[dts] [PATCH V2 1/2] test_plans/vlan_ethertype_config_test_plan: using outer instead inner to config single vlan tpid

[Liu, Yong]

Thanks, applied.

On 03/27/2017 10:54 AM, Lijuan Tu wrote:
>      fix single VLAN tag to be outer VLAN tag
>
>      i40e refer to dpdpk commit: 5b2d37858d32ec6aba78f15dc065f286108d6b4e
>      ixgbe refer to dpdk commit: 2b84092427b1800cba7d3204b95703b1718fcd28
>
> Signed-off-by: Lijuan Tu <lijuanx.a.tu at intel.com>
> ---
>   test_plans/vlan_ethertype_config_test_plan.rst | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/test_plans/vlan_ethertype_config_test_plan.rst b/test_plans/vlan_ethertype_config_test_plan.rst
> index 27dbda7..9d565e7 100644
> --- a/test_plans/vlan_ethertype_config_test_plan.rst
> +++ b/test_plans/vlan_ethertype_config_test_plan.rst
> @@ -65,7 +65,7 @@ testpmd> start
>   
>   2) change VLAN TPIDs to 0xA100,
>   
> -testpmd> vlan set inner tpid 0xA100 0
> +testpmd> vlan set outer tpid 0xA100 0
>   
>   3) send a packet with VLAN TPIDs = 0xA100, verify it can be recognized as vlan packet.
>   
> @@ -108,7 +108,7 @@ Verify that the VLAN packet can be received in port ``B`` and TPID is 0x8100
>   
>   4) Change VLAN TPID to 0xA100 on port ``0``
>   
> -testpmd> vlan set inner tpid 0xA100 0
> +testpmd> vlan set outer tpid 0xA100 0
>   
>   5) send 1 packet with VLAN TPID 0xA100 and VLAN Tag 16 on port ``A``,
>   Verify that the VLAN packet can be received in port ``B`` and TPID is 0xA100
> @@ -136,7 +136,7 @@ Verify that packet received in port ``B`` without VLAN Tag Identifier
>   
>   3) Change VLAN TPID to 0xA100 on port ``0``
>   
> -testpmd> vlan set inner tpid 0xA100 0
> +testpmd> vlan set outer tpid 0xA100 0
>   
>   4) send 1 packet with VLAN TPID 0xA100 and VLAN Tag 16 on port ``A``,
>   Verify that packet received in port ``B`` without VLAN Tag Identifier
> @@ -169,7 +169,7 @@ Verify that packet received in port ``B`` with VLAN Tag Identifier 16 and TPID i
>   
>   4) Change VLAN TPID to 0xA100 on port ``1``
>   
> -testpmd> vlan set inner tpid 0xA100 1
> +testpmd> vlan set outer tpid 0xA100 1
>   
>   5)send 1 packet without VLAN Tag Identifier on port ``A``,
>   Verify that packet received in port ``B`` with VLAN Tag Identifier 16 and TPID is 0xA100.