZUC|NULL)
> this value can be set as : crypto_aesni_mb_pmd, crypto_aes_gcm_pmd,
> crypto_openssl_pmd, crypto_snow3g_pmd, crypto_kasumi_pmd,
> crypto_zuc_pmd or crypto_null_pmd . if pmd is QAT this parameter should
> not be set
> +
> + -w (PCI:DEVICE:FUNCTION) this value is the port whitelist or QAT device
> whitelist . if vdev is set and devtype is not crypto_qat , the QAT device
> whitelist is not needed , but you also can set it on the cmd line .
> +
> + --optype (aead|cipher-only|auth-only|cipher-then-auth|auth-then-
> cipher): if cipher-algo is aes-gcm or gmac this value must be set to aead .
> otherwise it will be set to others. please notice , null algorithm only support
> cipher-only test.
> +
> + other parameters please reference above table's parameter .
> +
> +QAT PMD Commmand line Eg::
> +
> + ./build/app/dpdk-test-crypto-perf -c 0xf -w 0000:01:00.0 -w 0000:03:3d.0
> -- --ptest throughput --devtype crypto_qat --optype cipher-then-auth --
> cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --cipher-iv-sz 16 --
> auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-aad-sz 0 --
> auth-digest-sz 20 --total-ops 10000000 --burst-sz 32 --buffer-sz 1024
> +
> +AESNI_MB PMD Commmand line Eg::
> +
> + ./build/app/dpdk-test-crypto-perf -c 0xf --vdev crypto_aesni_mb_pmd -
> w 0000:01:00.0 -w 0000:03:3d.0 -- --ptest throughput --devtype
> crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-
> op encrypt --cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo sha1-hmac --auth-
> op generate --auth-key-sz 64 --auth-aad-sz 0 --auth-digest-sz 20 --total-ops
> 10000000 --burst-sz 32 --buffer-sz 1024
> +
> +AESNI_GCM PMD Commmand line Eg::
> +
> + ./build/app/dpdk-test-crypto-perf -c 0xf --vdev crypto_aesni_gcm_pmd
> -w 0000:01:00.0 -w 0000:03:3d.0 -- --ptest throughput --devtype
> crypto_aesni_gcm --optype aead --cipher-algo aes-gcm --cipher-op encrypt
> --cipher-key-sz 16 --cipher-iv-sz 12 --auth-algo aes-gcm --auth-op generate --
> auth-key-sz 16 --auth-aad-sz 4 --auth-digest-sz 12 --total-ops 10000000 --
> burst-sz 32 --buffer-sz 1024
> +
> +OPENSSL PMD Commmand line Eg::
> +
> + ./build/app/dpdk-test-crypto-perf -c 0xf --vdev crypto_openssl_pmd -w
> 0000:01:00.0 -w 0000:03:3d.0 -- --ptest throughput --devtype crypto_openssl
> --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --
> cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo sha1-hmac --auth-op generate -
> -auth-key-sz 64 --auth-aad-sz 0 --auth-digest-sz 20 --total-ops 10000000 --
> burst-sz 32 --buffer-sz 64
> +
> +NULL PMD Commmand line Eg::
> +
> + ./build/app/dpdk-test-crypto-perf -c 0xf --vdev crypto_null_pmd -w
> 0000:01:00.0 -w 0000:03:3d.0 -- --ptest throughput --devtype crypto_null --
> optype cipher-only --cipher-algo null --cipher-op encrypt --cipher-key-sz 0 --
> cipher-iv-sz 0 --total-ops 10000000 --burst-sz 32 --buffer-sz 1024
> +
> +KASUMI PMD Commmand line Eg::
> +
> + ./build/app/dpdk-test-crypto-perf -c 0xf --vdev crypto_kasumi_pmd -w
> 0000:01:00.0 -w 0000:03:3d.0 -- --ptest throughput --devtype crypto_kasumi -
> -optype cipher-then-auth --cipher-algo kasumi-f8 --cipher-op encrypt --
> cipher-key-sz 16 --cipher-iv-sz 8 --auth-algo kasumi-f9 --auth-op generate --
> auth-key-sz 16 --auth-aad-sz 8 --auth-digest-sz 4 --total-ops 10000000 --
> burst-sz 32 --buffer-sz 1024
> +
> +SNOW3G PMD Commmand line Eg::
> +
> + ./build/app/dpdk-test-crypto-perf -c 0xf --vdev crypto_snow3g_pmd -w
> 0000:01:00.0 -w 0000:03:3d.0 -- --ptest throughput --devtype crypto_snow3g
> --optype cipher-then-auth --cipher-algo snow3g-uea2 --cipher-op encrypt --
> cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo snow3g-uia2 --auth-op
> generate --auth-key-sz 16 --auth-aad-sz 16 --auth-digest-sz 4 --total-ops
> 10000000 --burst-sz 32 --buffer-sz 1024
> +
> +ZUC PMD Commmand line Eg::
> +
> + ./build/app/dpdk-test-crypto-perf -c 0xf --vdev crypto_zuc_pmd -w
> 0000:01:00.0 -w 0000:03:3d.0 -- --ptest throughput --devtype crypto_zuc_mb
> --optype cipher-then-auth --cipher-algo zuc-eea3 --cipher-op encrypt --
> cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo zuc-eia3 --auth-op generate --
> auth-key-sz 16 --auth-aad-sz 16 --auth-digest-sz 4 --total-ops 10000000 --
> burst-sz 32 --buffer-sz 1024
> +
> +
> diff --git a/tests/TestSuite_crypto_perf.py b/tests/TestSuite_crypto_perf.py
> new file mode 100755
> index 0000000..b9e3a7c
> --- /dev/null
> +++ b/tests/TestSuite_crypto_perf.py
> @@ -0,0 +1,1484 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> +
> +import hmac
> +import hashlib
> +import binascii
> +import time
> +import os
> +import sys
> +import dts
> +import utils
> +import commands
> +import copy
> +import time
> +import random
> +from test_case import TestCase
> +
> +
> +class TestCryptoPerf(TestCase):
> +
> + def set_up_all(self):
> +
> + self.filename = ""
> + self.__LTCY = ""
> + self.__THPT = ""
> + self.qat_wilte_list = []
> + self.total_buffer_list = []
> + self.waiting_to_coll_buf = []
> +
> + self.core_config = "1S/2C/1T"
> + self.number_of_ports = 1
> + self.dut_ports = self.dut.get_ports(self.nic)
> + self.verify(len(self.dut_ports) >= self.number_of_ports,
> + "Not enough ports for " + self.nic)
> + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> +
> + self.logger.info("core config = " + self.core_config)
> + self.logger.info("number of ports = " + str(self.number_of_ports))
> + self.logger.info("dut ports = " + str(self.dut_ports))
> + self.logger.info("ports_socket = " + str(self.ports_socket))
> +
> + self.core_mask = utils.create_mask(self.dut.get_core_list(
> + self.core_config,
> + socket=self.ports_socket))
> + self.port_mask = utils.create_mask([self.dut_ports[0]])
> +
> + self.tx_port = self.tester.get_local_port(self.dut_ports[0])
> + self.rx_port = self.tester.get_local_port(self.dut_ports[0])
> +
> + self.tx_interface = self.tester.get_interface(self.tx_port)
> + self.rx_interface = self.tester.get_interface(self.rx_port)
> +
> + self.logger.info("core mask = " + self.core_mask)
> + self.logger.info("port mask = " + self.port_mask)
> + self.logger.info("tx interface = " + self.tx_interface)
> + self.logger.info("rx interface = " + self.rx_interface)
> +
> + # Rebuild the dpdk with cryptodev pmds
> CONFIG_RTE_LIBRTE_PMD_ZUC=n
> + self.dut.send_expect("export
> AESNI_MULTI_BUFFER_LIB_PATH=/root/ipsec_044/code/", "#")
> + self.dut.send_expect("export
> LIBSSO_SNOW3G_PATH=/root/libsso_snow3g/snow3g/", "#")
> + self.dut.send_expect("export
> LIBSSO_ZUC_PATH=/root/libsso_zuc.1.0.1.1-8/zuc", "#")
> + self.dut.send_expect("export
> LIBSSO_KASUMI_PATH=/root/LibSSO_0_3_1/isg_cid-
> wireless_libs/ciphers/kasumi/", "#")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_QAT=n$/CONFIG_RTE_LIBRTE_PMD_QAT=y/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n$/CONFIG_RTE_LIBRTE_PMD_
> AESNI_GCM=y/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n$/CONFIG_RTE_LIBRTE_PMD
> _NULL_CRYPTO=y/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n$/CONFIG_RTE_LIBRTE_PMD_SN
> OW3G=y/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=n$/CONFIG_RTE_LIBRTE_PMD_KAS
> UMI=y/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n$/CONFIG_RTE_LIBRTE_PMD_OPE
> NSSL=y/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n$/CONFIG_RTE_LIBRTE_PMD_A
> ESNI_MB=y/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_ZUC=n$/CONFIG_RTE_LIBRTE_PMD_ZUC=y/'
> config/common_base", "# ")
> + self.dut.skip_setup = False
> + self.dut.build_install_dpdk(self.dut.target)
> +
> + # test-crypto-perf compile
> + out = self.dut.build_dpdk_apps("./app/test-crypto-perf")
> +
> + # Bind QAT VF devices
> + out = self.dut.send_expect("lspci -d:37c9|awk '{print $1}'", "# ", 10)
> + self.dut.send_expect('echo "8086 37c9" >
> /sys/bus/pci/drivers/igb_uio/new_id', "# ", 10)
> + for line in out.replace("\r", "\n").replace("\n\n", "\n").split("\n"):
> + cmd = "echo 0000:{} >
> /sys/bus/pci/devices/0000\:{}/driver/unbind".format(line, line.replace(":",
> "\:"))
> + qat_device = "0000:{}".format(line, line.replace(":", "\:"))
> + self.qat_wilte_list.append(qat_device)
> + self.dut.send_expect(cmd, "# ", 10)
> + cmd = "echo 0000:{} > /sys/bus/pci/drivers/igb_uio/bind".format(line)
> + self.dut.send_expect(cmd, "# ", 10)
> + self.__check_buffer_size_number()
> +
> + def set_up(self):
> + pass
> +
> + def test_qat_AES_CBC_perf(self):
> + result = True
> + self.logger.info("Test qat_c_AES_CBC_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "qat_c_AES_CBC_Perf")
> + self.verify(result, True)
> +
> + def test_qat_AES_CTR_perf(self):
> + result = True
> + self.logger.info("Test qat_c_AES_CTR_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "qat_c_AES_CTR_Perf")
> + self.verify(result, True)
> +
> + def test_qat_AES_GCM_perf(self):
> + result = True
> + self.logger.info("Test qat_c_AES_GCM_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "qat_c_AES_GCM_Perf")
> + self.verify(result, True)
> +
> + def test_qat_3DES_CBC_perf(self):
> + result = True
> + self.logger.info("Test qat_c_3DES_CTR_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "qat_c_3DES_CTR_Perf")
> + self.verify(result, True)
> +
> + def test_qat_3DES_CTR_perf(self):
> + result = True
> + self.logger.info("Test qat_c_3DES_CBC_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "qat_c_3DES_CBC_Perf")
> + self.verify(result, True)
> +
> + def test_qat_KASUMI_perf(self):
> + result = True
> + self.logger.info("Test qat_c_KASUMMI_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "qat_c_KASUMMI_Perf")
> + self.verify(result, True)
> +
> + def test_qat_SNOW3G_perf(self):
> + result = True
> + self.logger.info("Test qat_c_SNOW3G_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "qat_c_SNOW3G_Perf")
> + self.verify(result, True)
> +
> + def test_qat_HASH_perf(self):
> + result = True
> + self.logger.info("Test qat_h_auto_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "qat_h_auto_Perf")
> + self.verify(result, True)
> +
> + def test_qat_NULL_perf(self):
> + result = True
> + self.logger.info("Test qat_NULL_auto_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "qat_NULL_auto_Perf")
> + self.verify(result, True)
> +
> + def test_aesni_mb_AES_CBC_perf(self):
> + result = True
> + self.logger.info("Test aesni_mb_c_AES_CBC_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "aesni_mb_c_AES_CBC_Perf")
> + self.verify(result, True)
> +
> + def test_aesni_mb_AES_CTR_perf(self):
> + result = True
> + self.logger.info("Test aesni_mb_c_AES_CTR_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "aesni_mb_c_AES_CTR_Perf")
> + self.verify(result, True)
> +
> + def test_aesni_mb_HASH_perf(self):
> + result = True
> + self.logger.info("Test aesni_mb_h_auto_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "aesni_mb_h_auto_Perf")
> + self.verify(result, True)
> +
> + def test_aesni_gcm_AES_GCM_perf(self):
> + result = True
> + self.logger.info("Test aes_gcm_c_AES_GCM_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "aes_gcm_c_AES_GCM_Perf")
> + self.verify(result, True)
> +
> + def test_kasumi_KASUMI_perf(self):
> + result = True
> + self.logger.info("Test kasumi_KASUMI_auto_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "kasumi_KASUMI_auto_Perf")
> + self.verify(result, True)
> +
> + def test_snow3g_SNOW3G_perf(self):
> + result = True
> + self.logger.info("Test snow3g_SNOW3G_auto_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "snow3g_SNOW3G_auto_Perf")
> + self.verify(result, True)
> +
> + def test_zuc_ZUC_perf(self):
> + result = True
> + self.logger.info("Test zuc_ZUC_auto_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "zuc_ZUC_auto_Perf")
> + self.verify(result, True)
> +
> + def test_null_NULL_perf(self):
> + result = True
> + self.logger.info("Test null_NULL_auto_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "null_NULL_auto_Perf")
> + self.verify(result, True)
> +
> + def test_openssl_AES_CBC_perf(self):
> + result = True
> + self.logger.info("Test openssl_c_AES_CBC_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "openssl_c_AES_CBC_Perf")
> + self.verify(result, True)
> +
> + def test_openssl_AES_CTR_perf(self):
> + result = True
> + self.logger.info("Test openssl_c_AES_CTR_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "openssl_c_AES_CTR_Perf")
> + self.verify(result, True)
> +
> + def test_openssl_AES_GCM_perf(self):
> + result = True
> + self.logger.info("Test openssl_c_AES_GCM_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "openssl_c_AES_GCM_Perf")
> + self.verify(result, True)
> +
> + def test_openssl_3DES_CBC_perf(self):
> + result = True
> + self.logger.info("Test openssl_c_3DES_CBC_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "openssl_c_3DES_CBC_Perf")
> + self.verify(result, True)
> +
> + def test_openssl_3DES_CTR_perf(self):
> + result = True
> + self.logger.info("Test openssl_c_3DES_CTR_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "openssl_c_3DES_CTR_Perf")
> + self.verify(result, True)
> +
> + def test_openssl_HASH_perf(self):
> + result = True
> + self.logger.info("Test openssl_h_HASH_auto_Perf")
> + result = self.__execute_crypto_perf_test(
> + test_vectors, "openssl_h_HASH_auto_Perf")
> + self.verify(result, True)
> +
> + def test_calculatr_case_number(self):
> +
> + self.__calculate_totall_cases_numb()
> +
> + def __execute_crypto_perf_test(self, test_vectors, test_vector_name):
> + failed_count = 0
> + result = True
> +
> + if test_vector_name not in test_vectors:
> + self.logger.warn("SKIP : " + test_vector_name)
> + return True
> +
> + test_vector = test_vectors[test_vector_name]
> +
> + test_vector_list = self.__test_vector_to_vector_list(test_vector,
> + core_mask=self.core_mask,
> + port_mask=self.port_mask)
> +
> + currently_time = time.strftime('%Y-%m-%d %H:%M:%S',
> time.localtime(time.time()))
> + case_line = "<<<[{time}][{name}] Total Generated: [{num}]
> Cases>>>\n".format(
> + time=currently_time, name=test_vector_name,
> num=len(test_vector_list))
> + self.logger.info(case_line)
> +
> + for test_vector in test_vector_list:
> + self.logger.debug(test_vector)
> + cmd_str = self.__test_vector_to_cmd(test_vector,
> + core_mask=self.core_mask,
> + port_mask=self.port_mask)
> + out = self.dut.send_expect(cmd_str, "]# ", 600)
> + self.logger.info("Test Result:\n*********************\n
> {ret}".format(ret=out))
> + ret = self.__result_collection(out, test_vector)
> + if ret is False:
> + failed_count = failed_count + 1
> + result = result and ret
> + self.logger.info(("[{name}] Total Failed cases: [{num}]\n".format(
> + name=test_vector_name, num=failed_count)))
> + return result
> +
> + def tear_down(self):
> + pass
> +
> + def tear_down_all(self):
> + f = open(self.filename, "a")
> + currently_time = time.strftime('%Y-%m-%d %H:%M:%S',
> time.localtime(time.time()))
> + f.write("...Test Finished [{time}]...".format(time=currently_time))
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_QAT=y$/CONFIG_RTE_LIBRTE_PMD_QAT=n/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y$/CONFIG_RTE_LIBRTE_PMD_
> AESNI_GCM=n/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y$/CONFIG_RTE_LIBRTE_PMD
> _NULL_CRYPTO=n/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y$/CONFIG_RTE_LIBRTE_PMD_SN
> OW3G=n/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=y$/CONFIG_RTE_LIBRTE_PMD_KAS
> UMI=n/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y$/CONFIG_RTE_LIBRTE_PMD_OPE
> NSSL=n/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y$/CONFIG_RTE_LIBRTE_PMD_A
> ESNI_MB=n/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_ZUC=y$/CONFIG_RTE_LIBRTE_PMD_ZUC=n/'
> config/common_base", "# ")
> + f.close()
> +
> + def __check_buffer_size_number(self):
> + buf_numb = 0
> + buf_list = []
> + for vector_name in test_vectors:
> + temp_numb = 0
> + temp_list = []
> + vector = test_vectors[vector_name]
> + if vector["buffer-sz"] != "":
> + if vector["buffer-sz"].find(",") != -1:
> + buf = vector["buffer-sz"].split(",")
> + temp_list = copy.deepcopy(buf)
> + temp_numb = len(buf)
> + elif vector["buffer-sz"].find(":") != -1:
> + buf = vector["buffer-sz"].split(":")
> + if len(buf) != 3:
> + self.logger.info("buffer-sz format is invalid")
> + else:
> + temp = buf[0]
> + while temp <= buf[2]:
> + temp_list.append(temp)
> + temp_numb = temp_numb + 1
> + temp = temp + buf[1]
> + else:
> + temp_numb = 1
> + if temp_numb > buf_numb:
> + buf_numb = temp_numb
> + buf_list = copy.deepcopy(temp_list)
> +
> + head =
> "PMD,chain,ptest,cipher_algo,cipher_op,cipher_key,iv,auth_algo,auth_op,a
> uth_key,aad,digest,"
> + self.__LTCY = head
> + self.__THPT = head
> + self.total_buffer_list = copy.deepcopy(buf_list)
> + for buf_sz in buf_list:
> + self.__LTCY = self.__LTCY + "buf{buffer} Ltcy(us),buf{buffer}
> Cyc,".format(buffer=buf_sz)
> + self.__THPT = self.__THPT + "buf{buffer} Thpt(Gbps),buf{buffer}
> Ops,".format(buffer=buf_sz)
> + self.__LTCY = self.__LTCY[:len(self.__LTCY) - 1] + "\n"
> + self.__THPT = self.__THPT[:len(self.__THPT) - 1] + "\n"
> +
> + str_pid = str(os.getpid())
> + self.filename = "/tmp/test_crypto_perf_{0}.csv".format(time.time())
> + f = open(self.filename, "a")
> + if f is None:
> + self.logger.info("open scv file failed.")
> + return
> +
> + current_time = time.strftime('%Y-%m-%d %H:%M:%S',
> time.localtime(time.time()))
> + f.write("...Test Start [{time}]...\n".format(time=current_time))
> + f.write(self.__THPT)
> + f.write(self.__LTCY)
> + f.close()
> +
> + def __calculate_totall_cases_numb(self):
> + alg_map = {}
> + pmd_map = {}
> + map_combine = {}
> + count = 0
> + alg = ""
> + pmd = ""
> + alg_list = ["AES_CBC", "AES_CTR", "AES_GCM", "3DES_CBC",
> + "3DES_CTR", "SNOW3G", "KASUMI", "ZUC", "NULL", "MD_SHA"]
> + pmd_list = ["qat", "aesni_mb", "aesni_gcm", "snow3g",
> + "kasumi", "zuc", "openssl", "null"]
> + valid_map = {
> + "qat": ["AES_CBC", "AES_CTR", "AES_GCM", "3DES_CBC",
> + "3DES_CTR", "SNOW3G", "KASUMI", "NULL", "MD_SHA"],
> + "aesni_mb": ["AES_CBC", "AES_CTR"],
> + "aesni_gcm": ["AES_GCM"],
> + "snow3g": ["SNOW3G"],
> + "kasumi": ["KASUMI"],
> + "zuc": ["ZUC"],
> + "openssl": ["AES_CBC", "AES_CTR", "AES_GCM", "3DES_CBC",
> "3DES_CTR", "MD_SHA"],
> + "null": ["NULL"]
> + }
> +
> + for index, value in test_vectors.iteritems():
> + test_vector_list = self.__test_vector_to_vector_list(value,
> + core_mask="-1",
> + port_mask=self.port_mask)
> + count = count + len(test_vector_list)
> + for i in alg_list:
> + if (index.upper()).find(i) != -1:
> + alg = i
> + if i in alg_map:
> + alg_map[i] += len(test_vector_list)
> + else:
> + alg_map[i] = len(test_vector_list)
> + for j in pmd_list:
> + if (index).find(j) != -1:
> + pmd = j
> + if j in pmd_map:
> + pmd_map[j] += len(test_vector_list)
> + else:
> + pmd_map[j] = len(test_vector_list)
> + if (pmd != "") and (alg in valid_map[pmd]):
> + temp_str = pmd + "_" + alg
> + if temp_str in map_combine:
> + map_combine[temp_str] += len(test_vector_list)
> + else:
> + map_combine[temp_str] = len(test_vector_list)
> + for k, v in alg_map.iteritems():
> + self.logger.info("Total {name} cases:\t\t\t{number}".format(name=k,
> number=v))
> + for k, v in pmd_map.iteritems():
> + self.logger.info("Total {name} cases:\t\t\t{number}".format(name=k,
> number=v))
> + for k, v in map_combine.iteritems():
> + self.logger.info("Total {name} cases:\t\t\t{number}".format(name=k,
> number=v))
> + self.logger.info("Total cases:\t\t\t {0}".format(count))
> +
> + def __parse_througuput_data(self, original_out):
> + throughPut_line = ""
> + count = 0
> + data_finished = False
> + index = original_out.find("# lcore id")
> + if index == -1:
> + seg_index = original_out.find("Segmentation fault")
> + throughPut_line = "sgtf,sgtf" if seg_index != -1 else "otf,otf"
> + else:
> + value_data = (original_out[index:]).replace("\r", "")
> + value_list = (value_data.replace("\n\n", "\n")).split("\n")
> + temp_list = filter(lambda x: (x.find("lcore id") == -1) and (x != ""),
> value_list)
> + length = len(temp_list)
> + for data_list in temp_list:
> + count = count + 1
> + value_data_list = (data_list).split(";")
> + if length == count:
> + data_finished = True
> + throughPut_line = throughPut_line +
> self.__buffer_size_result_check(
> + value_data_list[1], value_data_list[8],
> + value_data_list[7], data_finished)
> + throughPut_line = throughPut_line + "\n"
> + return throughPut_line
> +
> + def __parse_latency_data(self, original_out):
> + latency = ""
> + count = 0
> + data_finished = False
> + index = original_out.find("# lcore")
> + if index == -1:
> + seg_index = original_out.find("Segmentation fault")
> + latency = "sgtf,sgtf" if seg_index != -1 else "otf,otf"
> + else:
> + value_data = (original_out[index:]).replace("\r", "")
> + value_list = (value_data.replace("\r", "")).split("\n")
> + temp_list = filter(lambda x: (x.find("lcore") == -1) and (x != ""),
> value_list)
> + length = len(temp_list)
> + for data_list in temp_list:
> + count = count + 1
> + value_data_list = data_list.split(";")
> + if length == count:
> + data_finished = True
> + latency = latency + self.__buffer_size_result_check(
> + value_data_list[1], value_data_list[5],
> + value_data_list[4], data_finished)
> + latency = latency + "\n"
> + return latency
> +
> + def __buffer_size_result_check(self, buf_size, thpt_ltcy, ops_cycl,
> finished):
> + count = 0
> + result = ""
> + buffer_sz = copy.deepcopy(self.total_buffer_list)
> +
> + for buf in self.waiting_to_coll_buf:
> + if int(buf_size) > int(buf):
> + count = count + 1
> + result = result + "*,*,"
> + elif int(buf_size) == int(buf):
> + count = count + 1
> + self.waiting_to_coll_buf = self.waiting_to_coll_buf[count:]
> + result = result + "{throughput_latenct},{ops_cycle},".format(
> + buffer=buf_size, throughput_latenct=thpt_ltcy,
> ops_cycle=ops_cycl)
> + else:
> + if finished is True:
> + result = result + "*,*,"
> + else:
> + break
> + return result
> +
> + def __parse_dut_out_data(self, original_out, test_vector):
> + perf_data_collect = ""
> + if test_vector["ptest"] == "latency":
> + perf_data_collect = self.__parse_latency_data(original_out)
> + else:
> + perf_data_collect = self.__parse_througuput_data(original_out)
> +
> + return perf_data_collect
> +
> + def __valid_data_write_line(self, test_vector):
> + iv = "{IV}".format(IV=test_vector["cipher-iv-sz"]) if test_vector["cipher-
> iv-sz"] != "" else "/"
> + aad = "{Aad}".format(Aad=test_vector["auth-aad-sz"]) if
> test_vector["auth-aad-sz"] != "" else "/"
> + ptest = (test_vector["ptest"]).upper()
> + optype = test_vector["optype"]
> + digest = "{dgst}".format(dgst=test_vector["auth-digest-sz"]) if
> test_vector["auth-digest-sz"] != "" else "/"
> + auth_op = (test_vector["auth-op"]).capitalize() if test_vector["auth-
> op"] != "" else "/"
> + devtype = ((test_vector["devtype"]).replace("crypto_", "")).upper()
> + auth_key = "{key}".format(key=test_vector["auth-key-sz"]) if
> test_vector["auth-key-sz"] != "" else "/"
> + cipher_op = (test_vector["cipher-op"]).capitalize() if
> test_vector["cipher-op"] != "" else "-"
> + auth_algo = ((test_vector["auth-algo"]).replace("-", "_")).upper() if
> test_vector["auth-algo"] != "" else "/"
> + cipher_key = "{key}".format(key=test_vector["cipher-key-sz"]) if
> test_vector["cipher-key-sz"] != "" else "/"
> + cipher_algo = ((test_vector["cipher-algo"]).replace("-", "_")).upper() if
> test_vector["cipher-algo"] != "" else "/"
> +
> + if optype.find("only") != -1:
> + chain = (optype.replace("-", "_")).upper()
> + else:
> + chain = ((optype.replace("-then-", "_")).replace("auth",
> "hash")).upper()
> +
> + w_line =
> "{pmd},{Chain},{test_type},{cAlg},{cop},{cKey},{IV},{hAlg},{hop},{hkey},{Aad
> },{dgst},".format(
> + pmd=devtype, Chain=chain, test_type=ptest, cAlg=cipher_algo,
> cop=cipher_op, cKey=cipher_key, IV=iv,
> + hAlg=auth_algo, hop=auth_op, hkey=auth_key, Aad=aad,
> dgst=digest)
> +
> + return w_line
> +
> + def __result_collection(self, original_out, test_vector):
> + result = True
> + perf_line = ""
> + f = open(self.filename, "a")
> + if f is None:
> + logger.info("open scv file failed.")
> + return
> + self.waiting_to_coll_buf = copy.deepcopy(self.total_buffer_list)
> + perf_line = self.__valid_data_write_line(test_vector) +
> self.__parse_dut_out_data(original_out, test_vector)
> + f.write(perf_line)
> +
> + if (perf_line.find("sgtf") != -1) or (perf_line.find("otf") != -1):
> + result = False
> + return result
> +
> + def __test_vector_to_cmd(self, test_vector, core_mask="",
> port_mask=""):
> + TEST_CRYPTO_PERF = "./app/test-crypto-perf/build/app/dpdk-test-
> crypto-perf"
> + EAL_CORE_MASK = " -cf" if core_mask == "" else " -c" + core_mask
> + EAL_SEP = " --"
> + QUEUE_NUM = " "
> + CSV_FRIENDLY = " --csv-friendly"
> +
> + # port info
> + pci_bus = ""
> + for port in self.dut.ports_info:
> + pci_bus = " -w " + port['pci']
> +
> + qat_bus = ""
> + if len(self.qat_wilte_list) > 0:
> + qat_bus = " -w " + self.qat_wilte_list[random.randint(0,
> len(self.qat_wilte_list) - 1)]
> +
> + vdev = ""
> + if self.__check_field_in_vector(test_vector, "vdev"):
> + vdev = " --vdev " + test_vector["vdev"]
> +
> + ptest = ""
> + if self.__check_field_in_vector(test_vector, "ptest"):
> + ptest = " --ptest " + test_vector["ptest"]
> +
> + devtype = ""
> + if self.__check_field_in_vector(test_vector, "devtype"):
> + devtype = " --devtype " + test_vector["devtype"]
> +
> + chain = ""
> + if self.__check_field_in_vector(test_vector, "optype"):
> + chain = " --optype " + test_vector["optype"]
> +
> + cipher_algo = ""
> + if self.__check_field_in_vector(test_vector, "cipher-algo"):
> + cipher_algo = " --cipher-algo " + test_vector["cipher-algo"]
> +
> + cipher_op = ""
> + if self.__check_field_in_vector(test_vector, "cipher-op"):
> + cipher_op = " --cipher-op " + test_vector["cipher-op"]
> +
> + cipher_key = ""
> + if self.__check_field_in_vector(test_vector, "cipher-key-sz"):
> + cipher_key = " --cipher-key-sz
> {size}".format(size=test_vector["cipher-key-sz"])
> +
> + iv = ""
> + if self.__check_field_in_vector(test_vector, "cipher-iv-sz"):
> + iv = " --cipher-iv-sz {size}".format(size=test_vector["cipher-iv-sz"])
> +
> + auth_algo = ""
> + if self.__check_field_in_vector(test_vector, "auth-algo"):
> + auth_algo = " --auth-algo " + test_vector["auth-algo"]
> +
> + auth_op = ""
> + if self.__check_field_in_vector(test_vector, "auth-op"):
> + auth_op = " --auth-op " + test_vector["auth-op"]
> +
> + auth_key = ""
> + if self.__check_field_in_vector(test_vector, "auth-key-sz"):
> + auth_key = " --auth-key-sz {size}".format(size=test_vector["auth-
> key-sz"])
> +
> + aad = ""
> + if self.__check_field_in_vector(test_vector, "auth-aad-sz"):
> + aad = " --auth-aad-sz {size}".format(size=test_vector["auth-aad-sz"])
> +
> + digest = ""
> + if self.__check_field_in_vector(test_vector, "auth-digest-sz"):
> + digest = " --auth-digest-sz {size}".format(size=test_vector["auth-
> digest-sz"])
> +
> + total_ops = ""
> + if self.__check_field_in_vector(test_vector, "total-ops"):
> + total_ops = " --total-ops {size}".format(size=test_vector["total-ops"])
> +
> + burst_size = ""
> + if self.__check_field_in_vector(test_vector, "burst-sz"):
> + burst_size = " --burst-sz {size}".format(size=test_vector["burst-sz"])
> +
> + buffer_size = ""
> + if self.__check_field_in_vector(test_vector, "buffer-sz"):
> + buffer_size = " --buffer-sz {size}".format(size=test_vector["buffer-
> sz"])
> +
> + cmd_str = "".join([TEST_CRYPTO_PERF, EAL_CORE_MASK, vdev,
> pci_bus, qat_bus, EAL_SEP, QUEUE_NUM,
> + ptest, devtype, chain, cipher_algo, cipher_op, cipher_key, iv,
> auth_algo,
> + auth_op, auth_key, aad, digest, total_ops, burst_size,
> buffer_size, CSV_FRIENDLY])
> +
> + return cmd_str
> +
> + def __check_field_in_vector(self, test_vector, field_name):
> + if field_name in test_vector and test_vector[field_name]:
> + return True
> + return False
> +
> + def __format_hex_to_param(self, hex_str, sep=":", prefix=""):
> + if not hex_str:
> + return ""
> + if len(hex_str) == 1:
> + return prefix + "0" + hex_str
> +
> + result = prefix + hex_str[0:2]
> + for i in range(2, len(hex_str), 2):
> + if len(hex_str) < i + 2:
> + result = result + sep + "0" + hex_str[i:]
> + else:
> + result = result + sep + hex_str[i:i+2]
> +
> + return result
> +
> + def __var2list(self, var):
> + var_list = var if isinstance(var, list) else [var]
> + return var_list
> +
> + def __is_valid_op(self, chain, op):
> + chain_op_map = {
> + "aead": ["encrypt", "generate"],
> + "cipher-only": ["encrypt", "decrypt"],
> + "auth-only": ["generate", "verify"],
> + "cipher-then-auth": ["encrypt", "generate"],
> + "auth-then-cipher": ["decrypt", "verify"],
> + }
> + if op in chain_op_map[chain]:
> + return True
> + return False
> +
> + def __is_valid_size(self, key_type, algo, size):
> + algo_size_map = {
> + "aes-cbc": {
> + "cipher-key-sz": [16, 24, 32],
> + "cipher-iv-sz": [16]
> + },
> + "aes-ctr": {
> + "cipher-key-sz": [16, 24, 32],
> + "cipher-iv-sz": [16]
> + },
> + "3des-cbc": {
> + "cipher-key-sz": [16, 24],
> + "cipher-iv-sz": [8]
> + },
> + "3des-ctr": {
> + "cipher-key-sz": [16, 24],
> + "cipher-iv-sz": [8]
> + },
> + "aes-gcm": {
> + "cipher-key-sz": [16, 24, 32],
> + "auth-key-sz": [16, 24, 32],
> + "auth-aad-sz": [1, 2, 3, 4, 5, 6, 8, 9, 12, 16, 24, 32, 64, 128, 155, 256,
> 1024, 65535],
> + "cipher-iv-sz": [12, 16],
> + "auth-digest-sz": [16]
> + },
> + "snow3g-uea2": {
> + "cipher-key-sz": [16],
> + "cipher-iv-sz": [16]
> + },
> + "kasumi-f8": {
> + "cipher-key-sz": [16],
> + "cipher-iv-sz": [8]
> + },
> + "zuc-eea3": {
> + "cipher-key-sz": [16],
> + "cipher-iv-sz": [16]
> + },
> + "null": {
> + "cipher-key-sz": [0],
> + "auth-key-sz": [0],
> + "auth-aad-sz": [0],
> + "cipher-iv-sz": [0],
> + "auth-digest-sz": [0]
> + },
> + "md5-hmac": {
> + "auth-key-sz": [64],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [16]
> + },
> + "sha1-hmac": {
> + "auth-key-sz": [64],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [20]
> + },
> + "sha2-224-hmac": {
> + "auth-key-sz": [64],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [28]
> + },
> + "sha2-256-hmac": {
> + "auth-key-sz": [64],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [32]
> + },
> + "sha2-384-hmac": {
> + "auth-key-sz": [128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [48]
> + },
> + "sha2-512-hmac": {
> + "auth-key-sz": [128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [64]
> + },
> + "aes-gmac": {
> + "auth-key-sz": [16, 24, 32],
> + "auth-aad-sz": [1, 2, 3, 4, 5, 6, 8, 9, 12, 16, 24, 32, 64, 128, 155, 256,
> 1024, 65535],
> + "auth-digest-sz": [16]
> + },
> + "aes-xcbc-hmac": {
> + "auth-key-sz": [16],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [16]
> + },
> + "snow3g-uia2": {
> + "auth-key-sz": [16],
> + "auth-aad-sz": [16],
> + "auth-digest-sz": [4]
> + },
> + "kasumi-f9": {
> + "auth-key-sz": [16],
> + "auth-aad-sz": [8],
> + "auth-digest-sz": [4]
> + },
> + "zuc-eia3": {
> + "auth-key-sz": [16],
> + "auth-aad-sz": [16],
> + "auth-digest-sz": [4]
> + },
> + "md5": {
> + "auth-key-sz": [0],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [16]
> + },
> + "sha1": {
> + "auth-key-sz": [0],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [20]
> + },
> + "sha2-224": {
> + "auth-key-sz": [0],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [28]
> + },
> + "sha2-256": {
> + "auth-key-sz": [0],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [32]
> + },
> + "sha2-384": {
> + "auth-key-sz": [0],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [48]
> + },
> + "sha2-512": {
> + "auth-key-sz": [0],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [64]
> + },
> + }
> + result = False
> + if algo in algo_size_map:
> + if key_type in algo_size_map[algo]:
> + if size in algo_size_map[algo][key_type]:
> + result = True
> + return result
> +
> + def __actually_aesni_mb_digest(self, vector):
> +
> + if ((vector["vdev"]).find("crypto_aesni_mb") == -1):
> + return
> +
> + auth_algo_dgst_map = {
> + "md5-hmac": 12,
> + "sha1-hamc": 12,
> + "sha2-224-hamc": 14,
> + "sha2-256-hamc": 16,
> + "sha2-384-hamc": 24,
> + "sha2-512-hamc": 32
> + }
> + if vector["auth-algo"] in auth_algo_dgst_map:
> + digest = auth_algo_dgst_map[vector["auth-algo"]]
> + vector["auth-digest-sz"] = digest
> +
> + def __iter_optype(self, vector, vector_list, core_mask="", port_mask=""):
> + test_vector = vector.copy()
> + chain_list = self.__var2list(test_vector["optype"])
> + for op_type in chain_list:
> + test_vector = vector.copy()
> + test_vector["optype"] = op_type
> + self.__iter_cipher_algo(test_vector, vector_list, core_mask,
> port_mask)
> +
> + def __iter_cipher_algo(self, vector, vector_list, core_mask="",
> port_mask=""):
> + test_vector = vector.copy()
> + if test_vector["optype"] == "auth-only":
> + test_vector["cipher-algo"] = ""
> + self.__iter_cipher_op(test_vector, vector_list, core_mask,
> port_mask)
> + else:
> + cipher_algo_list = self.__var2list(test_vector["cipher-algo"])
> + for cipher_algo in cipher_algo_list:
> + test_vector = vector.copy()
> + test_vector["cipher-algo"] = cipher_algo
> + self.__iter_cipher_op(test_vector, vector_list, core_mask,
> port_mask)
> +
> + def __iter_cipher_op(self, vector, vector_list, core_mask="",
> port_mask=""):
> + test_vector = vector.copy()
> + if test_vector["optype"] == "auth-only":
> + test_vector["cipher-op"] = ""
> + self.__iter_cipher_key(test_vector, vector_list, core_mask,
> port_mask)
> + else:
> + cipher_op_list = self.__var2list(test_vector["cipher-op"])
> + for cipher_op in cipher_op_list:
> + if self.__is_valid_op(test_vector["optype"], cipher_op):
> + test_vector = vector.copy()
> + test_vector["cipher-op"] = cipher_op
> + self.__iter_cipher_key(test_vector, vector_list,
> + core_mask, port_mask)
> +
> + def __iter_cipher_key(self, vector, vector_list, core_mask="",
> port_mask=""):
> + test_vector = vector.copy()
> + if test_vector["optype"] == "auth-only":
> + test_vector["cipher-key-sz"] = ""
> + self.__iter_iv(test_vector, vector_list, core_mask, port_mask)
> + else:
> + cipher_key_list = self.__var2list(test_vector["cipher-key-sz"])
> + for cipher_key in cipher_key_list:
> + test_vector = vector.copy()
> + if isinstance(cipher_key, int):
> + if self.__is_valid_size("cipher-key-sz",
> + test_vector["cipher-algo"],
> + cipher_key):
> + test_vector["cipher-key-sz"] = cipher_key
> + self.__iter_iv(test_vector, vector_list, core_mask, port_mask)
> + else:
> + continue
> + else:
> + test_vector["cipher-key-sz"] = 0
> + self.__iter_iv(test_vector, vector_list, core_mask, port_mask)
> +
> + def __iter_iv(self, vector, vector_list, core_mask="", port_mask=""):
> + test_vector = vector.copy()
> + if test_vector["optype"] == "auth-only":
> + test_vector["cipher-iv-sz"] = ""
> + self.__iter_auth_algo(test_vector, vector_list, core_mask, port_mask)
> + else:
> + iv_list = self.__var2list(test_vector["cipher-iv-sz"])
> + for iv in iv_list:
> + test_vector = vector.copy()
> + if isinstance(iv, int):
> + if self.__is_valid_size("cipher-iv-sz",
> + test_vector["cipher-algo"],
> + iv):
> + test_vector["cipher-iv-sz"] = iv
> + self.__iter_auth_algo(test_vector, vector_list, core_mask,
> port_mask)
> + else:
> + continue
> + else:
> + test_vector["cipher-iv-sz"] = 0
> + self.__iter_auth_algo(test_vector, vector_list,
> + core_mask, port_mask)
> +
> + def __iter_auth_algo(self, vector, vector_list, core_mask="",
> port_mask=""):
> + test_vector = vector.copy()
> + if test_vector["optype"] == "cipher-only":
> + test_vector["auth-algo"] = ""
> + self.__iter_auth_op(test_vector, vector_list, core_mask, port_mask)
> + else:
> + auth_algo_list = self.__var2list(test_vector["auth-algo"])
> + for auth_algo in auth_algo_list:
> + test_vector = vector.copy()
> + test_vector["auth-algo"] = auth_algo
> + self.__iter_auth_op(test_vector, vector_list, core_mask,
> port_mask)
> +
> + def __iter_auth_op(self, vector, vector_list, core_mask="",
> port_mask=""):
> + test_vector = vector.copy()
> + if test_vector["optype"] == "cipher-only":
> + test_vector["auth-op"] = ""
> + self.__iter_auth_key(test_vector, vector_list, core_mask, port_mask)
> + else:
> + auth_op_list = self.__var2list(test_vector["auth-op"])
> + for auth_op in auth_op_list:
> + if self.__is_valid_op(test_vector["optype"], auth_op):
> + test_vector = vector.copy()
> + test_vector["auth-op"] = auth_op
> + self.__iter_auth_key(test_vector, vector_list,
> + core_mask, port_mask)
> +
> + def __iter_auth_key(self, vector, vector_list, core_mask="",
> port_mask=""):
> + test_vector = vector.copy()
> + if test_vector["optype"] == "cipher-only":
> + test_vector["auth-key-sz"] = ""
> + self.__iter_aad(test_vector, vector_list, core_mask, port_mask)
> + else:
> + auth_key_list = self.__var2list(test_vector["auth-key-sz"])
> + for auth_key in auth_key_list:
> + test_vector = vector.copy()
> + if isinstance(auth_key, int):
> + if self.__is_valid_size("auth-key-sz",
> + test_vector["auth-algo"],
> + auth_key):
> + test_vector["auth-key-sz"] = auth_key
> + self.__iter_aad(test_vector, vector_list, core_mask, port_mask)
> + else:
> + continue
> + else:
> + test_vector["auth-key-sz"] = 0
> + self.__iter_aad(test_vector, vector_list, core_mask, port_mask)
> +
> + def __iter_aad(self, vector, vector_list, core_mask="", port_mask=""):
> + test_vector = vector.copy()
> + if test_vector["optype"] == "cipher-only":
> + test_vector["auth-aad-sz"] = ""
> + self.__iter_digest(test_vector, vector_list, core_mask, port_mask)
> + else:
> + aad_list = self.__var2list(test_vector["auth-aad-sz"])
> + for aad in aad_list:
> + test_vector = vector.copy()
> + if isinstance(aad, int):
> + if self.__is_valid_size("auth-aad-sz",
> + test_vector["auth-algo"],
> + aad):
> + test_vector["auth-aad-sz"] = aad
> + self.__iter_digest(test_vector, vector_list,
> + core_mask, port_mask)
> + else:
> + continue
> + else:
> + test_vector["auth-aad-sz"] = 0
> + self.__iter_digest(test_vector, vector_list,
> + core_mask, port_mask)
> +
> + def __iter_digest(self, vector, vector_list, core_mask="", port_mask=""):
> + test_vector = vector.copy()
> + if test_vector["optype"] == "cipher-only":
> + test_vector["auth-digest-sz"] = ""
> + self.__iter_buffer_size(test_vector, vector_list,
> + core_mask, port_mask)
> + else:
> + digest_list = self.__var2list(vector["auth-digest-sz"])
> + for digest in digest_list:
> + test_vector = vector.copy()
> + if isinstance(digest, int):
> + if self.__is_valid_size("auth-digest-sz",
> + test_vector["auth-algo"],
> + digest):
> + test_vector["auth-digest-sz"] = digest
> + else:
> + continue
> + else:
> + test_vector["auth-digest-sz"] = 0
> + self.__actually_aesni_mb_digest(test_vector)
> + self.__iter_buffer_size(test_vector, vector_list,
> + core_mask, port_mask)
> +
> + def __iter_buffer_size(self, vector, vector_list, core_mask="",
> port_mask=""):
> + test_vector = vector.copy()
> + buffer_sz_list = vector["buffer-sz"]
> + if buffer_sz_list == "":
> + buffer_sz_list = "32,64,128,256, 512,768, 1024,1280,1536,1792,2048"
> + test_vector["buffer-sz"] = buffer_sz_list
> + vector_list.append(test_vector)
> +
> + def __test_vector_to_vector_list(self, test_vector, core_mask="",
> port_mask=""):
> + vector_list = []
> + ptest_list = self.__var2list(test_vector["ptest"])
> + for ptest in ptest_list:
> + test_vector["ptest"] = ptest
> + self.__iter_optype(test_vector, vector_list, core_mask, port_mask)
> +
> + return vector_list
> +
> +test_vectors = {
> +
> + "qat_c_AES_CBC_Perf": {
> + "vdev": "",
> + "devtype": "crypto_qat",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "cipher-then-auth"],
> + "cipher-algo": ["aes-cbc"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16, 24, 32],
> + "cipher-iv-sz": [16],
> + "auth-algo": ["md5-hmac", "sha1-hmac", "sha2-224-hmac", "sha2-256-
> hmac",
> + "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [8, 16, 24, 32, 40, 48, 56, 64, 128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [16, 20, 28, 32, 48, 64],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "qat_c_AES_CTR_Perf": {
> + "vdev": "",
> + "devtype": "crypto_qat",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "cipher-then-auth"],
> + "cipher-algo": ["aes-ctr"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16, 24, 32],
> + "cipher-iv-sz": [16],
> + "auth-algo": ["md5-hmac", "sha1-hmac", "sha2-224-hmac", "sha2-256-
> hmac",
> + "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [16, 24, 32, 40, 48, 56, 64, 128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [16, 20, 28, 32, 48, 64],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "qat_c_AES_GCM_Perf": {
> + "vdev": "",
> + "devtype": "crypto_qat",
> + "ptest": ["throughput", "latency"],
> + "optype": ["aead"],
> + "cipher-algo": ["aes-gcm"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16, 24, 32],
> + "cipher-iv-sz": [16],
> + "auth-algo": ["aes-gcm", "aes-gmac", "md5-hmac", "sha1-hmac", "sha2-
> 224-hmac", "sha2-256-hmac",
> + "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [8, 16, 24, 32, 40, 48, 56, 64, 128],
> + "auth-aad-sz": [0, 8, 12],
> + "auth-digest-sz": [8, 12, 16, 20, 28, 32, 48, 64],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "qat_c_3DES_CBC_Perf": {
> + "vdev": "",
> + "devtype": "crypto_qat",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "cipher-then-auth"],
> + "cipher-algo": ["3des-cbc"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16, 24],
> + "cipher-iv-sz": [8],
> + "auth-algo": ["md5-hmac", "sha1-hmac", "sha2-224-hmac", "sha2-256-
> hmac",
> + "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [16, 24, 32, 40, 48, 56, 64, 128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [16, 20, 28, 32, 48, 64],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "qat_c_3DES_CTR_Perf": {
> + "vdev": "",
> + "devtype": "crypto_qat",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "cipher-then-auth"],
> + "cipher-algo": ["3des-ctr"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16, 24],
> + "cipher-iv-sz": [8],
> + "auth-algo": ["md5-hmac", "sha1-hmac", "sha2-224-hmac", "sha2-256-
> hmac",
> + "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [16, 24, 32, 40, 48, 56, 64, 128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [16, 20, 28, 32, 48, 64],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "qat_c_KASUMMI_Perf": {
> + "vdev": "",
> + "devtype": "crypto_qat",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "cipher-then-auth"],
> + "cipher-algo": ["kasumi-f8"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16],
> + "cipher-iv-sz": [8],
> + "auth-algo": ["kasumi-f9"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [16],
> + "auth-aad-sz": [8],
> + "auth-digest-sz": [4],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "qat_c_SNOW3G_Perf": {
> + "vdev": "",
> + "devtype": "crypto_qat",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "cipher-then-auth"],
> + "cipher-algo": ["snow3g-uea2"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16],
> + "cipher-iv-sz": [16],
> + "auth-algo": ["snow3g-uia2"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [16],
> + "auth-aad-sz": [16],
> + "auth-digest-sz": [4],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "qat_h_auto_Perf": {
> + "vdev": "",
> + "devtype": "crypto_qat",
> + "ptest": ["throughput", "latency"],
> + "optype": ["auth-only"],
> + "cipher-algo": "",
> + "cipher-op": "",
> + "cipher-key-sz": "",
> + "cipher-iv-sz": "",
> + "auth-algo": ["aes-gcm", "aes-gmac", "kasumi-f9", "snow3g-uia2",
> "md5-hmac",
> + "sha1-hmac", "sha2-224-hmac", "sha2-256-hmac", "sha2-384-
> hmac",
> + "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [8, 16, 24, 32, 40, 48, 56, 64, 128],
> + "auth-aad-sz": [0, 8, 12],
> + "auth-digest-sz": [4, 8, 12, 16, 20, 28, 32, 48, 64],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "qat_NULL_auto_Perf": {
> + "vdev": "",
> + "devtype": "crypto_qat",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only"],
> + "cipher-algo": ["null"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [0],
> + "cipher-iv-sz": [0],
> + "auth-algo": ["null"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [0],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [0],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "aesni_mb_c_AES_CBC_Perf": {
> + "vdev": "crypto_aesni_mb_pmd",
> + "devtype": "crypto_aesni_mb",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "cipher-then-auth"],
> + "cipher-algo": ["aes-cbc"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16, 24, 32],
> + "cipher-iv-sz": [16],
> + "auth-algo": ["md5-hmac", "sha1-hmac", "sha2-224-hmac", "sha2-256-
> hmac",
> + "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [8, 16, 24, 32, 40, 48, 56, 64, 128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [12, 14, 16, 24, 32],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "aesni_mb_c_AES_CTR_Perf": {
> + "vdev": "crypto_aesni_mb_pmd",
> + "devtype": "crypto_aesni_mb",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "cipher-then-auth"],
> + "cipher-algo": ["aes-ctr"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16, 24, 32],
> + "cipher-iv-sz": [16],
> + "auth-algo": ["md5-hmac", "sha1-hmac", "sha2-224-hmac", "sha2-256-
> hmac",
> + "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [8, 16, 24, 32, 40, 48, 56, 64, 128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [12, 14, 16, 24, 32],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "aesni_mb_h_auto_Perf": {
> + "vdev": "crypto_aesni_mb_pmd",
> + "devtype": "crypto_aesni_mb",
> + "ptest": ["throughput", "latency"],
> + "optype": ["auth-only", "cipher-then-auth"],
> + "cipher-algo": "",
> + "cipher-op": "",
> + "cipher-key-sz": "",
> + "cipher-iv-sz": "",
> + "auth-algo": ["md5-hmac", "sha1-hmac", "sha2-224-hmac", "sha2-256-
> hmac",
> + "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [8, 16, 24, 32, 40, 48, 56, 64, 128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [12, 14, 16, 24, 32],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "aes_gcm_c_AES_GCM_Perf": {
> + "vdev": "crypto_aesni_gcm_pmd",
> + "devtype": "crypto_aesni_gcm",
> + "ptest": ["throughput", "latency"],
> + "optype": ["aead"],
> + "cipher-algo": ["aes-gcm"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16, 32],
> + "cipher-iv-sz": [12],
> + "auth-algo": ["aes-gcm", "aes-gmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [16, 32],
> + "auth-aad-sz": [1, 4, 8, 12, 16, 65535],
> + "auth-digest-sz": [8, 12, 16],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "kasumi_KASUMI_auto_Perf": {
> + "vdev": "crypto_kasumi_pmd",
> + "devtype": "crypto_kasumi",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "auth-only", "cipher-then-auth"],
> + "cipher-algo": ["kasumi-f8"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16],
> + "cipher-iv-sz": [8],
> + "auth-algo": ["kasumi-f9"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [16],
> + "auth-aad-sz": [8],
> + "auth-digest-sz": [4],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "snow3g_SNOW3G_auto_Perf": {
> + "vdev": "crypto_snow3g_pmd",
> + "devtype": "crypto_snow3g",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "auth-only", "cipher-then-auth"],
> + "cipher-algo": ["snow3g-uea2"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16],
> + "cipher-iv-sz": [16],
> + "auth-algo": ["snow3g-uia2"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [16],
> + "auth-aad-sz": [16],
> + "auth-digest-sz": [4],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "zuc_ZUC_auto_Perf": {
> + "vdev": "crypto_zuc_pmd",
> + "devtype": "crypto_zuc",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "auth-only", "cipher-then-auth"],
> + "cipher-algo": ["zuc-eea3"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16],
> + "cipher-iv-sz": [16],
> + "auth-algo": ["zuc-eia3"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [16],
> + "auth-aad-sz": [16],
> + "auth-digest-sz": [4],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "null_NULL_auto_Perf": {
> + "vdev": "",
> + "devtype": "crypto_qat",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only"],
> + "cipher-algo": ["null"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [0],
> + "cipher-iv-sz": [0],
> + "auth-algo": ["null"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [0],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [0],
> + "buffer-sz": "32,64,128,256,512,768,1024,1280,1536,1792,2048",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "openssl_c_AES_CBC_Perf": {
> + "vdev": "crypto_openssl_pmd",
> + "devtype": "crypto_openssl",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "cipher-then-auth"],
> + "cipher-algo": ["aes-cbc"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16, 24, 32],
> + "cipher-iv-sz": [16],
> + "auth-algo": ["md5", "sha1", "sha2-224", "sha2-256", "sha2-384", "sha2-
> 512",
> + "md5-hmac", "sha1-hmac", "sha2-224-hmac", "sha2-256-hmac",
> + "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [0, 64, 128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [16, 20, 28, 32, 48, 64],
> + "buffer-sz": "32,64,128,256",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "openssl_c_AES_CTR_Perf": {
> + "vdev": "crypto_openssl_pmd",
> + "devtype": "crypto_openssl",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "cipher-then-auth"],
> + "cipher-algo": ["aes-ctr"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16, 24, 32],
> + "cipher-iv-sz": [16],
> + "auth-algo": ["md5", "sha1", "sha2-224", "sha2-256", "sha2-384", "sha2-
> 512",
> + "md5-hmac", "sha1-hmac", "sha2-224-hmac", "sha2-256-hmac",
> + "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [0, 64, 128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [16, 20, 28, 32, 48, 64],
> + "buffer-sz": "32,64,128,256",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "openssl_c_AES_GCM_Perf": {
> + "vdev": "crypto_openssl_pmd",
> + "devtype": "crypto_openssl",
> + "ptest": ["throughput", "latency"],
> + "optype": ["aead"],
> + "cipher-algo": ["aes-gcm"],
> + "cipher-op": ["aead"],
> + "cipher-key-sz": [16],
> + "cipher-iv-sz": [12, 16],
> + "auth-algo": ["aes-gcm", "aes-gmac", "md5", "sha1", "sha2-224", "sha2-
> 256",
> + "sha2-384", "sha2-512", "md5-hmac", "sha1-hmac", "sha2-224-
> hmac",
> + "sha2-256-hmac", "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [0, 16, 24, 32, 64, 128],
> + "auth-aad-sz": [0, 8, 12],
> + "auth-digest-sz": [8, 12, 16, 20, 28, 32, 48, 64],
> + "buffer-sz": "32,64,128,256",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "openssl_c_3DES_CBC_Perf": {
> + "vdev": "crypto_openssl_pmd",
> + "devtype": "crypto_openssl",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "cipher-then-auth"],
> + "cipher-algo": ["3des-cbc"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16, 24],
> + "cipher-iv-sz": [8],
> + "auth-algo": ["md5", "sha1", "sha2-224", "sha2-256", "sha2-384", "sha2-
> 512",
> + "md5-hmac", "sha1-hmac", "sha2-224-hmac", "sha2-256-hmac",
> + "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [0, 64, 128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [16, 20, 28, 32, 48, 64],
> + "buffer-sz": "32,64",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "openssl_c_3DES_CTR_Perf": {
> + "vdev": "crypto_openssl_pmd",
> + "devtype": "crypto_openssl",
> + "ptest": ["throughput", "latency"],
> + "optype": ["cipher-only", "cipher-then-auth"],
> + "cipher-algo": ["3des-ctr"],
> + "cipher-op": ["encrypt", "decrypt"],
> + "cipher-key-sz": [16, 24],
> + "cipher-iv-sz": [8],
> + "auth-algo": ["md5", "sha1", "sha2-224", "sha2-256", "sha2-384", "sha2-
> 512",
> + "md5-hmac", "sha1-hmac", "sha2-224-hmac", "sha2-256-hmac",
> + "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [0, 64, 128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [16, 20, 28, 32, 48, 64],
> + "buffer-sz": "32,64",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +
> + "openssl_h_HASH_auto_Perf": {
> + "vdev": "crypto_openssl_pmd",
> + "devtype": "crypto_openssl",
> + "ptest": ["throughput", "latency"],
> + "optype": ["auth-only"],
> + "cipher-algo": "",
> + "cipher-op": "",
> + "cipher-key-sz": "",
> + "cipher-iv-sz": "",
> + "auth-algo": ["md5", "sha1", "sha2-224", "sha2-256", "sha2-384", "sha2-
> 512",
> + "md5-hmac", "sha1-hmac", "sha2-224-hmac", "sha2-256-hmac",
> + "sha2-384-hmac", "sha2-512-hmac"],
> + "auth-op": ["generate"],
> + "auth-key-sz": [0, 64, 128],
> + "auth-aad-sz": [0],
> + "auth-digest-sz": [16, 20, 28, 32, 48, 64],
> + "buffer-sz": "32,64",
> + "burst-sz": 32,
> + "total-ops": 10000000
> + },
> +}
> --
> 2.5.5
More information about the dts
mailing list